From b58847eba99d9a3e83bbba2f0e4802088da3a23c Mon Sep 17 00:00:00 2001
From: mindchasers <privateisland@mindchasers.com>
Date: Fri, 20 Nov 2020 00:11:44 -0500
Subject: top: move darsena top under ecp5um folder

---
 manufacturer/lattice/ecp5um/privateisland.ldf |    4 +-
 manufacturer/lattice/ecp5um/source/top.v      | 2432 +++++++++++++++++++++++++
 source/top.v                                  | 2432 -------------------------
 3 files changed, 2434 insertions(+), 2434 deletions(-)
 create mode 100644 manufacturer/lattice/ecp5um/source/top.v
 delete mode 100644 source/top.v

diff --git a/manufacturer/lattice/ecp5um/privateisland.ldf b/manufacturer/lattice/ecp5um/privateisland.ldf
index 803a037..1968d1b 100644
--- a/manufacturer/lattice/ecp5um/privateisland.ldf
+++ b/manufacturer/lattice/ecp5um/privateisland.ldf
@@ -10,8 +10,8 @@
             <Option name="lib" value="work"/>
             <Option name="top" value="top"/>
         </Options>
-        <Source name="../../../source/top.v" type="Verilog" type_short="Verilog">
-            <Options top_module="top"/>
+        <Source name="source/top.v" type="Verilog" type_short="Verilog">
+            <Options/>
         </Source>
         <Source name="../../../source/bin_to_ascii.v" type="Verilog" type_short="Verilog">
             <Options/>
diff --git a/manufacturer/lattice/ecp5um/source/top.v b/manufacturer/lattice/ecp5um/source/top.v
new file mode 100644
index 0000000..4944bae
--- /dev/null
+++ b/manufacturer/lattice/ecp5um/source/top.v
@@ -0,0 +1,2432 @@
+/*
+ *       top.v
+ *
+ *       Copyright (C) 2018, 2019, 2020 Mind Chasers Inc.
+ *       
+ *   Licensed under the Apache License, Version 2.0 (the "License");
+ *   you may not use this file except in compliance with the License.
+ *   You may obtain a copy of the License at
+ *
+ *       http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *   Unless required by applicable law or agreed to in writing, software
+ *   distributed under the License is distributed on an "AS IS" BASIS,
+ *   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *   See the License for the specific language governing permissions and
+ *   limitations under the License.
+ *   
+ *   Private Island Top for Darsena / ECP5UM
+ *
+ */
+
+module top(
+	input  rstn,
+
+	// REFCLK
+	input refclkp_d0, refclkn_d0, 
+	input refclkp_d1, refclkn_d1,
+
+	// SGMII0
+	input	sgmii0_hdinp,
+	input	sgmii0_hdinn,
+	output	sgmii0_hdoutp,
+	output	sgmii0_hdoutn,
+	
+	// SGMII1
+	input	sgmii1_hdinp,
+	input	sgmii1_hdinn,
+	output	sgmii1_hdoutp,
+	output	sgmii1_hdoutn,
+	
+	// SGMII2
+	input	sgmii2_hdinp,
+	input	sgmii2_hdinn,
+	output	sgmii2_hdoutp,
+	output	sgmii2_hdoutn,
+	
+	// SGMII3
+	input	sgmii3_hdinp,
+	input	sgmii3_hdinn,
+	output	sgmii3_hdoutp,
+	output	sgmii3_hdoutn,
+	
+	// PHYs
+	output phy_mdc,
+	
+	output phy0_resetn,
+	inout phy0_mdio,
+	input [1:0] phy0_gpio,
+	input phy0_intn,
+	
+	output phy1_resetn,
+	inout phy1_mdio,
+	input [1:0] phy1_gpio,
+	input phy1_intn,
+
+`ifdef SHIELD_GIGE_SMA
+	output phy2_resetn,
+	output phy2_mdc,
+	inout phy2_mdio,
+`elsif SHIELD_SFP_SMA
+	input 	sfp_tx_fault,		// high indicates a laser fault of some kind.
+	output 	sfp_tx_disable,		// high disables the transmitter
+	input	sfp_pres_n,			// (mod-def 0): grounded by the module to indicate that the module is present)
+	inout	sfp_i2c_sda,		// (mod-def 2)
+	output	sfp_i2c_scl,		// (mod-def 1)
+	input 	sfp_los,			// Low indicates normal operation
+	output	sfp_rate_select,	// high for full bandwidth
+`endif
+	
+	// Microcontroller SPI and bit banging
+	input spi_cs,
+	input spi_clk,
+	output spi_miso,
+	input spi_mosi,
+	output fpga_int,
+	input  fpga_gpio,
+	
+	// I2C
+	inout i2c_scl,
+	inout i2c_sda,
+
+	// K02 UART
+	input uart_txd,
+	output uart_rxd,
+	
+`ifdef DARSENA_V02
+	output fpga_jtag_e,
+	// FTDI UART signals muxed with JTAG
+	input ftdi_tck_txd,
+	output ftdi_tdi_rxd,
+`endif
+
+    output [2:0] led,
+	
+	output ard_sda,
+	output ard_scl,
+	
+`ifdef SHIELD_SFP_SMA
+	output sfp_led1,	// TXD3
+	output sfp_led2,	// RXD3
+	output sfp_led3,	// TXD2
+	output sfp_led4,	// RXD2
+	output sfp_led5,	// TXD1
+	output sfp_led6,	// RXD1
+`endif
+	
+	input   pe0,		// 
+	output  pe1,		// 
+	output  pe3,
+	output  pe4,
+	output  pe5,
+	output  pg5,
+	input  ph3,			// UART RX for SFP Testing
+	output  ph4,		// UART TX for SFP Testing
+	inout [9:0] pa  
+);
+	
+`include "directives.v"
+`include "sgmii_params.v"
+`include "ethernet_params.v"
+
+`ifdef DARSENA_V01
+	wire fb_clk;
+	wire fb_ale;
+	wire fb_oen;
+	wire fb_rwn;
+	wire fb_csn;
+	wire fb_cregs_sel;
+	wire [9:0] fb_ad;
+`endif
+
+/* PARAMS */
+localparam MDIO_ROM_ADDR_SZ = 7;
+
+/* nets and variables */
+
+// clocks
+wire 	clk_slow, clk_1_25, clk_10, clk_20;
+wire 	clk_100;
+wire 	refclko;
+
+// pulses
+wire pulse_10ms, pulse_1_6ms;
+
+// misc resets
+wire [3:0] phy_resetn;	// bit[0] will get pruned out for now
+wire [3:0] mac_reset;
+
+// dcu resets
+wire [1:0] pcs_rst_dual;
+wire [1:0] serdes_rst_dual;
+wire [1:0] tx_serdes_rst;	
+
+// channel resets
+wire [3:0] rx_pcs_rst;
+wire [3:0] rx_serdes_rst;
+wire [3:0] tx_pcs_rst;
+
+// MDIO controller and driver
+wire mdio_cont_work_start, mdio_cont_work_run;
+wire mdio_cont_work_done;
+wire [MDIO_ROM_ADDR_SZ-1:0] mdio_routine_addr;
+wire [1:0] mdio_mux_sel;
+wire mdio_done, mdo_oe;
+wire mdo;
+reg mdi;
+wire [15:0] mdio_wd;
+wire [15:0] mdio_rd;
+wire [4:0] mdio_reg_addr;
+wire mdio_ld, mdio_run;
+wire mdio_rwn;
+wire bin_to_ascii_run;
+
+// MDIO Data block
+wire [MDIO_ROM_ADDR_SZ-1:0] rom_a;
+wire [7:0] rom_d;
+wire [4:0] mdio_reg_addr_set;
+wire [7:0] mdio_w_data_h_set, mdio_w_data_l_set;
+wire [4:0] mdio_page_set;
+
+// I2C
+wire sda_oe, scl_oe, sda_o, scl_o;
+wire i2c_fifo_priority;
+
+// UART
+wire uart_rx_done;
+wire read_fifo_we;
+wire [8:0] fifo_r_d;
+wire [6:0] d_uart_rx;
+
+// bin to ASCII
+wire [15:0] bin_to_ascii_d_in;
+wire [6:0] cont_rd;
+
+// PCS, mac
+wire pcs_pclk;
+wire [1:0] pll_lol;
+wire sgmii_rx_k[0:3], sgmii_tx_k[0:3];
+wire sgmii_tx_disp_correct[0:3];
+wire sgmii_rx_cv_err[0:3], sgmii_rx_disp_err[0:3], sgmii_rx_cdr_lol[0:3];
+wire sgmii_lsm_status[0:3], sgmii_rx_los_low[0:3];
+wire [7:0] rx_data0, rx_data1, rx_data2, rx_data3;
+wire [7:0] tx_data0, tx_data1, tx_data2, tx_data3;
+wire [6:0] read_fifo_d_i;
+wire [3:0] rx_sample;
+wire [3:0] pcs_error;
+
+// ipv4
+wire [3:0] ipv4_pkt_start;
+wire [3:0] ipv4_pkt_complete;
+
+reg cont_fifo_re_m1, cont_fifo_re_m2;
+wire cont_fifo_empty;
+wire i2c_fifo_re, uart_fifo_re;
+wire i2c_cont_we, i2c_cont_done;
+wire i_cont_fifo_re;	
+wire bin_to_ascii_we, mdio_rd_we, cont_rd_we;	
+wire [3:0] phy_up;
+
+// Interrupts
+wire [6:0] int_do;
+wire [3:0] mac_int;
+wire int_sel;
+
+// Common Internal Memory Bus
+wire[10:0] mem_addr;
+wire [8:0] mem_d_i;
+reg [8:0] mem_d_o;
+wire mem_we, mem_oe;
+wire [4:0] mem_do_mux_sel;
+
+// DPRAM
+wire [10:0] param_phy0_addr, param_phy1_addr, param_phy2_addr, param_phy3_addr;
+wire [8:0] param_phy0_din, param_phy1_din, param_phy2_din, param_phy3_din;
+wire [8:0] param_phy0_dout, param_phy1_dout, param_phy2_dout, param_phy3_dout;
+wire param_phy0_ce, param_phy1_ce, param_phy2_ce, param_phy3_ce;
+wire param_phy0_we, param_phy1_we, param_phy2_we, param_phy3_we;
+wire [8:0] param_ram_0_do, param_ram_1_do, param_ram_2_do, param_ram_3_do;
+
+wire [7:0] i2c_d_o;
+wire [8:0] micro_fifo_do;
+wire sys_mem_rx_ce, sys_mem_tx_ce, sys_mem_ptrs_sel;
+wire [3:0] param_sel;
+
+// drop_fifos and filter
+wire rx0_k_m1, rx0_k_m2, rx0_k_m3, rx0_k_m4;
+wire [7:0] rx0_data_m1, rx0_data_m2, rx0_data_m3, rx0_data_m4;
+
+wire rx1_k_m1, rx1_k_m2, rx1_k_m3, rx1_k_m4;
+wire [7:0] rx1_data_m1, rx1_data_m2, rx1_data_m3, rx1_data_m4;
+
+wire rx2_k_m1, rx2_k_m2, rx2_k_m3, rx2_k_m4;
+wire [7:0] rx2_data_m1, rx2_data_m2, rx2_data_m3, rx2_data_m4; 
+
+wire rx3_k_m1, rx3_k_m2, rx3_k_m3, rx3_k_m4;
+wire [7:0] rx3_data_m1, rx3_data_m2, rx3_data_m3, rx3_data_m4; 
+
+wire [3:0] rx_mac_keep;
+wire [3:0] rx_sc_wr_done;
+
+// drop filter outputs
+wire rx_df_fifo_we_01, rx_df_fifo_we_02, rx_df_fifo_we_03;
+wire rx_df_fifo_we_10, rx_df_fifo_we_12, rx_df_fifo_we_13;
+wire rx_df_fifo_we_20, rx_df_fifo_we_21, rx_df_fifo_we_23, rx_df_fifo_we_2u;
+wire rx_df_fifo_we_30, rx_df_fifo_we_31, rx_df_fifo_we_32;
+wire rx_df_fifo_we_u2;
+
+wire [8:0]  rx_df_fifo_d_01, rx_df_fifo_d_02, rx_df_fifo_d_03; 
+wire [8:0]  rx_df_fifo_d_10, rx_df_fifo_d_12, rx_df_fifo_d_13; 
+wire [8:0]  rx_df_fifo_d_20, rx_df_fifo_d_21, rx_df_fifo_d_23, rx_df_fifo_d_2u; 
+wire [8:0]  rx_df_fifo_d_30, rx_df_fifo_d_31, rx_df_fifo_d_32;
+wire [8:0]  rx_df_fifo_d_u2;
+
+// pkt filter
+wire [3:0] trigger;
+wire [3:0] rx_enet_bcast;
+wire [3:0] rx_ipv4_arp;
+wire rx_pf_keep_01;
+wire rx_pf_keep_02;
+wire rx_pf_keep_03;
+wire rx_pf_keep_10;
+wire rx_pf_keep_12;
+wire rx_pf_keep_13;
+wire rx_pf_keep_20;
+wire rx_pf_keep_21;
+wire rx_pf_keep_23;
+wire rx_pf_keep_2u;
+wire rx_pf_keep_30;
+wire rx_pf_keep_31;
+wire rx_pf_keep_32;
+wire rx_pf_keep_u2;
+
+// rx_fifos
+wire [3:0] rx_sc_fifo_we;
+wire rx_sw_fifo_re_01, rx_sw_fifo_re_02, rx_sw_fifo_re_03;
+wire rx_sf_fifo_empty_01, rx_sf_fifo_empty_02, rx_sf_fifo_empty_03;
+wire rx_sw_fifo_re_10, rx_sw_fifo_re_12, rx_sw_fifo_re_13;
+wire rx_sf_fifo_empty_10, rx_sf_fifo_empty_12, rx_sf_fifo_empty_13;
+wire rx_sw_fifo_re_20, rx_sw_fifo_re_21, rx_sw_fifo_re_23, rx_sw_fifo_re_2u;
+wire rx_sf_fifo_empty_20, rx_sf_fifo_empty_21, rx_sf_fifo_empty_23, rx_sf_fifo_empty_2u;
+wire rx_sw_fifo_re_30, rx_sw_fifo_re_31, rx_sw_fifo_re_32;
+wire rx_sf_fifo_empty_30, rx_sf_fifo_empty_31, rx_sf_fifo_empty_32;
+wire rx_sw_fifo_re_u2, rx_uc_fifo_empty_u2;
+wire [8:0] rx_sc_fifo_d0, rx_sc_fifo_d1, rx_sc_fifo_d2, rx_sc_fifo_d3;
+wire [8:0] rx_sf_fifo_d_01, rx_sf_fifo_d_02, rx_sf_fifo_d_03;
+wire [8:0] rx_sf_fifo_d_10, rx_sf_fifo_d_12, rx_sf_fifo_d_13;
+wire [8:0] rx_sf_fifo_d_20, rx_sf_fifo_d_21, rx_sf_fifo_d_23, rx_sf_fifo_d_2u;
+wire [8:0] rx_sf_fifo_d_30, rx_sf_fifo_d_31, rx_sf_fifo_d_32;
+wire [8:0] rx_uc_fifo_d_u2;
+wire rx_sf_almost_full_01, rx_sf_almost_full_02, rx_sf_almost_full_03;
+wire rx_sf_almost_full_10, rx_sf_almost_full_12, rx_sf_almost_full_13;
+wire rx_sf_almost_full_20, rx_sf_almost_full_21, rx_sf_almost_full_23;
+
+
+// between switch and mac
+wire [8:0] tx_sw_fifo_d0, tx_sw_fifo_d1, tx_sw_fifo_d2, tx_sw_fifo_d3, tx_sw_fifo_du;
+wire [3:0] tx_sc_fifo_re;
+wire tx_uc_fifo_re;
+wire [3:0] tx_sw_fifo_empty;
+wire tx_sw_fifo_we;
+
+wire [2:0] tx_sw_mode0, tx_sw_mode1, tx_sw_mode2, tx_sw_mode3;
+wire tx_sw_modeu;
+wire [3:0] tx_sc_done;
+
+// 100 Mbit
+wire[3:0] mode_100Mbit;
+
+// Flexbus
+wire fb_ad_oe;
+wire[9:0] fb_ad_o;
+reg[9:0] fb_d;
+
+wire pkt_filter_sel_01, pkt_filter_sel_02, pkt_filter_sel_03;
+wire pkt_filter_sel_10, pkt_filter_sel_12, pkt_filter_sel_13;
+wire pkt_filter_sel_20, pkt_filter_sel_21, pkt_filter_sel_23, pkt_filter_sel_2u;
+wire pkt_filter_sel_u2;
+
+// FCS
+wire [1:0] fcs_addr0, fcs_addr1, fcs_addr2, fcs_addr3;
+wire [7:0] fcs_din0, fcs_din1, fcs_din2, fcs_din3;
+wire [7:0] fcs_dout0, fcs_dout1, fcs_dout2, fcs_dout3;
+wire[3:0] fcs_init, fcs_enable;
+
+// half FIFO / DPRAM interface for uP
+wire hfifo_we, hfifo_re; 
+wire [8:0] hfifo_tx_d, hfifo_rx_d;
+wire hfifo_empty;
+wire micro_fifo_int;
+wire tx_uc_block;
+	
+// SCI
+wire[1:0] sci_sel_dual;
+wire[3:0] sci_sel_ch;
+wire[7:0] sci_rddata0, sci_rddata1 ;
+wire[1:0] sci_int;
+
+// Metrics
+wire tx_custom, metrics_start;
+wire [8:0] metrics_d;
+
+// Network Debug & Metrics
+reg [3:0] rx_active, tx_active;
+wire [3:0] mac_rx_active;
+wire [3:0] drop_rx0_active, drop_rx1_active, drop_rx2_active, drop_rx3_active;
+wire [3:0] sync_rx0_active, sync_rx1_active, sync_rx2_active, sync_rx3_active;
+wire [3:0] mac_tx_active;
+wire [3:0] rx_sc_error;
+wire [3:0] rx_eop, rx_sop;
+wire [3:0] tx_eop, tx_sop;
+wire [10:0] rx0_byte_cnt, rx1_byte_cnt, rx2_byte_cnt, rx3_byte_cnt;
+wire [10:0] tx0_byte_cnt, tx1_byte_cnt, tx2_byte_cnt, tx3_byte_cnt;
+
+// Debug LEDs
+reg lsm_status, rx_cdr_lol, rx_los_low;
+
+// Misc Debug
+wire ext_sci_int;
+
+/****************************
+ * 
+ *   Logic Begins Below 
+ *   
+ ***************************/
+
+/* Lattice requires GSR to be in top-level module and be named GSR_INST */
+GSR GSR_INST(.GSR(rstn));
+PUR PUR_INST(.PUR(1'b1));
+
+assign phy_mdc = clk_10;
+
+assign phy0_resetn = phy_resetn[0];
+assign phy1_resetn = phy_resetn[1];
+
+`ifdef SHIELD_GIGE_SMA
+	assign phy2_resetn = phy_resetn[2];
+	assign phy2_mdc = clk_10;
+`elsif SHIELD_SFP_SMA
+	assign sfp_tx_disable = 1'b0;
+	assign sfp_i2c_scl = 1'b1;
+	assign sfp_rate_select = 1'b1;
+`endif
+
+	
+/* 
+ * Clocks derived from the internal OSCG
+ */
+clk_gen clk_gen_0(
+	.rstn( rstn ),
+	.clk_10( clk_10 ),
+	.clk_5( ),
+	.clk_2_5( ),	
+	.clk_1_25( clk_1_25 ),
+	.clk_slow( clk_slow )
+);
+
+
+/* 
+*   main controller
+*   
+*   controls worker blocks
+*   interfaces with uC via I2C / UART
+*
+*/      
+controller #(.ADDR_SZ( MDIO_ROM_ADDR_SZ ))controller_0
+(
+	.rstn( rstn ),
+	.clk( clk_10 ),
+	.init(1'b1),
+	.pulse_100ms( 1'b0 ),
+	// PCS status lines
+	.pcs_rx_error( pcs_error ),
+	.pll_lol( pll_lol ),
+	// link status
+	.port_up( phy_up ),
+//	.sfp_los(sfp_los),
+	// mdio_controller interface
+	.mdio_cont_start(mdio_cont_work_start),
+	.mdio_cont_done(mdio_cont_work_done),
+	.mdio_routine_addr( mdio_routine_addr ),
+	.mdio_run( mdio_run ),
+	// mdio_data params
+	.mdio_page( mdio_page_set ),
+	.mdio_reg_addr( mdio_reg_addr_set ),
+	.mdio_w_data_h( mdio_w_data_h_set ),
+	.mdio_w_data_l( mdio_w_data_l_set ),
+	// bin_to_ascii interface
+	.bin_to_ascii_run( bin_to_ascii_run ),
+	// ext_sys_fifo interface: controller to external I/F FIFO
+	.fifo_mux_sel( read_fifo_mux_sel ),
+	.fifo_we( cont_rd_we ),
+	.read_fifo_d_o( cont_rd ),
+	// i2c interface
+	.i2c_rx_we ( i2c_cont_we ),
+	.i2c_rx_done ( i2c_cont_done ),
+	.i2c_d_in( i2c_d_o ),
+	// reset and config
+	.pcs_rst_dual( pcs_rst_dual ),
+	.serdes_rst_dual( serdes_rst_dual ),
+	.tx_serdes_rst( tx_serdes_rst ),
+	.phy_resetn( phy_resetn ),
+	.mac_reset( mac_reset ),
+	.tx_pcs_rst( tx_pcs_rst ),
+	.rx_serdes_rst( rx_serdes_rst ),
+	.rx_pcs_rst( rx_pcs_rst ),
+	.mdio_mux_sel( mdio_mux_sel ),
+	.i2c_fifo_priority( i2c_fifo_priority ),
+	// TX custom packet
+	.tx_metrics( tx_custom )
+
+);
+
+/*
+ * Controls the routing of data and transmit modes
+ */
+switch switch_0(
+	.rstn( rstn ),
+	.clk( pcs_pclk ),
+	// PHY status
+	.phy_up( phy_up ),
+	.mode_100Mbit ( mode_100Mbit ),
+	// FIFO input data from RX FIFOs
+	.rx_d_01( rx_sf_fifo_d_01 ),
+	.rx_d_02( rx_sf_fifo_d_02 ),
+	.rx_d_03( rx_sf_fifo_d_03 ),
+	.rx_d_10( rx_sf_fifo_d_10 ),
+	.rx_d_12( rx_sf_fifo_d_12 ),
+	.rx_d_13( rx_sf_fifo_d_13 ),
+	.rx_d_20( rx_sf_fifo_d_20 ),
+	.rx_d_21( rx_sf_fifo_d_21 ),
+	.rx_d_23( rx_sf_fifo_d_23 ),
+	.rx_d_2u( rx_sf_fifo_d_2u ),
+	.rx_d_30( rx_sf_fifo_d_30 ),
+	.rx_d_31( rx_sf_fifo_d_31 ),
+	.rx_d_32( rx_sf_fifo_d_32 ),
+	.rx_d_u2( rx_uc_fifo_d_u2 ),
+	// RX FIFO read enables
+	.rx_fifo_re_01( rx_sw_fifo_re_01 ),
+	.rx_fifo_re_02( rx_sw_fifo_re_02 ),
+	.rx_fifo_re_03( rx_sw_fifo_re_03 ),
+	.rx_fifo_re_10( rx_sw_fifo_re_10 ),
+	.rx_fifo_re_12( rx_sw_fifo_re_12 ),
+	.rx_fifo_re_13( rx_sw_fifo_re_13 ),
+	.rx_fifo_re_20( rx_sw_fifo_re_20 ),
+	.rx_fifo_re_21( rx_sw_fifo_re_21 ),
+	.rx_fifo_re_23( rx_sw_fifo_re_23 ),
+	.rx_fifo_re_2u( rx_sw_fifo_re_2u ),
+	.rx_fifo_re_30( rx_sw_fifo_re_30 ),
+	.rx_fifo_re_31( rx_sw_fifo_re_31 ),
+	.rx_fifo_re_32( rx_sw_fifo_re_32 ),
+	.rx_fifo_re_u2( rx_sw_fifo_re_u2 ),
+	// RX FIFO Empty flags
+	.rx_fifo_empty_01( rx_sf_fifo_empty_01 ),
+	.rx_fifo_empty_02( rx_sf_fifo_empty_02 ),
+	.rx_fifo_empty_03( rx_sf_fifo_empty_03 ),
+	.rx_fifo_empty_10( rx_sf_fifo_empty_10 ),
+	.rx_fifo_empty_12( rx_sf_fifo_empty_12 ),
+	.rx_fifo_empty_13( rx_sf_fifo_empty_13 ),
+	.rx_fifo_empty_20( rx_sf_fifo_empty_20 ),
+	.rx_fifo_empty_21( rx_sf_fifo_empty_21 ),
+	.rx_fifo_empty_23( rx_sf_fifo_empty_23 ),
+	.rx_fifo_empty_2u( rx_sf_fifo_empty_2u ),
+	.rx_fifo_empty_30( rx_sf_fifo_empty_30 ),
+	.rx_fifo_empty_31( rx_sf_fifo_empty_31 ),
+	.rx_fifo_empty_32( rx_sf_fifo_empty_32 ),
+	.rx_fifo_empty_u2( rx_uc_fifo_empty_u2 ),
+	// RX Byte Count
+	.rx_wr_done(rx_sc_wr_done),
+	.rx0_byte_cnt(rx0_byte_cnt),
+	.rx1_byte_cnt(rx1_byte_cnt),
+	.rx2_byte_cnt(rx2_byte_cnt),
+	.rx3_byte_cnt(rx3_byte_cnt),
+	// TX FIFO output from internal muxes
+	.tx_d0( tx_sw_fifo_d0),
+	.tx_d1( tx_sw_fifo_d1 ),
+	.tx_d2( tx_sw_fifo_d2 ),
+	.tx_d3( tx_sw_fifo_d3 ),
+	.tx_du( tx_sw_fifo_du ),
+	// TX FIFO read enable inputs (need to route to RX output FIFOs)
+	.tx_fifo_re( tx_sc_fifo_re ),
+	.tx_fifo_we_u ( tx_sw_fifo_we ),
+	// TX FIFO Empty Flags (need to route to RX output FIFOs)
+	.tx_fifo_empty( tx_sw_fifo_empty ),
+	// TX modes for the PHYs and uc
+	.tx_mode0( tx_sw_mode0 ),
+	.tx_mode1( tx_sw_mode1 ),
+	.tx_mode2( tx_sw_mode2 ),
+	.tx_mode3( tx_sw_mode3 ),
+	.tx_modeu( tx_modeu ),
+	// TX byte cnt
+	.tx0_byte_cnt(tx0_byte_cnt),
+	.tx1_byte_cnt(tx1_byte_cnt),
+	.tx2_byte_cnt(tx2_byte_cnt),
+	.tx3_byte_cnt(tx3_byte_cnt),
+	// TX state machine done flag
+	.tx_f( tx_sc_done ),
+	// TX custom packet
+	.tx_custom	( tx_custom )
+);
+
+
+/*
+ * RX and TX controller logic tied to PCS/SGMII protocol
+ */
+mac mac_0(
+	.rstn( ~mac_reset[0] ),
+	.phy_resetn ( phy_resetn[0] ),
+	.clk( pcs_pclk ),	
+	.tap_port ( 1'b0 ),
+	//  AN
+	.phy_type(2'b00),		// SGMII=0
+	.an_disable( 1'b0 ),
+	.pulse_1_6ms(pulse_1_6ms),
+	.pulse_10ms(pulse_10ms),
+	.fixed_speed(SGMII_SPEED_AN),
+	.an_duplex(  ),
+	.mode_100Mbit( mode_100Mbit[0] ),
+	.phy_up( phy_up[0] ),
+	// Switch I/F
+	.tx_mode( tx_sw_mode0 ),
+	.tx_f( tx_sc_done[0] ),
+	// PCS / SERDES health
+	.rx_lsm( sgmii_lsm_status[0] ),
+	.rx_cv_err ( sgmii_rx_cv_err[0] ),
+	.rx_disp_err( sgmii_rx_disp_err[0] ),
+	.rx_cdr_lol( sgmii_rx_cdr_lol[0] ),
+	.rx_los ( sgmii_rx_los_low[0] ),
+	// PCS data I/F
+	.rx_k( sgmii_rx_k[0] ),
+	.rx_data( rx_data0 ),
+	.tx_k( sgmii_tx_k[0] ),
+	.tx_data( tx_data0 ),
+	.tx_disp_correct( sgmii_tx_disp_correct[0] ),
+	// Flags and Interrupts 
+	.keep( rx_mac_keep[0] ),
+	// TX FCS
+	.fcs_init( fcs_init[0] ),
+	.fcs_enable( fcs_enable[0] ),
+	.fcs_addr( fcs_addr0 ),
+	.fcs_dout( fcs_din0 ),
+	.fcs_din( fcs_dout0 ),
+	// SGMII RX / FIFO Write
+	.rx_fifo_we( rx_sc_fifo_we[0] ),
+	.rx_fifo_d( rx_sc_fifo_d0 ),
+	.rx_error( rx_sc_error[0] ),
+	.rx_wr_done( rx_sc_wr_done[0] ),
+	.rx_byte_cnt(rx0_byte_cnt),
+	// SGMII TX / FIFO Read
+	.tx_byte_cnt_i(tx0_byte_cnt),
+	.tx_fifo_re( tx_sc_fifo_re[0] ),
+	.tx_fifo_d( tx_sw_fifo_d0 ),
+	.tx_fifo_empty( tx_sw_fifo_empty[0] ),
+	// Packet Filter
+	.rx_sample( rx_sample[0] ),
+	.ipv4_pkt_start( ipv4_pkt_start[0] ),
+	.trigger( ),
+	.rx_enet_bcast( rx_enet_bcast[0] ),
+	.rx_ipv4_arp( rx_ipv4_arp[0] ),	
+	.rx_k_m1( rx0_k_m1 ), 
+	.rx_k_m2( rx0_k_m2 ), 
+	.rx_k_m3( rx0_k_m3), 
+	.rx_k_m4( rx0_k_m4 ),
+	.rx_data_m1( rx0_data_m1 ), 
+	.rx_data_m2( rx0_data_m2 ), 
+	.rx_data_m3( rx0_data_m3), 
+	.rx_data_m4( rx0_data_m4 ),
+	// Param RAM
+	.dpr_ad( param_phy0_addr ),
+	.dpr_we( param_phy0_we ),
+	.dpr_ce( param_phy0_ce ),
+	.dpr_di( param_phy0_din ),
+	.dpr_do( param_phy0_dout ),
+	// Metrics and Interrupts
+	.mac_int( mac_int[0] ),
+	.rx_sop( rx_sop[0] ),
+	.rx_eop( rx_eop[0] ),
+	.tx_sop( tx_sop[0] ),
+	.tx_eop( tx_eop[0] ),
+	.metrics_start ( ),
+	.metrics_d ( 9'h0 ),
+	.rx_active( mac_rx_active[0] ),
+	.tx_active( mac_tx_active[0] )
+);
+
+
+ipv4_rx ipv4_rx_0(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),	
+		// control
+		.phy_resetn ( phy_resetn[0] ),
+		.phy_up( phy_up[0] ),
+		// packet data
+		.pkt_start( ipv4_pkt_start[0] ),
+		.rx_eop( rx_eop[0] ),
+		.rx_data_m1( rx0_data_m1 ), 
+		.rx_data_m2( rx0_data_m2 ), 
+		.rx_data_m3( rx0_data_m3), 
+		.rx_data_m4( rx0_data_m4 ),	
+		// flags
+		.pkt_complete(ipv4_pkt_complete[0]),
+		.trigger_src_addr(  ),
+		.trigger_dst_addr( trigger[0] ),
+		.keep(  )
+		);
+
+
+pkt_filter pkt_filter_01(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),
+		// input for programming
+		.sel( pkt_filter_sel_01 ),
+		.we( mem_we ),
+		.addr( mem_addr[3:0] ),
+		.d_in( mem_d_i[7:0] ),
+		// registered data
+		.rx_data_m1( rx0_data_m1 ), 
+		.rx_data_m2( rx0_data_m2 ), 
+		.rx_data_m3( rx0_data_m3), 
+		.rx_data_m4( rx0_data_m4 ),	
+		// filter
+		.new_frame ( rx_sop[0] ),
+		.block( 1'b0 ),
+		.invert( 1'b1 ),
+		.trigger( trigger[0] ),
+		.keep( rx_pf_keep_01 )
+);
+
+drop_fifo drop_fifo_01(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		.enable( 1'b1 ),
+		// control
+		.keep ( rx_pf_keep_01 | rx_mac_keep[0] ),
+		.passthrough( 1'b0 ),
+		// input
+		.we_in( rx_sc_fifo_we[0] ),
+		.wr_done( rx_sc_wr_done[0] ),
+		.d_in( rx_sc_fifo_d0 ),
+		// output
+		.we_out( rx_df_fifo_we_01 ),
+		.d_out( rx_df_fifo_d_01 ),
+		// debug
+		.active( drop_rx0_active[1] )
+);
+	
+sync_fifo sync_fifo_rx_01(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		// input
+		.we ( rx_df_fifo_we_01 & phy_up[1] ),
+		.d_in ( rx_df_fifo_d_01 ),
+		// output
+		.re ( rx_sw_fifo_re_01 ),
+		.d_out( rx_sf_fifo_d_01 ),
+		.empty( rx_sf_fifo_empty_01 ),
+		.almost_full(  ),
+		.reset_ptrs( 1'b0 ),
+		// debug
+		.active( sync_rx0_active[1] )
+);
+	
+pkt_filter pkt_filter_02(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),
+		// input for programming
+		.sel( pkt_filter_sel_02 ),
+		.we( mem_we ),
+		.addr( mem_addr[3:0] ),
+		.d_in( mem_d_i[7:0] ),
+		// registered data
+		.rx_data_m1( rx0_data_m1 ), 
+		.rx_data_m2( rx0_data_m2 ), 
+		.rx_data_m3( rx0_data_m3), 
+		.rx_data_m4( rx0_data_m4 ),	
+		// filter
+		.new_frame ( rx_sop[0] ),
+		.block( rx_sf_almost_full_02 ),
+		.invert(1'b1),
+		.trigger(trigger[0]),
+		.keep( rx_pf_keep_02 )
+);
+
+drop_fifo drop_fifo_02(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		.enable( 1'b1 ),
+		// control
+		.keep ( rx_pf_keep_02 | rx_mac_keep[0] ),
+		.passthrough( 1'b0 ),
+		// input
+		.we_in( rx_sc_fifo_we[0] ),
+		.wr_done( rx_sc_wr_done[0] ),
+		.d_in( rx_sc_fifo_d0 ),
+		// output
+		.we_out( rx_df_fifo_we_02 ),
+		.d_out( rx_df_fifo_d_02 ),
+		.active( drop_rx0_active[2] )
+	);
+
+sync_fifo sync_fifo_rx_02(
+	.rstn( rstn ),
+	.clk ( pcs_pclk ),
+	// input
+	.we ( rx_df_fifo_we_02 & phy_up[2] ),
+	.d_in ( rx_df_fifo_d_02 ),
+	// output
+	.re ( rx_sw_fifo_re_02 ),
+	.d_out( rx_sf_fifo_d_02 ),
+	.empty( rx_sf_fifo_empty_02 ),
+	.almost_full( rx_sf_almost_full_02 ),
+	.reset_ptrs( 1'b0 ),
+	// debug
+	.active(sync_rx0_active[2]  )
+);
+
+
+pkt_filter pkt_filter_03(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),
+		// input for programming
+		.sel( pkt_filter_sel_03 ),
+		.we( mem_we ),
+		.addr( mem_addr[3:0] ),
+		.d_in( mem_d_i[7:0] ),
+		// registered data
+		.rx_data_m1( rx0_data_m1 ), 
+		.rx_data_m2( rx0_data_m2 ), 
+		.rx_data_m3( rx0_data_m3), 
+		.rx_data_m4( rx0_data_m4 ),	
+		// filter
+		.new_frame ( rx_sop[0] ),
+		.block( rx_sf_almost_full_03 ),
+		.invert( 1'b0 ),
+		.trigger( trigger[0] ),
+		.keep( rx_pf_keep_03 )
+	);
+
+drop_fifo drop_fifo_03(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		.enable( 1'b0 ),
+		// control
+		.keep ( rx_pf_keep_03 | rx_mac_keep[0] ),
+		.passthrough( 1'b0 ),
+		// input
+		.we_in( rx_sc_fifo_we[0] ),
+		.wr_done( rx_sc_wr_done[0] ),
+		.d_in( rx_sc_fifo_d0 ),
+		// output
+		.we_out( rx_df_fifo_we_03 ),
+		.d_out( rx_df_fifo_d_03 ),
+		.active( drop_rx0_active[3] )
+	);
+
+sync_fifo sync_fifo_rx_03(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		// input
+		.we ( rx_df_fifo_we_03 & phy_up[3] ),
+		.d_in ( rx_df_fifo_d_03 ),
+		// output
+		.re ( rx_sw_fifo_re_03 ),
+		.d_out( rx_sf_fifo_d_03 ),
+		.empty( rx_sf_fifo_empty_03 ),
+		.almost_full( rx_sf_almost_full_03 ),
+		.reset_ptrs( 1'b0 ),
+		// debug
+		.active( sync_rx0_active[3] )
+	);
+
+fcs fcs_0(
+	.rstn( rstn ),
+	.clk( pcs_pclk ),
+	.init( fcs_init[0] ),
+	.enable( fcs_enable[0] ), 
+	.addr( fcs_addr0 ),
+	.din( fcs_din0 ),
+	.dout( fcs_dout0 )
+);
+
+/*
+ * Param RAM
+ */
+dpram param_ram_0(
+		.rstn(rstn),
+		.a_clk(clk_10),
+		.a_clk_e(param_sel[0]),
+		.a_we(mem_we),
+		.a_oe(mem_oe),
+		.a_addr(mem_addr),
+		.a_din(mem_d_i[8:0]),
+		.a_dout(param_ram_0_do),
+		// port B
+		.b_clk( pcs_pclk),
+		.b_clk_e(param_phy0_ce),
+		.b_we(param_phy0_we),
+		.b_oe( 1'b1  ),
+		.b_addr( param_phy0_addr ),
+		.b_din( param_phy0_dout ),
+		.b_dout( param_phy0_din )
+	);
+
+mac mac_1(
+	.rstn( ~mac_reset[1] ),
+	.phy_resetn ( phy_resetn[1] ),
+	.clk( pcs_pclk ),
+	.tap_port ( 1'b0 ),
+	// AN
+	.phy_type(2'b00),		// SGMII==0
+	.an_disable( 1'b0 ),
+	.pulse_1_6ms(pulse_1_6ms),
+	.pulse_10ms(pulse_10ms),
+	.fixed_speed(SGMII_SPEED_AN),
+	.an_duplex(  ),
+	.mode_100Mbit( mode_100Mbit[1] ),
+	.phy_up( phy_up[1] ),
+	// Switch I/F
+	.tx_mode( tx_sw_mode1 ),
+	.tx_f( tx_sc_done[1] ),
+	// PCS / SERDES health
+	.rx_lsm( sgmii_lsm_status[1] ),
+	.rx_cv_err ( sgmii_rx_cv_err[1] ),
+	.rx_disp_err( sgmii_rx_disp_err[1] ),
+	.rx_cdr_lol( sgmii_rx_cdr_lol[1] ),
+	.rx_los ( sgmii_rx_los_low[1] ),
+	// PCS data I/F
+	.rx_k( sgmii_rx_k[1] ),
+	.rx_data( rx_data1 ),
+	.tx_k( sgmii_tx_k[1] ),
+	.tx_data( tx_data1 ),
+	.tx_disp_correct( sgmii_tx_disp_correct[1] ),
+	// Flags and Interrupts
+	.keep( rx_mac_keep[1] ),
+	// FCS
+	.fcs_init( fcs_init[1] ),
+	.fcs_enable( fcs_enable[1] ),
+	.fcs_addr( fcs_addr1 ),
+	.fcs_dout( fcs_din1 ),
+	.fcs_din( fcs_dout1 ),
+	// SGMII RX / FIFO Write
+	.rx_fifo_we(  rx_sc_fifo_we[1]  ),
+	.rx_fifo_d( rx_sc_fifo_d1 ),
+	.rx_error( rx_sc_error[1] ),
+	.rx_wr_done( rx_sc_wr_done[1] ),
+	.rx_byte_cnt(rx1_byte_cnt),
+	// SGMII TX / FIFO Read
+	.tx_byte_cnt_i(tx1_byte_cnt),
+	.tx_fifo_re( tx_sc_fifo_re[1] ),
+	.tx_fifo_d( tx_sw_fifo_d1 ),
+	.tx_fifo_empty( tx_sw_fifo_empty[1] ),
+	// Packet Filter
+	.rx_sample( ),
+	.ipv4_pkt_start( ipv4_pkt_start[1] ),
+	.trigger( ),
+	.rx_enet_bcast( rx_enet_bcast[1] ),
+	.rx_ipv4_arp( rx_ipv4_arp[1] ),	
+	.rx_k_m1( rx1_k_m1 ), 
+	.rx_k_m2( rx1_k_m2 ), 
+	.rx_k_m3( rx1_k_m3), 
+	.rx_k_m4( rx1_k_m4 ),
+	.rx_data_m1( rx1_data_m1 ), 
+	.rx_data_m2( rx1_data_m2 ), 
+	.rx_data_m3( rx1_data_m3), 
+	.rx_data_m4( rx1_data_m4 ),
+	// Param RAM
+	.dpr_ad( param_phy1_addr ),
+	.dpr_we( param_phy1_we),
+	.dpr_ce(param_phy1_ce ),
+	.dpr_di(param_phy1_din),
+	.dpr_do(param_phy1_dout),
+	// Metrics  and Interrupts
+	.mac_int( mac_int[1] ),
+	.rx_sop( rx_sop[1] ),
+	.rx_eop( rx_eop[1] ),
+	.tx_sop( tx_sop[1] ),
+	.tx_eop( tx_eop[1] ),
+	.metrics_start ( ),
+	.metrics_d ( 9'h0 ),
+	.rx_active( mac_rx_active[1] ),
+	.tx_active( mac_tx_active[1] )
+);
+
+ipv4_rx ipv4_rx_1(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),	
+		// control
+		.phy_resetn ( phy_resetn[1] ),
+		.phy_up( phy_up[1] ),
+		// packet data
+		.pkt_start( ipv4_pkt_start[1] ),
+		.rx_eop( rx_eop[1] ),
+		.rx_data_m1( rx1_data_m1 ), 
+		.rx_data_m2( rx1_data_m2 ), 
+		.rx_data_m3( rx1_data_m3), 
+		.rx_data_m4( rx1_data_m4 ),	
+		// flags
+		.pkt_complete(ipv4_pkt_complete[1]),
+		.trigger_src_addr(  ),
+		.trigger_dst_addr( trigger[1] ),
+		.keep(  )
+	);
+
+pkt_filter #(.DEPTH(8), .DEPTHW(3), .WIDTH(32)) pkt_filter_10(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),
+		// input for programming
+		.sel( pkt_filter_sel_10 ),
+		.we( mem_we ),
+		.addr( mem_addr[4:0] ),
+		.d_in( mem_d_i[7:0] ),
+		// registered data
+		.rx_data_m1( rx1_data_m1 ), 
+		.rx_data_m2( rx1_data_m2 ), 
+		.rx_data_m3( rx1_data_m3), 
+		.rx_data_m4( rx1_data_m4 ),	
+		// filter
+		.new_frame ( rx_sop[1] ),
+		.block( 1'b0 ),
+		.invert( 1'b1 ),
+		.trigger( trigger[1] ),
+		.keep( rx_pf_keep_10 )
+	);
+
+drop_fifo drop_fifo_10(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		.enable( 1'b1 ),
+		// control
+		.keep ( rx_pf_keep_10 | rx_mac_keep[1] ),
+		.passthrough( 1'b0 ),
+		// input
+		.we_in( rx_sc_fifo_we[1] ),
+		.wr_done( rx_sc_wr_done[1] ),
+		.d_in( rx_sc_fifo_d1 ),
+		// output
+		.we_out( rx_df_fifo_we_10 ),
+		.d_out( rx_df_fifo_d_10 ),
+		// debug
+		.active( drop_rx1_active[0] )
+	);
+	
+sync_fifo sync_fifo_rx_10(
+	.rstn( rstn ),
+	.clk ( pcs_pclk ),
+	// input / RX
+	.we ( rx_df_fifo_we_10 & phy_up[0] ),
+	.d_in ( rx_df_fifo_d_10 ),
+	// output / TX
+	.re ( rx_sw_fifo_re_10 ),
+	.d_out( rx_sf_fifo_d_10 ),
+	.empty( rx_sf_fifo_empty_10 ),
+	.almost_full(  ),
+	.reset_ptrs( 1'b0 ),
+	// debug
+	.active( sync_rx1_active[0] )
+);
+
+pkt_filter pkt_filter_12(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),
+		// input for programming
+		.sel( pkt_filter_sel_12 ),
+		.we( mem_we ),
+		.addr( mem_addr[3:0] ),
+		.d_in( mem_d_i[7:0] ),
+		// registered data
+		.rx_data_m1( rx1_data_m1 ), 
+		.rx_data_m2( rx1_data_m2 ), 
+		.rx_data_m3( rx1_data_m3), 
+		.rx_data_m4( rx1_data_m4 ),	
+		// filter
+		.new_frame ( rx_sop[1] ),
+		.block( rx_sf_almost_full_12 ),
+		.invert( 1'b1 ),
+		.trigger( trigger[1] ),
+		.keep( rx_pf_keep_12 )
+	);
+	
+drop_fifo drop_fifo_12(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		.enable(1'b1),
+		// control
+		.keep ( rx_pf_keep_12 | rx_mac_keep[1] ),
+		.passthrough( 1'b0 ),
+		// input
+		.we_in( rx_sc_fifo_we[1] ),
+		.wr_done( rx_sc_wr_done[1] ),
+		.d_in( rx_sc_fifo_d1 ),
+		// output
+		.we_out( rx_df_fifo_we_12 ),
+		.d_out( rx_df_fifo_d_12 ),
+		// debug
+		.active( drop_rx1_active[2] )
+	);
+
+sync_fifo sync_fifo_rx_12(
+	.rstn( rstn ),
+	.clk ( pcs_pclk ),
+	// input / RX
+	.we ( rx_df_fifo_we_12 & phy_up[2] ),
+	.d_in ( rx_df_fifo_d_12 ),
+	// output / TX
+	.re ( rx_sw_fifo_re_12 ),
+	.d_out( rx_sf_fifo_d_12 ),
+	.empty( rx_sf_fifo_empty_12 ),
+	.almost_full( rx_sf_almost_full_12 ),
+	.reset_ptrs( 1'b0 ),
+	// debug
+	.active( sync_rx1_active[2] )
+);
+
+pkt_filter pkt_filter_13(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),
+		// input for programming
+		.sel( pkt_filter_sel_13 ),
+		.we( mem_we ),
+		.addr( mem_addr[3:0] ),
+		.d_in( mem_d_i[7:0] ),
+		// registered data
+		.rx_data_m1( rx1_data_m1 ), 
+		.rx_data_m2( rx1_data_m2 ), 
+		.rx_data_m3( rx1_data_m3), 
+		.rx_data_m4( rx1_data_m4 ),	
+		// filter
+		.new_frame ( rx_sop[1] ),
+		.block( 1'b0 ),
+		.invert( 1'b0 ),
+		.trigger( trigger[1] ),
+		.keep( rx_pf_keep_13 )
+	);
+
+drop_fifo drop_fifo_13(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		.enable( 1'b0 ),
+		// control
+		.keep ( rx_pf_keep_13 | rx_mac_keep[1] ),
+		.passthrough( 1'b0 ),
+		// input
+		.we_in( rx_sc_fifo_we[1] ),
+		.wr_done( rx_sc_wr_done[1] ),
+		.d_in( rx_sc_fifo_d1 ),
+		// output
+		.we_out( rx_df_fifo_we_13 ),
+		.d_out( rx_df_fifo_d_13 ),
+		// debug
+		.active( drop_rx1_active[3] )
+	);
+	
+sync_fifo sync_fifo_rx_13(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		// input / RX
+		.we ( rx_df_fifo_we_13 & phy_up[3] ),
+		.d_in ( rx_df_fifo_d_13 ),
+		// output / TX
+		.re ( rx_sw_fifo_re_13 ),
+		.d_out( rx_sf_fifo_d_13 ),
+		.empty( rx_sf_fifo_empty_13 ),
+		.almost_full(  ),
+		.reset_ptrs( 1'b0 ),
+		// debug
+		.active( sync_rx1_active[3] )
+	);
+
+fcs fcs_1(
+	.rstn( rstn ),
+	.clk( pcs_pclk ),
+	.init( fcs_init[1] ),
+	.enable( fcs_enable[1] ), 
+	.addr( fcs_addr1 ),
+	.din( fcs_din1 ),
+	.dout( fcs_dout1 )
+);
+
+/*
+ * Param RAM
+ */
+dpram param_ram_1(
+		.rstn(rstn),
+		.a_clk(clk_10),
+		.a_clk_e(param_sel[0]),
+		.a_we(mem_we),
+		.a_oe(mem_oe),
+		.a_addr(mem_addr),
+		.a_din(mem_d_i[8:0]),
+		.a_dout(param_ram_1_do),
+		// port B
+		.b_clk( pcs_pclk),
+		.b_clk_e(param_phy1_ce),
+		.b_we(param_phy1_we),
+		.b_oe( 1'b1  ),
+		.b_addr( param_phy1_addr ),
+		.b_din( param_phy1_dout ),
+		.b_dout( param_phy1_din )
+	);
+
+
+metrics metrics_2(
+	.rstn( rstn ),
+	.clk( pcs_pclk ),
+	.mode_100Mbit( mode_100Mbit[2] ),
+	// input data for gathering metrics
+	.rx_mac_keep( rx_mac_keep ),
+	.rx_pf_keep_01( rx_pf_keep_01 ),
+	.rx_pf_keep_02( rx_pf_keep_02 ),
+	.rx_pf_keep_10( rx_pf_keep_10 ),
+	.rx_pf_keep_12( rx_pf_keep_12 ),
+	.rx_pf_keep_20( rx_pf_keep_20 ),
+	.rx_pf_keep_21( rx_pf_keep_21 ),
+	.rx_pf_keep_23( rx_pf_keep_23 ),
+	
+	.rx_sop( rx_sop ),
+	.rx_eop( rx_eop ),
+	.tx_sop( tx_sop ),
+	.tx_eop( tx_eop ),
+	// metric outputs
+	.metrics_start ( metrics_start ),
+	.metrics_d( metrics_d )
+);
+
+
+// GEODSS MAC
+mac mac_2(
+	.rstn(~mac_reset[2]),
+	.phy_resetn ( phy_resetn[2] ),
+	.clk( pcs_pclk ),
+	.tap_port ( 1'b0 ),
+	// SGMII AN
+	.phy_type(2'b01),		// SX==1
+	.an_disable( 1'b1 ),
+	.pulse_1_6ms(pulse_1_6ms),
+	.pulse_10ms(pulse_10ms),
+	.fixed_speed(SGMII_SPEED_1GBIT),
+	.an_duplex(  ),
+	.mode_100Mbit( mode_100Mbit[2] ),
+	.phy_up( phy_up[2] ),
+	// Switch I/F	
+	.tx_mode( tx_sw_mode2 ),
+	.tx_f( tx_sc_done[2] ),
+	// PCS / SERDES health
+	.rx_lsm( 1'b1 ),	// TODO: Fix LSM for SFP
+	.rx_cv_err ( sgmii_rx_cv_err[2] ),
+	.rx_disp_err( sgmii_rx_disp_err[2] ),
+	.rx_cdr_lol( sgmii_rx_cdr_lol[2] ),
+	.rx_los ( sgmii_rx_los_low[2] ),
+	// PCS data I/F
+	.rx_k( sgmii_rx_k[2] ),
+	.rx_data( rx_data2 ),
+	.tx_k( sgmii_tx_k[2] ),
+	.tx_data( tx_data2 ),
+	.tx_disp_correct( sgmii_tx_disp_correct[2] ),
+	// Flags and Interrupts
+	.keep( rx_mac_keep[2] ),
+	// FCS
+	.fcs_init( fcs_init[2] ),
+	.fcs_enable( fcs_enable[2] ),
+	.fcs_addr( fcs_addr2 ),
+	.fcs_dout( fcs_din2 ),
+	.fcs_din( fcs_dout2 ),
+	// SGMII RX / FIFO Write
+	.rx_fifo_we( rx_sc_fifo_we[2] ),
+	.rx_fifo_d(rx_sc_fifo_d2),
+	.rx_error( rx_sc_error[2] ),
+	.rx_wr_done( rx_sc_wr_done[2] ),
+	.rx_byte_cnt(rx2_byte_cnt),
+	// SGMII TX / FIFO Read
+	.tx_byte_cnt_i(tx2_byte_cnt),
+	.tx_fifo_re( tx_sc_fifo_re[2] ),
+	.tx_fifo_d( tx_sw_fifo_d2 ),
+	.tx_fifo_empty( tx_sw_fifo_empty[2]),
+	// Packet Filter
+ 	.rx_sample( ),
+	.ipv4_pkt_start( ipv4_pkt_start[2] ),
+	.trigger( ),
+	.rx_enet_bcast( rx_enet_bcast[2] ),
+	.rx_ipv4_arp( rx_ipv4_arp[2] ),	
+	.rx_k_m1( rx2_k_m1 ), 
+	.rx_k_m2( rx2_k_m2 ), 
+	.rx_k_m3( rx2_k_m3), 
+	.rx_k_m4( rx2_k_m4 ),
+	.rx_data_m1( rx2_data_m1 ), 
+	.rx_data_m2( rx2_data_m2 ), 
+	.rx_data_m3( rx2_data_m3), 
+	.rx_data_m4( rx2_data_m4 ),
+	// Param RAM
+	.dpr_ad( param_phy2_addr ),
+	.dpr_we( param_phy2_we ),
+	.dpr_ce( param_phy2_ce ),
+	.dpr_di( param_phy2_din ),
+	.dpr_do( param_phy2_dout ),
+	// Metrics and Interrupts
+	.mac_int( mac_int[2] ), 
+	.rx_sop( rx_sop[2] ),
+	.rx_eop( rx_eop[2] ),
+	.tx_sop( tx_sop[2] ),
+	.tx_eop( tx_eop[2] ),
+	.metrics_start ( metrics_start ),
+	.metrics_d( metrics_d ),
+	// Debug
+	.rx_active( mac_rx_active[2] ),
+	.tx_active( mac_tx_active[2] )
+);
+
+ipv4_rx ipv4_rx_2(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),	
+		// control
+		.phy_resetn ( phy_resetn[2] ),
+		.phy_up( phy_up[2] ),
+		// packet data
+		.pkt_start( ipv4_pkt_start[2] ),
+		.rx_eop( rx_eop[2] ),
+		.rx_data_m1( rx2_data_m1 ), 
+		.rx_data_m2( rx2_data_m2 ), 
+		.rx_data_m3( rx2_data_m3), 
+		.rx_data_m4( rx2_data_m4 ),	
+		// flags
+		.pkt_complete(ipv4_pkt_complete[2]),
+		.trigger_src_addr(  ),
+		.trigger_dst_addr( trigger[2] ),
+		.keep(  )
+	);
+
+
+pkt_filter pkt_filter_20(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),
+		// input for programming
+		.sel( pkt_filter_sel_20 ),
+		.we( mem_we ),
+		.addr( mem_addr[3:0] ),
+		.d_in( mem_d_i[7:0] ),
+		// registered data
+		.rx_data_m1( rx2_data_m1 ), 
+		.rx_data_m2( rx2_data_m2 ), 
+		.rx_data_m3( rx2_data_m3), 
+		.rx_data_m4( rx2_data_m4 ),	
+		// filter
+		.new_frame ( rx_sop[2] ),
+		.block( rx_sf_almost_full_20 ),
+		.invert( 1'b0 ),
+		.trigger( trigger[2] ),
+		.keep( rx_pf_keep_20 )
+);
+
+drop_fifo drop_fifo_20(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		.enable( 1'b0 ),
+		// control
+		.keep ( rx_pf_keep_20 | rx_mac_keep[2] ),
+		.passthrough( 1'b0 ),
+		// input
+		.we_in( rx_sc_fifo_we[2] ),
+		.wr_done( rx_sc_wr_done[2] ),
+		.d_in( rx_sc_fifo_d2 ),
+		// output
+		.we_out( rx_df_fifo_we_20 ),
+		.d_out( rx_df_fifo_d_20 ),
+		// debug
+		.active( drop_rx2_active[0] )
+	);
+
+sync_fifo sync_fifo_rx_20(
+	.rstn( rstn ),
+	.clk ( pcs_pclk ),
+	// input / RX
+	.we ( rx_df_fifo_we_20 & phy_up[0]),
+	.d_in ( rx_df_fifo_d_20 ),
+	// output / TX
+	.re ( rx_sw_fifo_re_20 ),
+	.d_out( rx_sf_fifo_d_20 ),
+	.empty( rx_sf_fifo_empty_20 ),
+	.almost_full( rx_sf_almost_full_20 ),
+	.reset_ptrs( 1'b0 ),
+	// debug
+	.active( sync_rx2_active[0] )
+);
+
+pkt_filter pkt_filter_21(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),
+		// input for programming
+		.sel( pkt_filter_sel_21 ),
+		.we( mem_we ),
+		.addr( mem_addr[3:0] ),
+		.d_in( mem_d_i[7:0] ),
+		// registered data
+		.rx_data_m1( rx2_data_m1 ), 
+		.rx_data_m2( rx2_data_m2 ), 
+		.rx_data_m3( rx2_data_m3), 
+		.rx_data_m4( rx2_data_m4 ),	
+		// filter
+		.new_frame ( rx_sop[2] ),
+		.block( 1'b0 ),
+		.invert( 1'b0 ),
+		.trigger( trigger[2] ),
+		.keep( rx_pf_keep_21 )
+);
+	
+drop_fifo drop_fifo_21(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		.enable( 1'b0 ),
+		// control
+		.keep ( rx_pf_keep_21 | rx_mac_keep[2] ),
+		.passthrough( 1'b0 ),
+		// input
+		.we_in( rx_sc_fifo_we[2] ),
+		.wr_done( rx_sc_wr_done[2] ),
+		.d_in( rx_sc_fifo_d2 ),
+		// output
+		.we_out( rx_df_fifo_we_21 ),
+		.d_out( rx_df_fifo_d_21 ),
+		// debug
+		.active( drop_rx2_active[1] )
+	);
+
+sync_fifo sync_fifo_rx_21(
+	.rstn( rstn ),
+	.clk ( pcs_pclk ),
+	// input / RX
+	.we ( rx_df_fifo_we_21 & phy_up[1] ),
+	.d_in ( rx_df_fifo_d_21 ),
+	// output
+	.re ( rx_sw_fifo_re_21 ),
+	.d_out( rx_sf_fifo_d_21 ),
+	.empty( rx_sf_fifo_empty_21 ),
+	.almost_full(  ),
+	.reset_ptrs( 1'b0 ),
+	// debug
+	.active( sync_rx2_active[1] )
+);
+
+pkt_filter pkt_filter_2u(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),
+		// input for programming
+		.sel( pkt_filter_sel_2u ),
+		.we( mem_we ),
+		.addr( mem_addr[3:0] ),
+		.d_in( mem_d_i[7:0] ),
+		// registered data
+		.rx_data_m1( rx2_data_m1 ), 
+		.rx_data_m2( rx2_data_m2 ), 
+		.rx_data_m3( rx2_data_m3), 
+		.rx_data_m4( rx2_data_m4 ),	
+		// filter
+		.new_frame ( rx_sop[2] ),
+		.block( tx_uc_block ),
+		.invert( 1'b0 ),
+		.trigger( trigger[2] ),
+		.keep( rx_pf_keep_2u )
+	);
+
+drop_fifo drop_fifo_2u(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		.enable( 1'b0 ),
+		// control
+		.passthrough( 1'b0 ),
+		.keep ( rx_pf_keep_2u | rx_mac_keep[2] ),
+		// input
+		.we_in( rx_sc_fifo_we[2] ),
+		.wr_done( rx_sc_wr_done[2] ),
+		.d_in( rx_sc_fifo_d2 ),
+		// output
+		.we_out( rx_df_fifo_we_2u ), 
+		.d_out( rx_df_fifo_d_2u ),
+		// debug
+		.active( )
+	);
+
+// TODO: add a flag on we to keep UC from being overwritten
+sync_fifo sync_fifo_rx_2u(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		// input / RX
+		.we ( rx_df_fifo_we_2u ),
+		.d_in ( rx_df_fifo_d_2u ),
+		// output
+		.re ( rx_sw_fifo_re_2u ),
+		.d_out( rx_sf_fifo_d_2u ),
+		.empty( rx_sf_fifo_empty_2u ),
+		.almost_full(  ),
+		.reset_ptrs( 1'b0 ),
+		// debug
+		.active(  )
+);
+
+fcs fcs_2(
+	.rstn( rstn ),
+	.clk( pcs_pclk ),
+	.init( fcs_init[2] ),
+	.enable( fcs_enable[2] ), 
+	.addr( fcs_addr2 ),
+	.din( fcs_din2 ),
+	.dout( fcs_dout2 )
+);
+
+// GEODSS SMA (MAC is bypassed)
+mac mac_3(
+		.rstn( ~mac_reset[3] & ~sgmii_rx_los_low[3] ),
+		.phy_resetn ( phy_resetn[3] ),
+		.clk( pcs_pclk ),	
+		.tap_port ( 1'b0 ),
+		// SGMII AN
+		.phy_type(2'b11),		// SMA=3
+		.an_disable(1'b1),
+		.pulse_1_6ms(pulse_1_6ms),
+		.pulse_10ms(pulse_10ms),
+		.fixed_speed(SGMII_SPEED_1GBIT),
+		.an_duplex(  ),
+		.mode_100Mbit( mode_100Mbit[3] ),
+		.phy_up( phy_up[3] ),
+		// Switch I/F
+		.tx_mode( tx_sw_mode3 ),
+		.tx_f( tx_sc_done[3] ),
+		// PCS / SERDES health
+		.rx_lsm( sgmii_lsm_status[3] ),
+		.rx_cv_err ( sgmii_rx_cv_err[3] ),
+		.rx_disp_err( sgmii_rx_disp_err[3] ),
+		.rx_cdr_lol( sgmii_rx_cdr_lol[3] ),
+		.rx_los ( sgmii_rx_los_low[3] ),
+		// PCS data I/F
+		.rx_k( sgmii_rx_k[3] ),
+		.rx_data( rx_data3 ),
+		.tx_k( sgmii_tx_k[3] ),
+		.tx_data( tx_data3 ),
+		.tx_disp_correct( sgmii_tx_disp_correct[3] ),
+		// Flags and Interrupts 
+		.keep( rx_mac_keep[3] ),
+		// TX FCS
+		.fcs_init( fcs_init[3] ),
+		.fcs_enable( fcs_enable[3] ),
+		.fcs_addr( fcs_addr3 ),
+		.fcs_dout( fcs_din3 ),
+		.fcs_din( fcs_dout3 ),
+		// SGMII RX / FIFO Write
+		.rx_fifo_we( rx_sc_fifo_we[3] ),
+		.rx_fifo_d( rx_sc_fifo_d3 ),
+		.rx_error( rx_sc_error[3] ),
+		.rx_wr_done( rx_sc_wr_done[3] ),
+		.rx_byte_cnt(rx3_byte_cnt),
+		// SGMII TX / FIFO Read
+		.tx_byte_cnt_i(tx3_byte_cnt),
+		.tx_fifo_re( tx_sc_fifo_re[3] ),
+		.tx_fifo_d( tx_sw_fifo_d3 ),
+		.tx_fifo_empty( tx_sw_fifo_empty[3] ),
+		// Packet Filter
+		.rx_sample( rx_sample[3] ),
+		.ipv4_pkt_start( ipv4_pkt_start[3] ),
+		.trigger( ),
+		.rx_enet_bcast( rx_enet_bcast[3] ),
+		.rx_ipv4_arp( rx_ipv4_arp[3] ),	
+		.rx_k_m1( rx3_k_m1 ), 
+		.rx_k_m2( rx3_k_m2 ), 
+		.rx_k_m3( rx3_k_m3), 
+		.rx_k_m4( rx3_k_m4 ),
+		.rx_data_m1( rx3_data_m1 ), 
+		.rx_data_m2( rx3_data_m2 ), 
+		.rx_data_m3( rx3_data_m3), 
+		.rx_data_m4( rx3_data_m4 ),
+		// Param RAM
+		.dpr_ad( ),
+		.dpr_we( ),
+		.dpr_ce( ),
+		.dpr_di( 9'h0),
+		.dpr_do( ),
+		// Metrics  and Interrupts
+		.mac_int( mac_int[3] ),
+		.rx_sop( rx_sop[3] ),
+		.rx_eop( rx_eop[3] ),
+		.tx_sop( tx_sop[3] ),
+		.tx_eop( tx_eop[3] ),
+		.metrics_start ( ),
+		.metrics_d ( 9'h0 ),
+		// Debug
+		.rx_active( mac_rx_active[3] ),
+		.tx_active( mac_tx_active[3] )
+
+	);
+
+
+ipv4_rx ipv4_rx_3(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),	
+		// control
+		.phy_resetn ( phy_resetn[3] ),
+		.phy_up( phy_up[3] ),
+		// packet data
+		.pkt_start( ipv4_pkt_start[3] ),
+		.rx_eop( rx_eop[3] ),
+		.rx_data_m1( rx3_data_m1 ), 
+		.rx_data_m2( rx3_data_m2 ), 
+		.rx_data_m3( rx3_data_m3), 
+		.rx_data_m4( rx3_data_m4 ),	
+		// flags
+		.pkt_complete(ipv4_pkt_complete[3]),
+		.trigger_src_addr(  ),
+		.trigger_dst_addr( trigger[3] ),
+		.keep(  )
+	);
+	
+
+
+pkt_filter pkt_filter_30(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),
+		// input for programming
+		.sel( pkt_filter_sel_30 ),
+		.we( mem_we ),
+		.addr( mem_addr[3:0] ),
+		.d_in( mem_d_i[7:0] ),
+		// registered data
+		.rx_data_m1( rx3_data_m1 ), 
+		.rx_data_m2( rx3_data_m2 ), 
+		.rx_data_m3( rx3_data_m3), 
+		.rx_data_m4( rx3_data_m4 ),	
+		// filter
+		.new_frame ( rx_sop[3] ),
+		.block( 1'b0 ),
+		.invert( 1'b0 ),
+		.trigger( trigger[3] ),
+		.keep( rx_pf_keep_30 )
+	);
+
+drop_fifo drop_fifo_30(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		.enable( 1'b0 ),
+		// control
+		.keep ( rx_pf_keep_30 | rx_mac_keep[3] ),
+		.passthrough( 1'b0 ),
+		// input
+		.we_in( rx_sc_fifo_we[3] ),
+		.wr_done( rx_sc_wr_done[3] ),
+		.d_in( rx_sc_fifo_d3 ),
+		// output
+		.we_out( rx_df_fifo_we_30 ),
+		.d_out( rx_df_fifo_d_30 ),
+		// debug
+		.active( drop_rx3_active[0] )
+	);
+	
+sync_fifo sync_fifo_rx_30(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		// input
+		.we ( rx_df_fifo_we_30 & phy_up[0] ),
+		.d_in ( rx_df_fifo_d_30 ),
+		// output
+		.re ( rx_sw_fifo_re_30 ),
+		.d_out( rx_sf_fifo_d_30 ),
+		.empty( rx_sf_fifo_empty_30 ),
+		.almost_full(  ),
+		.reset_ptrs( 1'b0 ),
+		// debug
+		.active( sync_rx3_active[0] )
+	);
+	
+pkt_filter pkt_filter_31(
+		.rstn( rstn ),
+		.clk( pcs_pclk ),
+		// input for programming
+		.sel( pkt_filter_sel_31 ),
+		.we( mem_we ),
+		.addr( mem_addr[3:0] ),
+		.d_in( mem_d_i[7:0] ),
+		// registered data
+		.rx_data_m1( rx3_data_m1 ), 
+		.rx_data_m2( rx3_data_m2 ), 
+		.rx_data_m3( rx3_data_m3), 
+		.rx_data_m4( rx3_data_m4 ),	
+		// filter
+		.new_frame ( rx_sop[3] ),
+		.block( 1'b0 ),
+		.invert( 1'b0 ),
+		.trigger( trigger[3] ),
+		.keep( rx_pf_keep_31 )
+	);
+
+drop_fifo drop_fifo_31(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		.enable( 1'b0 ),
+		// control
+		.keep ( rx_pf_keep_31 | rx_mac_keep[3] ),
+		.passthrough( 1'b0 ),
+		// input
+		.we_in( rx_sc_fifo_we[3] ),
+		.wr_done( rx_sc_wr_done[3] ),
+		.d_in( rx_sc_fifo_d3 ),
+		// output
+		.we_out( rx_df_fifo_we_31 ),
+		.d_out( rx_df_fifo_d_31 ),
+		// debug
+		.active( drop_rx3_active[1] )
+	);
+	
+sync_fifo sync_fifo_rx_31(
+		.rstn( rstn ),
+		.clk ( pcs_pclk ),
+		// input
+		.we ( rx_df_fifo_we_31 & phy_up[1] ),
+		.d_in ( rx_df_fifo_d_31 ),
+		// output
+		.re ( rx_sw_fifo_re_31 ),
+		.d_out( rx_sf_fifo_d_31 ),
+		.empty( rx_sf_fifo_empty_31 ),
+		.almost_full(  ),
+		.reset_ptrs( 1'b0 ),
+		// debug
+		.active( sync_rx3_active[1] )
+	);
+	
+fcs fcs_3(
+	.rstn( rstn ),
+	.clk( pcs_pclk ),
+	.init( fcs_init[3] ),
+	.enable( fcs_enable[3] ), 
+	.addr( fcs_addr3 ),
+	.din( fcs_din3 ),
+	.dout( fcs_dout3 )
+);
+
+/* 
+ * uCont i/f FIFO 
+ * FIFO side connects to network switch
+ * RX: processor writes (data into switch)
+ * TX: processor reads (data from switch)
+ */
+half_fifo  #(.DPRAM_DEPTH(9)) micro_fifo_0 (
+		.rstn(  rstn  ),
+		.uc_clk(clk_10),
+		.fifo_clk(pcs_pclk),
+		// UC interrupt support
+		.fifo_we_int ( micro_fifo_int ),
+		// TX mode
+		.tx_mode(tx_sw_modeu),
+		// DPRAM common
+		.dpram_addr( mem_addr[8:0] ),
+		.dpram_din( mem_d_i[8:0] ), 
+		.dpram_dout( micro_fifo_do ),
+		.dpram_we( mem_we ),
+		.dpram_oe( mem_oe ),
+		// UC select signals
+		.dpram_ptrs_sel( dpram_ptrs_sel ),
+		.dpram_rx_sel( dpram_rx_sel ),
+		.dpram_tx_sel( dpram_tx_sel ),
+		// FIFO TX (input)
+		.fifo_we( tx_sw_fifo_we ),
+		.fifo_d_in( tx_sw_fifo_du ),
+		// FIFO RX (output)
+		.fifo_re( rx_sw_fifo_re_u2 ),
+		.fifo_d_out( rx_uc_fifo_d_u2 ),
+		// FIFO flags
+		.rx_empty( rx_uc_fifo_empty_u2 ),
+		.tx_full ( tx_uc_block )
+	);
+
+/*
+ * Param RAM
+ */
+dpram param_ram_2(
+        .rstn(rstn),
+        .a_clk(clk_10),
+        .a_clk_e(param_sel[2]),
+        .a_we(mem_we),
+        .a_oe(mem_oe),
+        .a_addr(mem_addr),
+        .a_din(mem_d_i[8:0]),
+        .a_dout(param_ram_2_do),
+        // port B
+        .b_clk( pcs_pclk),
+        .b_clk_e(param_phy2_ce),
+        .b_we(param_phy2_we),
+        .b_oe( 1'b1  ),
+        .b_addr( param_phy2_addr ),
+        .b_din( param_phy2_dout ),
+        .b_dout( param_phy2_din )
+);
+
+//defparam param_ram_2.dp16kd_inst.INITVAL_00 = "00000000000000000000000000000000000000000000000000000000000000000022E10069F00800";
+											        
+
+
+/* 
+*	PCS Notes:
+*	All _c control signals are asynch in the SERDES/PCS
+*	All _s control signals are asynch and should be clocked before being used
+*	TxPLL provides system clock for FPGA logic
+* 	tx_full_clk uses wire name 'txclk' and feeds both txi_clk and rxi_clk, as shown in Figure 9-27
+*	For SGMII, tx_pclk is fed back internally to rxi_clk and ebrd_clk
+*	ebrd_clk: CTC FIFO Read Clock per Channel
+*
+*/
+
+assign ext_sci_int = sci_int[0];
+
+/*
+PCSCLKDIV pcsclkdiv0 (
+	.RST( ~rstn ),
+	.CLKI( refclko ),
+	.SEL2( 1'b1 ), 	// 101 is div by 8
+	.SEL1( 1'b0 ),
+	.SEL0( 1'b1 ),
+	.CDIV1( ),
+	.CDIVX( )
+);
+*/
+ 
+/* 
+ * PCS block that encapsulates two DCUs and the SCI block 
+ */
+ assign pcs_error[0] = sgmii_rx_cv_err[0] | sgmii_rx_cdr_lol[0] | !sgmii_lsm_status[0] | sgmii_rx_los_low[0];
+ assign pcs_error[1] = sgmii_rx_cv_err[1] | sgmii_rx_cdr_lol[1] | !sgmii_lsm_status[1] | sgmii_rx_los_low[1];
+ assign pcs_error[2] = sgmii_rx_cv_err[2] | sgmii_rx_cdr_lol[2] | sgmii_rx_los_low[2];
+ assign pcs_error[3] = sgmii_rx_cv_err[3] | sgmii_rx_cdr_lol[3] | sgmii_rx_los_low[3];
+ 
+pcs pcs_0 (
+
+	.refclk0_refclkn(refclkp_d0), 
+	.refclk0_refclkp(refclkn_d0), 
+	.refclk0_refclko( refclko ),
+
+	// cross DCU tie offs
+	.sgmii0_cyawstn( 1'b0 ),
+
+	//DCU0 CH0 to PHY0
+    .sgmii0_hdinn(sgmii0_hdinn), 
+	.sgmii0_hdinp(sgmii0_hdinp), 
+	.sgmii0_hdoutn(sgmii0_hdoutn), 
+	.sgmii0_hdoutp(sgmii0_hdoutp), 
+	
+	// DCU resets
+	.sgmii0_tx_serdes_rst_c( tx_serdes_rst[0] ),			// rset LOL signal in PLL TODO: change this
+	.sgmii0_rst_dual_c( pcs_rst_dual[0] ), 					// resets all serdes channels including aux and PCS
+	.sgmii0_serdes_rst_dual_c( serdes_rst_dual[0] ),		// resets serdes dual gated by fpga_reset_enable
+	
+	// channel resets
+	.sgmii0_rx_pcs_rst_c( rx_pcs_rst[0] ),			// reset channel PCS logic
+	.sgmii0_rx_serdes_rst_c( rx_serdes_rst[0] ),	// reset digital logic in serdes rx
+	.sgmii0_tx_pcs_rst_c( tx_pcs_rst[0] ),			// reset channel PCS logic
+	
+	.sgmii0_rx_pwrup_c(1'b1),			// channel power up
+	.sgmii0_tx_pwrup_c(1'b1), 			// channel power up
+	
+	/* tx_pclk: Transmit Primary Clock. Direct connection to Primary
+	 * clock network. When gearing is not enabled, this output
+	 * equals the transmit full rate clock. When 2:1 gearing
+	 * is enabled, it is a divide-by-2 half-rate clock.    
+	 */
+	.sgmii0_tx_pclk( pcs_pclk ),	// direct connection from primary clock network
+	.sgmii0_txi_clk( pcs_pclk ),	// clocks the TX UI FIFOS (see Figure 27)
+	
+    .sgmii0_tx_disp_correct(sgmii_tx_disp_correct[0]), 	
+    .sgmii0_tx_k(sgmii_tx_k[0]), 
+	.sgmii0_txdata( tx_data0 ), 
+	.sgmii0_xmit(1'b0), 						//TODO: Auto Neg state machine	
+    .sgmii0_signal_detect_c(1'b1),	
+	.sgmii0_rx_cv_err( sgmii_rx_cv_err[0] ),	// code violation with associated data, PCS will drive 0xEE and K=1 (Table 9-4)
+    .sgmii0_rx_disp_err( sgmii_rx_disp_err[0] ), 
+	.sgmii0_rx_k( sgmii_rx_k[0] ), 
+	.sgmii0_rxdata( rx_data0 ), 
+    .sgmii0_lsm_status_s( sgmii_lsm_status[0] ), 	// lane is synced with commas ( 0 means no commas detected )  
+    .sgmii0_rx_cdr_lol_s( sgmii_rx_cdr_lol[0] ), 	// CDR Loss of lock
+	.sgmii0_rx_los_low_s( sgmii_rx_los_low[0] ),	// Loss of signal (LO THRESHOLD RANGE) detection    
+
+	.sgmii0_ctc_ins_s(), 			// skip char added by CTC
+	.sgmii0_ctc_orun_s(), 			// CTC FIFO over run error
+	.sgmii0_ctc_urun_s(),			// CTC FIFO under run error
+	.sgmii0_ctc_del_s(), 			// skip char deleted by CTC
+	.sgmii0_pll_lol( pll_lol[0] ),
+	
+	//DCU0 CH1 to PHY1
+	.sgmii1_hdinn( sgmii1_hdinn ), 
+	.sgmii1_hdinp( sgmii1_hdinp ), 
+	.sgmii1_hdoutn( sgmii1_hdoutn ),
+	.sgmii1_hdoutp( sgmii1_hdoutp ), 
+	
+	// DCU resets
+	.sgmii1_rst_dual_c( pcs_rst_dual[0] ),
+	.sgmii1_serdes_rst_dual_c( serdes_rst_dual[0] ),
+	.sgmii1_tx_serdes_rst_c( tx_serdes_rst[0] ),
+	
+	// Channel resets
+    .sgmii1_rx_pcs_rst_c( rx_pcs_rst[1] ),
+	.sgmii1_rx_serdes_rst_c( rx_serdes_rst[1] ),
+	.sgmii1_tx_pcs_rst_c( tx_pcs_rst[1] ),
+	
+	.sgmii1_rx_pwrup_c( 1'b1 ), 	
+	.sgmii1_tx_pwrup_c( 1'b1 ),
+ 	.sgmii1_serdes_pdb( 1'b1 ), 
+	
+    .sgmii1_tx_pclk( ), 
+    .sgmii1_txi_clk( pcs_pclk ),
+
+	.sgmii1_rx_cv_err( sgmii_rx_cv_err[1] ), 
+    .sgmii1_rx_disp_err( sgmii_rx_disp_err[1] ), 
+	.sgmii1_rx_k( sgmii_rx_k[1] ), 
+	.sgmii1_rxdata( rx_data1 ), 
+	.sgmii1_tx_disp_correct( sgmii_tx_disp_correct[1] ), 
+    .sgmii1_tx_k(  sgmii_tx_k[1] ), 
+	.sgmii1_txdata( tx_data1 ), 
+	.sgmii1_xmit( 1'b0 ), 				// TODO: Auto Negotiation Bit
+	
+	.sgmii1_signal_detect_c( 1'b1 ), 
+	
+	.sgmii1_ctc_del_s(), 
+	.sgmii1_ctc_ins_s(), 
+	.sgmii1_ctc_orun_s(),	
+    .sgmii1_ctc_urun_s(), 
+	
+	.sgmii1_lsm_status_s( sgmii_lsm_status[1] ), 
+	.sgmii1_rx_cdr_lol_s( sgmii_rx_cdr_lol[1] ), 
+	.sgmii1_rx_los_low_s( sgmii_rx_los_low[1] ),
+
+	// DCU1 CH0 to Expansion
+	.sgmii2_hdinn( sgmii2_hdinn ), 
+	.sgmii2_hdinp( sgmii2_hdinp ), 
+	.sgmii2_hdoutn( sgmii2_hdoutn ),
+	.sgmii2_hdoutp( sgmii2_hdoutp ), 
+	
+	// DCU Tie Offs
+	.sgmii2_cyawstn( 1'b0 ),
+	
+	// DCU resets
+	.sgmii2_rst_dual_c(  pcs_rst_dual[1] ),
+	.sgmii2_serdes_rst_dual_c( serdes_rst_dual[1] ),
+	.sgmii2_tx_serdes_rst_c( tx_serdes_rst[1] ),
+
+	// Channel resets
+	.sgmii2_rx_pcs_rst_c( rx_pcs_rst[2] ),
+	.sgmii2_rx_serdes_rst_c( rx_serdes_rst[2] ),
+	.sgmii2_tx_pcs_rst_c( tx_pcs_rst[2] ),
+	
+	.sgmii2_rx_pwrup_c( 1'b1 ), 	
+	.sgmii2_tx_pwrup_c( 1'b1 ),
+	.sgmii2_serdes_pdb( 1'b1 ), 
+	
+    .sgmii2_tx_pclk( ),
+    .sgmii2_txi_clk( pcs_pclk ),
+
+	.sgmii2_rx_cv_err( sgmii_rx_cv_err[2] ), 
+    .sgmii2_rx_disp_err( sgmii_rx_disp_err[2] ), 
+	.sgmii2_rx_k( sgmii_rx_k[2] ), 
+	.sgmii2_rxdata( rx_data2 ), 
+	.sgmii2_tx_disp_correct( sgmii_tx_disp_correct[2] ), 
+    .sgmii2_tx_k( sgmii_tx_k[2] ), 
+	.sgmii2_txdata( tx_data2 ),
+	.sgmii2_xmit( 1'b0 ), 
+	
+	.sgmii2_signal_detect_c( 1'b1 ), 
+	
+	.sgmii2_ctc_del_s(), 
+	.sgmii2_ctc_ins_s(), 
+	.sgmii2_ctc_orun_s(),	
+    .sgmii2_ctc_urun_s(), 
+	
+	.sgmii2_lsm_status_s( sgmii_lsm_status[2] ), 
+	.sgmii2_rx_cdr_lol_s( sgmii_rx_cdr_lol[2] ), 
+	.sgmii2_rx_los_low_s( sgmii_rx_los_low[2] ),
+	
+	.sgmii2_pll_lol( pll_lol[1] ),
+	
+	// DCU1 CH1 to Expansion
+	.sgmii3_hdinn( sgmii3_hdinn ), 
+	.sgmii3_hdinp( sgmii3_hdinp ), 
+	.sgmii3_hdoutn( sgmii3_hdoutn ),
+	.sgmii3_hdoutp( sgmii3_hdoutp ),
+	
+	// DCU resets
+	.sgmii3_rst_dual_c( pcs_rst_dual[1] ),
+	.sgmii3_serdes_rst_dual_c( serdes_rst_dual[1] ),
+	.sgmii3_tx_serdes_rst_c( tx_serdes_rst[1] ),
+	
+	// Channel resets
+	.sgmii3_rx_pcs_rst_c( rx_pcs_rst[3] ),
+	.sgmii3_rx_serdes_rst_c( rx_serdes_rst[3] ),
+	.sgmii3_tx_pcs_rst_c( tx_pcs_rst[3] ),
+	
+	.sgmii3_rx_pwrup_c( 1'b1 ), 	
+	.sgmii3_tx_pwrup_c( 1'b1 ),
+	
+	.sgmii3_tx_pclk( ), 
+	.sgmii3_txi_clk( pcs_pclk ),
+
+	.sgmii3_rx_cv_err( sgmii_rx_cv_err[3] ), 
+	.sgmii3_rx_disp_err( sgmii_rx_disp_err[3] ), 
+	.sgmii3_rx_k( sgmii_rx_k[3] ), 
+	.sgmii3_rxdata( rx_data3 ), 
+	.sgmii3_tx_disp_correct( sgmii_tx_disp_correct[3] ), 
+`ifdef SHIELD_SFP_SMA
+	.sgmii3_tx_k(rx2_k_m1), 				// MAC 2 RX k  
+	.sgmii3_txdata(rx2_data_m1),			// MAC 2 RX data
+`else
+	.sgmii3_tx_k(  sgmii_tx_k[3] ), 
+	.sgmii3_txdata( tx_data3 ),
+`endif
+	.sgmii3_xmit( 1'b0 ), 				// TODO: Auto Negotiation Bit
+	.sgmii3_signal_detect_c( 1'b1 ), 
+	
+	.sgmii3_ctc_del_s(), 
+	.sgmii3_ctc_ins_s(), 
+	.sgmii3_ctc_orun_s(),	
+	.sgmii3_ctc_urun_s(), 
+	
+	.sgmii3_lsm_status_s( sgmii_lsm_status[3] ), 
+	.sgmii3_rx_cdr_lol_s( sgmii_rx_cdr_lol[3] ), 
+	.sgmii3_rx_los_low_s( sgmii_rx_los_low[3] ),
+
+	
+	// DCU0 SCI 
+	.sgmii0_sci_sel_dual( sci_sel_dual[0] ),
+	.sgmii0_sci_en_dual( 1'b1 ),
+	.sgmii0_sci_addr( mem_addr[5:0] ),		// SCI Register Address Bits
+	.sgmii0_sci_rddata( sci_rddata0 ),
+	.sgmii0_sci_wrdata( mem_d_i[7:0] ),
+	.sgmii0_sci_rd( ~fb_oen ),
+	.sgmii0_sci_wrn( fb_rwn ),
+
+	
+	.sgmii0_sci_sel( sci_sel_ch[0] ),
+	.sgmii0_sci_en( 1'b1 ),
+	
+	.sgmii1_sci_sel( sci_sel_ch[1] ),
+	.sgmii1_sci_en( 1'b1 ),
+	
+	.sgmii0_sci_int( sci_int[1] ),
+	
+	// DCU1 SCI
+	.sgmii2_sci_sel_dual( sci_sel_dual[1] ),
+	.sgmii2_sci_en_dual( 1'b1 ),	
+	.sgmii2_sci_addr( mem_addr[5:0] ),		// SCI Register Address Bits
+	.sgmii2_sci_rddata( sci_rddata1 ),
+	.sgmii2_sci_wrdata( mem_d_i[7:0] ),
+	.sgmii2_sci_rd( ~fb_oen ),
+	.sgmii2_sci_wrn( fb_rwn ),
+	
+	.sgmii2_sci_sel( sci_sel_ch[2] ),
+	.sgmii2_sci_en( 1'b1 ),
+
+	.sgmii2_sci_int( sci_int[0] ),
+	
+	.sgmii3_sci_sel( sci_sel_ch[3] )
+	
+);
+
+// Link Timer for AN
+link_timer link_timer_0(
+	.rstn(rstn),
+	.clk(pcs_pclk),
+	.pulse_1_6ms(pulse_1_6ms),
+	.pulse_10ms(pulse_10ms)
+);
+
+mdio_controller #(.ADDR_SZ( MDIO_ROM_ADDR_SZ )) mdio_controller_0
+(
+	.rstn(rstn),
+	.clk(clk_10),
+	.work_start(mdio_cont_work_start),
+	.work_run(mdio_cont_work_run),
+	.work_done(mdio_cont_work_done),
+	.routine_addr( mdio_routine_addr ),
+	.buffer_full(1'b0),
+	.addr(rom_a),
+	.di(rom_d),
+	.reg_addr(mdio_reg_addr),		
+	.dout(mdio_wd),
+	.ld(mdio_ld),
+	.rwn(mdio_rwn),
+	.done(mdio_done)
+);
+
+`ifdef PHY_MARVELL
+mdio_data_mvl  #(.ADDR_SZ( MDIO_ROM_ADDR_SZ )) mdio_data_mvl_0(
+	.ad( rom_a ),
+	.page( mdio_page_set ),
+	.reg_addr( mdio_reg_addr_set ),
+	.data_in_h( mdio_w_data_h_set ),
+	.data_in_l( mdio_w_data_l_set ),
+	.d( rom_d ),
+	.oe( ~mdio_mux_sel[1] )
+);
+`endif
+	
+mdio_data_ti  #(.ADDR_SZ( MDIO_ROM_ADDR_SZ )) mdio_data_ti_0(
+	.ad( rom_a ),
+	.page( mdio_page_set ),
+	.reg_addr( mdio_reg_addr_set ),
+	.data_in_h( mdio_w_data_h_set ),
+	.data_in_l( mdio_w_data_l_set ),
+	.d( rom_d ),
+	.oe( 1'b1 )
+);
+
+
+/* MDIO mux and output enables */
+always @(*) begin
+	case (mdio_mux_sel)
+		2'b00: mdi = phy0_mdio;
+		2'b01: mdi = phy1_mdio;
+		2'b10: mdi = phy2_mdio;	// compile as 0 if GIGE_SHIELD isn't defined
+		2'b11: mdi = 1'b1;  
+	endcase
+end
+
+assign phy0_mdio = (mdo_oe & ~mdio_mux_sel[1] & ~mdio_mux_sel[0]) ? mdo : 1'bz;
+assign phy1_mdio = (mdo_oe & ~mdio_mux_sel[1] & mdio_mux_sel[0]) ? mdo : 1'bz;
+assign phy2_mdio = (mdo_oe & mdio_mux_sel[1] & ~mdio_mux_sel[0]) ? mdo : 1'bz;
+	
+mdio mdio_0(
+	.rstn(rstn),
+	.mdc(clk_10),
+	// MDIO
+	.mdi(mdi),
+	.mdo(mdo),
+	.mdo_oe(mdo_oe),
+	// mdio controller interface
+	.rwn(mdio_rwn),
+	.phy_addr(5'h00),
+	.reg_addr(mdio_reg_addr),
+	.di(mdio_wd),
+	.ld(mdio_ld),
+	.run( mdio_run ),
+	.done(mdio_done),       // signal controller that mdio xfer is done
+	// output port to converter
+	.dout(mdio_rd),
+	.we( mdio_rd_we )
+);
+
+
+spi spi_0 (
+	.rstn(rstn),
+	.clk(clk_10),
+	// spi signals
+	.spi_cs( spi_cs ),
+	.spi_clk( spi_clk ),
+	.spi_d_in( spi_mosi),
+	.spi_d_o( spi_do ),
+	.spi_d_oe(spi_do_e ),
+	// internal FPGA memory 
+	.mem_addr( mem_addr ),
+	.mux_sel ( mem_do_mux_sel ),
+	.d_i( mem_d_o ),
+	.d_o( mem_d_i ),
+	// individual memory selects
+	.we( mem_we ),
+	.oe( mem_oe ),
+	.dpram_tx_sel( dpram_tx_sel ),
+	.dpram_rx_sel( dpram_rx_sel ),
+	.dpram_ptrs_sel( dpram_ptrs_sel ),
+	.param_sel( param_sel ),
+	.pkt_filter_sel_01( pkt_filter_sel_01 ),
+	.pkt_filter_sel_02( pkt_filter_sel_02 ),
+	.pkt_filter_sel_03( pkt_filter_sel_03 ),
+	.pkt_filter_sel_10( pkt_filter_sel_10 ),
+	.pkt_filter_sel_12( pkt_filter_sel_12 ),
+	.pkt_filter_sel_13( pkt_filter_sel_13 ),
+	.pkt_filter_sel_20( pkt_filter_sel_20 ),
+	.pkt_filter_sel_21( pkt_filter_sel_21 ),
+	.pkt_filter_sel_23( pkt_filter_sel_23 ),
+	.pkt_filter_sel_2u( pkt_filter_sel_2u ),
+	.pkt_filter_sel_30( pkt_filter_sel_30 ),
+	.pkt_filter_sel_31( pkt_filter_sel_31 ),
+	.pkt_filter_sel_32( pkt_filter_sel_32 ),
+	.pkt_filter_sel_u2( pkt_filter_sel_u2 ),
+	.interrupts_sel( int_sel ),
+	.sci_sel_dual( sci_sel_dual ),
+	.sci_sel_ch( sci_sel_ch )
+);
+
+assign spi_miso = spi_do_e ? spi_do : 1'bz;
+
+/* data mux out of internal memories */
+always@(*)
+begin
+	case(mem_do_mux_sel)
+		5'b00000:	mem_d_o = { 2'b0, sci_rddata1 };
+		5'b00001:	mem_d_o = { 2'b0, sci_rddata0 };
+		5'b00010:	mem_d_o = { 1'b0, micro_fifo_do };
+		5'b00011:	mem_d_o = { 1'b0, micro_fifo_do };
+		5'b00100:	mem_d_o = { 1'b0, micro_fifo_do };
+		5'b01000:	mem_d_o = param_ram_0_do;
+		5'b01001:	mem_d_o = param_ram_1_do;
+		5'b01010:	mem_d_o = param_ram_2_do;
+		5'b01011:	mem_d_o = param_ram_3_do;
+		5'b10000:   mem_d_o = { 2'b0, int_do };
+		default: mem_d_o = 9'h0;
+	endcase
+end
+
+`ifdef DARSENA_V01
+
+// only drive the FB AD bus when OE is asserted
+assign fb_ad = fb_ad_oe ? fb_d : 10'bz;
+
+
+always@(*)
+	begin
+		case({fb_cregs_sel,mem_do_mux_sel})
+			6'b000000:	fb_d = { 2'b0, sci_rddata1 };
+			6'b000001:	fb_d = { 2'b0, sci_rddata0 };
+			6'b000010:	fb_d = { 1'b0, micro_fifo_do };
+			6'b000011:	fb_d = { 1'b0, micro_fifo_do };
+			6'b000100:	fb_d = { 1'b0, micro_fifo_do };
+			6'b010000:  fb_d = { 2'b0, int_do };
+			default: fb_d = fb_ad_o;
+		endcase
+	end
+
+	
+flexbus flexbus_0(
+	.clk( fb_clk ),
+	.rstn( rstn ),
+	// strobes
+	.fb_ale( fb_ale ),
+	.fb_oen( fb_oen ),
+	.fb_rwn( fb_rwn ),
+	.fb_csn( fb_csn ),
+	// control
+	.cregs_sel( fb_cregs_sel ),
+	// muxed addr and data
+	.fb_ad_i( fb_ad ),
+	.fb_ad_o( fb_ad_o ),
+	.fb_ad_oe( fb_ad_oe ),
+	// sys mem 
+	.mem_addr( mem_addr ),
+	.mux_sel ( mem_do_mux_sel ),
+	// dpram controls
+	.dpram_we( mem_we ),
+	.dpram_oe( mem_oe ),
+	.dpram_tx_sel( dpram_tx_sel ),
+	.dpram_rx_sel( dpram_rx_sel ),
+	.dpram_ptrs_sel( dpram_ptrs_sel ),
+	.param_sel( param_sel ),
+	.pkt_filter_sel_01( pkt_filter_sel_01 ),
+	.pkt_filter_sel_02( pkt_filter_sel_02 ),
+	.pkt_filter_sel_10( pkt_filter_sel_10 ),
+	.pkt_filter_sel_12( pkt_filter_sel_12 ),
+	.pkt_filter_sel_20( pkt_filter_sel_20 ),
+	.pkt_filter_sel_21( pkt_filter_sel_21 ),
+	.pkt_filter_sel_23( pkt_filter_sel_23 ),
+	.interrupts_sel( int_sel ),
+	// SCI I/F
+	.sci_sel_dual( sci_sel_dual ),
+	.sci_sel_ch( sci_sel_ch )
+);
+
+`endif
+
+interrupts interrupts_0(
+	.rstn( rstn ),	
+	.clk( pcs_pclk ),
+	.uc_clk( clk_10 ),
+	// uC interface
+	.sel( int_sel ),
+	.we( mem_we ),
+	.addr( mem_addr[0] ),
+	.d_in( mem_d_i[6:0] ),
+	.d_out( int_do ),
+	// interrupt sources
+	.cont_int( micro_fifo_int ),
+	.phy_int ( { 2'b0, phy1_intn, phy0_intn }),
+	.mac_int ( { mac_int[3], mac_int[2], mac_int[1], mac_int[0] } ),
+	.int_o(  )
+);
+
+
+assign i2c_sda = sda_oe ? sda_o : 1'bz;
+assign i2c_scl = scl_oe ? scl_o : 1'bz;
+
+i2c i2c_0(
+	.rstn( rstn ),
+	.clk( clk_10 ),
+	// external I2C I/O
+	.scl_i( i2c_scl ),
+	.scl_o( scl_o ),
+	.scl_oe( scl_oe ),
+	.sda_i( i2c_sda ),
+	.sda_o( sda_o ),
+	.sda_oe( sda_oe ),
+	// shared memory and controller data output
+	.mem_do( i2c_d_o ),
+	// dedicated memory interface
+	.mem_ad(  ),
+	.mem_we(  ),
+	.mem_ce( ),
+	.mem_di( 8'haa ),
+	// dedicated controller write interface
+	.cont_we( i2c_cont_we ),
+	.cont_done( i2c_cont_done ),
+	// Controller->FIFO input interface
+	.fifo_re( i2c_fifo_re ),
+	.tx_fifo_empty(  cont_fifo_empty ),
+	.fifo_di( fifo_r_d[6:0] )
+);
+
+
+/* 
+*	ext_sys_fifo delays and enables:
+*	we need the re delay since we need to generate a re pulse from the 
+*	uart block, which is clocked at a slower rate.  
+*	we need the mdio_we delay since the fifo is clocked twice: high and low data
+*
+*/
+always@ ( posedge clk_10 or negedge rstn )
+	begin
+		if ( !rstn )
+			begin
+				cont_fifo_re_m1 <= 1'b0;
+				cont_fifo_re_m2 <= 1'b0;
+			end
+		else
+			begin
+				cont_fifo_re_m1 <= uart_fifo_re | i2c_fifo_re;
+				cont_fifo_re_m2 <= cont_fifo_re_m1;
+			end
+	end
+
+// create a single re pulse since uart runs slow.
+assign i_cont_fifo_re = cont_fifo_re_m1 & ~cont_fifo_re_m2;
+
+assign bin_to_ascii_we = mdio_rd_we | cont_rd_we;
+assign bin_to_ascii_d_in = read_fifo_mux_sel ? mdio_rd : cont_rd;
+
+/* 
+ * Input: MDIO writes
+ * Output: UART/I2C read FIFO
+ */
+bin_to_ascii bin_to_ascii_0(
+	.rstn( rstn ),
+	.clk( clk_10 ),
+	.width ( 1'b1 ),
+	// mdio interface
+	.we_i ( bin_to_ascii_we ),
+	.d_in( bin_to_ascii_d_in ),
+	// mdio controller interface
+	.run ( bin_to_ascii_run ),
+	.done (),
+	.busy( 1'b0 ),
+	// fifo port
+	.we_o ( read_fifo_we ),
+	.d_out( read_fifo_d_i )
+);
+
+/*
+ * Input: bin_to_ascii
+ * Output: I2C or UART read
+ */
+sync_fifo ext_sys_fifo_0(
+	.rstn( rstn ),
+	.clk ( clk_10 ),
+	// input
+	.we ( read_fifo_we ),
+	.d_in ( { 2'b0, read_fifo_d_i } ),
+	// output
+	.re ( i_cont_fifo_re ),
+	.d_out( fifo_r_d ),
+	.empty( cont_fifo_empty ),
+	.almost_full(  ),
+	.reset_ptrs( 1'b0 ),
+	// debug
+	.active( )
+);
+
+always @(*) begin
+	case (mdio_mux_sel)
+		2'b00: rx_cdr_lol = sgmii_rx_cdr_lol[0];
+		2'b01: rx_cdr_lol = sgmii_rx_cdr_lol[1];
+		2'b10: rx_cdr_lol = sgmii_rx_cdr_lol[2];
+		2'b11: rx_cdr_lol = 1'b1;  
+	endcase
+end
+
+always @(*) begin
+	case (mdio_mux_sel)
+		2'b00: lsm_status = sgmii_lsm_status[0];
+		2'b01: lsm_status = sgmii_lsm_status[1];
+		2'b10: lsm_status = sgmii_lsm_status[2];
+		2'b11: lsm_status = 1'b1;  
+	endcase
+end
+
+always @(*) begin
+	case (mdio_mux_sel)
+		2'b00: rx_los_low = sgmii_rx_los_low[0];
+		2'b01: rx_los_low = sgmii_rx_los_low[1];
+		2'b10: rx_los_low = sgmii_rx_los_low[2];
+		2'b11: rx_los_low = 1'b1;  
+	endcase
+end
+	
+/* Debug and Arduino Expansion */
+
+assign led[0] = 1'b1;
+assign led[1] = phy_up[0];
+assign led[2] = phy_up[1];
+	
+`ifdef DEBUG_SPI
+	assign ard_scl = spi_clk;
+	assign ard_sda = spi_cs;
+	assign ard_rxd1 = spi_do_e ? spi_do : 1'bz;
+	assign ard_txd1 = spi_mosi;
+`elsif DEBUG_MDIO
+	assign ard_scl = phy_mdc;
+	assign ard_sda = phy0_mdio;
+	assign ard_rxd1 = 1'bz;
+	assign ard_txd1 = refclko;
+`elsif DEBUG_IC2
+	assign ard_scl = i2c_scl;
+	assign ard_sda = sda_oe ? sda_o : i2c_sda;
+	assign ard_rxd1 = 1'bz;
+	assign ard_txd1 = sda_oe;
+`else 
+	assign ard_scl = rx_sop[0];
+	assign ard_sda = 1'bz;
+`endif
+
+`ifdef ARD_EXP_UART
+	assign ard_txd2 = uart_txd;
+	assign uart_rxd = ard_rxd2;
+	assign ftdi_tdi_rxd = 1'bz;
+`else
+	
+	// assign uart_rxd = ftdi_tck_txd;	
+`endif
+
+	assign ftdi_tdi_rxd = 1'bz;
+
+	assign 	pe1 = pcs_error[2];		// RX data on SFP good
+	assign  pe4  = ~sgmii_tx_k[2];
+	assign  pe5  = phy1_gpio[1];
+	assign  pg5  = 1'bz;
+	assign  pe3  = fpga_gpio;
+
+`ifdef SHIELD_SFP_SMA
+
+	// SFP UART testing
+	assign uart_rxd = ph3;
+	assign ph4 = uart_txd;
+
+	// SFP LEDS
+	assign sfp_led1 = !sfp_pres_n;
+	assign sfp_led2 = !sfp_tx_fault;
+	assign sfp_led3 = !sfp_los;
+	assign sfp_led4 = !pcs_error[2];
+	assign sfp_led5 = phy_up[0];
+	assign sfp_led6 = !mac_tx_active[0];
+`endif
+	
+	assign fpga_int = pcs_error[2] | pcs_error[3];
+	
+`ifdef DARSENA_V02
+	assign fpga_jtag_e =1'b1;
+`endif
+
+endmodule
diff --git a/source/top.v b/source/top.v
deleted file mode 100644
index 4944bae..0000000
--- a/source/top.v
+++ /dev/null
@@ -1,2432 +0,0 @@
-/*
- *       top.v
- *
- *       Copyright (C) 2018, 2019, 2020 Mind Chasers Inc.
- *       
- *   Licensed under the Apache License, Version 2.0 (the "License");
- *   you may not use this file except in compliance with the License.
- *   You may obtain a copy of the License at
- *
- *       http://www.apache.org/licenses/LICENSE-2.0
- *
- *   Unless required by applicable law or agreed to in writing, software
- *   distributed under the License is distributed on an "AS IS" BASIS,
- *   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *   See the License for the specific language governing permissions and
- *   limitations under the License.
- *   
- *   Private Island Top for Darsena / ECP5UM
- *
- */
-
-module top(
-	input  rstn,
-
-	// REFCLK
-	input refclkp_d0, refclkn_d0, 
-	input refclkp_d1, refclkn_d1,
-
-	// SGMII0
-	input	sgmii0_hdinp,
-	input	sgmii0_hdinn,
-	output	sgmii0_hdoutp,
-	output	sgmii0_hdoutn,
-	
-	// SGMII1
-	input	sgmii1_hdinp,
-	input	sgmii1_hdinn,
-	output	sgmii1_hdoutp,
-	output	sgmii1_hdoutn,
-	
-	// SGMII2
-	input	sgmii2_hdinp,
-	input	sgmii2_hdinn,
-	output	sgmii2_hdoutp,
-	output	sgmii2_hdoutn,
-	
-	// SGMII3
-	input	sgmii3_hdinp,
-	input	sgmii3_hdinn,
-	output	sgmii3_hdoutp,
-	output	sgmii3_hdoutn,
-	
-	// PHYs
-	output phy_mdc,
-	
-	output phy0_resetn,
-	inout phy0_mdio,
-	input [1:0] phy0_gpio,
-	input phy0_intn,
-	
-	output phy1_resetn,
-	inout phy1_mdio,
-	input [1:0] phy1_gpio,
-	input phy1_intn,
-
-`ifdef SHIELD_GIGE_SMA
-	output phy2_resetn,
-	output phy2_mdc,
-	inout phy2_mdio,
-`elsif SHIELD_SFP_SMA
-	input 	sfp_tx_fault,		// high indicates a laser fault of some kind.
-	output 	sfp_tx_disable,		// high disables the transmitter
-	input	sfp_pres_n,			// (mod-def 0): grounded by the module to indicate that the module is present)
-	inout	sfp_i2c_sda,		// (mod-def 2)
-	output	sfp_i2c_scl,		// (mod-def 1)
-	input 	sfp_los,			// Low indicates normal operation
-	output	sfp_rate_select,	// high for full bandwidth
-`endif
-	
-	// Microcontroller SPI and bit banging
-	input spi_cs,
-	input spi_clk,
-	output spi_miso,
-	input spi_mosi,
-	output fpga_int,
-	input  fpga_gpio,
-	
-	// I2C
-	inout i2c_scl,
-	inout i2c_sda,
-
-	// K02 UART
-	input uart_txd,
-	output uart_rxd,
-	
-`ifdef DARSENA_V02
-	output fpga_jtag_e,
-	// FTDI UART signals muxed with JTAG
-	input ftdi_tck_txd,
-	output ftdi_tdi_rxd,
-`endif
-
-    output [2:0] led,
-	
-	output ard_sda,
-	output ard_scl,
-	
-`ifdef SHIELD_SFP_SMA
-	output sfp_led1,	// TXD3
-	output sfp_led2,	// RXD3
-	output sfp_led3,	// TXD2
-	output sfp_led4,	// RXD2
-	output sfp_led5,	// TXD1
-	output sfp_led6,	// RXD1
-`endif
-	
-	input   pe0,		// 
-	output  pe1,		// 
-	output  pe3,
-	output  pe4,
-	output  pe5,
-	output  pg5,
-	input  ph3,			// UART RX for SFP Testing
-	output  ph4,		// UART TX for SFP Testing
-	inout [9:0] pa  
-);
-	
-`include "directives.v"
-`include "sgmii_params.v"
-`include "ethernet_params.v"
-
-`ifdef DARSENA_V01
-	wire fb_clk;
-	wire fb_ale;
-	wire fb_oen;
-	wire fb_rwn;
-	wire fb_csn;
-	wire fb_cregs_sel;
-	wire [9:0] fb_ad;
-`endif
-
-/* PARAMS */
-localparam MDIO_ROM_ADDR_SZ = 7;
-
-/* nets and variables */
-
-// clocks
-wire 	clk_slow, clk_1_25, clk_10, clk_20;
-wire 	clk_100;
-wire 	refclko;
-
-// pulses
-wire pulse_10ms, pulse_1_6ms;
-
-// misc resets
-wire [3:0] phy_resetn;	// bit[0] will get pruned out for now
-wire [3:0] mac_reset;
-
-// dcu resets
-wire [1:0] pcs_rst_dual;
-wire [1:0] serdes_rst_dual;
-wire [1:0] tx_serdes_rst;	
-
-// channel resets
-wire [3:0] rx_pcs_rst;
-wire [3:0] rx_serdes_rst;
-wire [3:0] tx_pcs_rst;
-
-// MDIO controller and driver
-wire mdio_cont_work_start, mdio_cont_work_run;
-wire mdio_cont_work_done;
-wire [MDIO_ROM_ADDR_SZ-1:0] mdio_routine_addr;
-wire [1:0] mdio_mux_sel;
-wire mdio_done, mdo_oe;
-wire mdo;
-reg mdi;
-wire [15:0] mdio_wd;
-wire [15:0] mdio_rd;
-wire [4:0] mdio_reg_addr;
-wire mdio_ld, mdio_run;
-wire mdio_rwn;
-wire bin_to_ascii_run;
-
-// MDIO Data block
-wire [MDIO_ROM_ADDR_SZ-1:0] rom_a;
-wire [7:0] rom_d;
-wire [4:0] mdio_reg_addr_set;
-wire [7:0] mdio_w_data_h_set, mdio_w_data_l_set;
-wire [4:0] mdio_page_set;
-
-// I2C
-wire sda_oe, scl_oe, sda_o, scl_o;
-wire i2c_fifo_priority;
-
-// UART
-wire uart_rx_done;
-wire read_fifo_we;
-wire [8:0] fifo_r_d;
-wire [6:0] d_uart_rx;
-
-// bin to ASCII
-wire [15:0] bin_to_ascii_d_in;
-wire [6:0] cont_rd;
-
-// PCS, mac
-wire pcs_pclk;
-wire [1:0] pll_lol;
-wire sgmii_rx_k[0:3], sgmii_tx_k[0:3];
-wire sgmii_tx_disp_correct[0:3];
-wire sgmii_rx_cv_err[0:3], sgmii_rx_disp_err[0:3], sgmii_rx_cdr_lol[0:3];
-wire sgmii_lsm_status[0:3], sgmii_rx_los_low[0:3];
-wire [7:0] rx_data0, rx_data1, rx_data2, rx_data3;
-wire [7:0] tx_data0, tx_data1, tx_data2, tx_data3;
-wire [6:0] read_fifo_d_i;
-wire [3:0] rx_sample;
-wire [3:0] pcs_error;
-
-// ipv4
-wire [3:0] ipv4_pkt_start;
-wire [3:0] ipv4_pkt_complete;
-
-reg cont_fifo_re_m1, cont_fifo_re_m2;
-wire cont_fifo_empty;
-wire i2c_fifo_re, uart_fifo_re;
-wire i2c_cont_we, i2c_cont_done;
-wire i_cont_fifo_re;	
-wire bin_to_ascii_we, mdio_rd_we, cont_rd_we;	
-wire [3:0] phy_up;
-
-// Interrupts
-wire [6:0] int_do;
-wire [3:0] mac_int;
-wire int_sel;
-
-// Common Internal Memory Bus
-wire[10:0] mem_addr;
-wire [8:0] mem_d_i;
-reg [8:0] mem_d_o;
-wire mem_we, mem_oe;
-wire [4:0] mem_do_mux_sel;
-
-// DPRAM
-wire [10:0] param_phy0_addr, param_phy1_addr, param_phy2_addr, param_phy3_addr;
-wire [8:0] param_phy0_din, param_phy1_din, param_phy2_din, param_phy3_din;
-wire [8:0] param_phy0_dout, param_phy1_dout, param_phy2_dout, param_phy3_dout;
-wire param_phy0_ce, param_phy1_ce, param_phy2_ce, param_phy3_ce;
-wire param_phy0_we, param_phy1_we, param_phy2_we, param_phy3_we;
-wire [8:0] param_ram_0_do, param_ram_1_do, param_ram_2_do, param_ram_3_do;
-
-wire [7:0] i2c_d_o;
-wire [8:0] micro_fifo_do;
-wire sys_mem_rx_ce, sys_mem_tx_ce, sys_mem_ptrs_sel;
-wire [3:0] param_sel;
-
-// drop_fifos and filter
-wire rx0_k_m1, rx0_k_m2, rx0_k_m3, rx0_k_m4;
-wire [7:0] rx0_data_m1, rx0_data_m2, rx0_data_m3, rx0_data_m4;
-
-wire rx1_k_m1, rx1_k_m2, rx1_k_m3, rx1_k_m4;
-wire [7:0] rx1_data_m1, rx1_data_m2, rx1_data_m3, rx1_data_m4;
-
-wire rx2_k_m1, rx2_k_m2, rx2_k_m3, rx2_k_m4;
-wire [7:0] rx2_data_m1, rx2_data_m2, rx2_data_m3, rx2_data_m4; 
-
-wire rx3_k_m1, rx3_k_m2, rx3_k_m3, rx3_k_m4;
-wire [7:0] rx3_data_m1, rx3_data_m2, rx3_data_m3, rx3_data_m4; 
-
-wire [3:0] rx_mac_keep;
-wire [3:0] rx_sc_wr_done;
-
-// drop filter outputs
-wire rx_df_fifo_we_01, rx_df_fifo_we_02, rx_df_fifo_we_03;
-wire rx_df_fifo_we_10, rx_df_fifo_we_12, rx_df_fifo_we_13;
-wire rx_df_fifo_we_20, rx_df_fifo_we_21, rx_df_fifo_we_23, rx_df_fifo_we_2u;
-wire rx_df_fifo_we_30, rx_df_fifo_we_31, rx_df_fifo_we_32;
-wire rx_df_fifo_we_u2;
-
-wire [8:0]  rx_df_fifo_d_01, rx_df_fifo_d_02, rx_df_fifo_d_03; 
-wire [8:0]  rx_df_fifo_d_10, rx_df_fifo_d_12, rx_df_fifo_d_13; 
-wire [8:0]  rx_df_fifo_d_20, rx_df_fifo_d_21, rx_df_fifo_d_23, rx_df_fifo_d_2u; 
-wire [8:0]  rx_df_fifo_d_30, rx_df_fifo_d_31, rx_df_fifo_d_32;
-wire [8:0]  rx_df_fifo_d_u2;
-
-// pkt filter
-wire [3:0] trigger;
-wire [3:0] rx_enet_bcast;
-wire [3:0] rx_ipv4_arp;
-wire rx_pf_keep_01;
-wire rx_pf_keep_02;
-wire rx_pf_keep_03;
-wire rx_pf_keep_10;
-wire rx_pf_keep_12;
-wire rx_pf_keep_13;
-wire rx_pf_keep_20;
-wire rx_pf_keep_21;
-wire rx_pf_keep_23;
-wire rx_pf_keep_2u;
-wire rx_pf_keep_30;
-wire rx_pf_keep_31;
-wire rx_pf_keep_32;
-wire rx_pf_keep_u2;
-
-// rx_fifos
-wire [3:0] rx_sc_fifo_we;
-wire rx_sw_fifo_re_01, rx_sw_fifo_re_02, rx_sw_fifo_re_03;
-wire rx_sf_fifo_empty_01, rx_sf_fifo_empty_02, rx_sf_fifo_empty_03;
-wire rx_sw_fifo_re_10, rx_sw_fifo_re_12, rx_sw_fifo_re_13;
-wire rx_sf_fifo_empty_10, rx_sf_fifo_empty_12, rx_sf_fifo_empty_13;
-wire rx_sw_fifo_re_20, rx_sw_fifo_re_21, rx_sw_fifo_re_23, rx_sw_fifo_re_2u;
-wire rx_sf_fifo_empty_20, rx_sf_fifo_empty_21, rx_sf_fifo_empty_23, rx_sf_fifo_empty_2u;
-wire rx_sw_fifo_re_30, rx_sw_fifo_re_31, rx_sw_fifo_re_32;
-wire rx_sf_fifo_empty_30, rx_sf_fifo_empty_31, rx_sf_fifo_empty_32;
-wire rx_sw_fifo_re_u2, rx_uc_fifo_empty_u2;
-wire [8:0] rx_sc_fifo_d0, rx_sc_fifo_d1, rx_sc_fifo_d2, rx_sc_fifo_d3;
-wire [8:0] rx_sf_fifo_d_01, rx_sf_fifo_d_02, rx_sf_fifo_d_03;
-wire [8:0] rx_sf_fifo_d_10, rx_sf_fifo_d_12, rx_sf_fifo_d_13;
-wire [8:0] rx_sf_fifo_d_20, rx_sf_fifo_d_21, rx_sf_fifo_d_23, rx_sf_fifo_d_2u;
-wire [8:0] rx_sf_fifo_d_30, rx_sf_fifo_d_31, rx_sf_fifo_d_32;
-wire [8:0] rx_uc_fifo_d_u2;
-wire rx_sf_almost_full_01, rx_sf_almost_full_02, rx_sf_almost_full_03;
-wire rx_sf_almost_full_10, rx_sf_almost_full_12, rx_sf_almost_full_13;
-wire rx_sf_almost_full_20, rx_sf_almost_full_21, rx_sf_almost_full_23;
-
-
-// between switch and mac
-wire [8:0] tx_sw_fifo_d0, tx_sw_fifo_d1, tx_sw_fifo_d2, tx_sw_fifo_d3, tx_sw_fifo_du;
-wire [3:0] tx_sc_fifo_re;
-wire tx_uc_fifo_re;
-wire [3:0] tx_sw_fifo_empty;
-wire tx_sw_fifo_we;
-
-wire [2:0] tx_sw_mode0, tx_sw_mode1, tx_sw_mode2, tx_sw_mode3;
-wire tx_sw_modeu;
-wire [3:0] tx_sc_done;
-
-// 100 Mbit
-wire[3:0] mode_100Mbit;
-
-// Flexbus
-wire fb_ad_oe;
-wire[9:0] fb_ad_o;
-reg[9:0] fb_d;
-
-wire pkt_filter_sel_01, pkt_filter_sel_02, pkt_filter_sel_03;
-wire pkt_filter_sel_10, pkt_filter_sel_12, pkt_filter_sel_13;
-wire pkt_filter_sel_20, pkt_filter_sel_21, pkt_filter_sel_23, pkt_filter_sel_2u;
-wire pkt_filter_sel_u2;
-
-// FCS
-wire [1:0] fcs_addr0, fcs_addr1, fcs_addr2, fcs_addr3;
-wire [7:0] fcs_din0, fcs_din1, fcs_din2, fcs_din3;
-wire [7:0] fcs_dout0, fcs_dout1, fcs_dout2, fcs_dout3;
-wire[3:0] fcs_init, fcs_enable;
-
-// half FIFO / DPRAM interface for uP
-wire hfifo_we, hfifo_re; 
-wire [8:0] hfifo_tx_d, hfifo_rx_d;
-wire hfifo_empty;
-wire micro_fifo_int;
-wire tx_uc_block;
-	
-// SCI
-wire[1:0] sci_sel_dual;
-wire[3:0] sci_sel_ch;
-wire[7:0] sci_rddata0, sci_rddata1 ;
-wire[1:0] sci_int;
-
-// Metrics
-wire tx_custom, metrics_start;
-wire [8:0] metrics_d;
-
-// Network Debug & Metrics
-reg [3:0] rx_active, tx_active;
-wire [3:0] mac_rx_active;
-wire [3:0] drop_rx0_active, drop_rx1_active, drop_rx2_active, drop_rx3_active;
-wire [3:0] sync_rx0_active, sync_rx1_active, sync_rx2_active, sync_rx3_active;
-wire [3:0] mac_tx_active;
-wire [3:0] rx_sc_error;
-wire [3:0] rx_eop, rx_sop;
-wire [3:0] tx_eop, tx_sop;
-wire [10:0] rx0_byte_cnt, rx1_byte_cnt, rx2_byte_cnt, rx3_byte_cnt;
-wire [10:0] tx0_byte_cnt, tx1_byte_cnt, tx2_byte_cnt, tx3_byte_cnt;
-
-// Debug LEDs
-reg lsm_status, rx_cdr_lol, rx_los_low;
-
-// Misc Debug
-wire ext_sci_int;
-
-/****************************
- * 
- *   Logic Begins Below 
- *   
- ***************************/
-
-/* Lattice requires GSR to be in top-level module and be named GSR_INST */
-GSR GSR_INST(.GSR(rstn));
-PUR PUR_INST(.PUR(1'b1));
-
-assign phy_mdc = clk_10;
-
-assign phy0_resetn = phy_resetn[0];
-assign phy1_resetn = phy_resetn[1];
-
-`ifdef SHIELD_GIGE_SMA
-	assign phy2_resetn = phy_resetn[2];
-	assign phy2_mdc = clk_10;
-`elsif SHIELD_SFP_SMA
-	assign sfp_tx_disable = 1'b0;
-	assign sfp_i2c_scl = 1'b1;
-	assign sfp_rate_select = 1'b1;
-`endif
-
-	
-/* 
- * Clocks derived from the internal OSCG
- */
-clk_gen clk_gen_0(
-	.rstn( rstn ),
-	.clk_10( clk_10 ),
-	.clk_5( ),
-	.clk_2_5( ),	
-	.clk_1_25( clk_1_25 ),
-	.clk_slow( clk_slow )
-);
-
-
-/* 
-*   main controller
-*   
-*   controls worker blocks
-*   interfaces with uC via I2C / UART
-*
-*/      
-controller #(.ADDR_SZ( MDIO_ROM_ADDR_SZ ))controller_0
-(
-	.rstn( rstn ),
-	.clk( clk_10 ),
-	.init(1'b1),
-	.pulse_100ms( 1'b0 ),
-	// PCS status lines
-	.pcs_rx_error( pcs_error ),
-	.pll_lol( pll_lol ),
-	// link status
-	.port_up( phy_up ),
-//	.sfp_los(sfp_los),
-	// mdio_controller interface
-	.mdio_cont_start(mdio_cont_work_start),
-	.mdio_cont_done(mdio_cont_work_done),
-	.mdio_routine_addr( mdio_routine_addr ),
-	.mdio_run( mdio_run ),
-	// mdio_data params
-	.mdio_page( mdio_page_set ),
-	.mdio_reg_addr( mdio_reg_addr_set ),
-	.mdio_w_data_h( mdio_w_data_h_set ),
-	.mdio_w_data_l( mdio_w_data_l_set ),
-	// bin_to_ascii interface
-	.bin_to_ascii_run( bin_to_ascii_run ),
-	// ext_sys_fifo interface: controller to external I/F FIFO
-	.fifo_mux_sel( read_fifo_mux_sel ),
-	.fifo_we( cont_rd_we ),
-	.read_fifo_d_o( cont_rd ),
-	// i2c interface
-	.i2c_rx_we ( i2c_cont_we ),
-	.i2c_rx_done ( i2c_cont_done ),
-	.i2c_d_in( i2c_d_o ),
-	// reset and config
-	.pcs_rst_dual( pcs_rst_dual ),
-	.serdes_rst_dual( serdes_rst_dual ),
-	.tx_serdes_rst( tx_serdes_rst ),
-	.phy_resetn( phy_resetn ),
-	.mac_reset( mac_reset ),
-	.tx_pcs_rst( tx_pcs_rst ),
-	.rx_serdes_rst( rx_serdes_rst ),
-	.rx_pcs_rst( rx_pcs_rst ),
-	.mdio_mux_sel( mdio_mux_sel ),
-	.i2c_fifo_priority( i2c_fifo_priority ),
-	// TX custom packet
-	.tx_metrics( tx_custom )
-
-);
-
-/*
- * Controls the routing of data and transmit modes
- */
-switch switch_0(
-	.rstn( rstn ),
-	.clk( pcs_pclk ),
-	// PHY status
-	.phy_up( phy_up ),
-	.mode_100Mbit ( mode_100Mbit ),
-	// FIFO input data from RX FIFOs
-	.rx_d_01( rx_sf_fifo_d_01 ),
-	.rx_d_02( rx_sf_fifo_d_02 ),
-	.rx_d_03( rx_sf_fifo_d_03 ),
-	.rx_d_10( rx_sf_fifo_d_10 ),
-	.rx_d_12( rx_sf_fifo_d_12 ),
-	.rx_d_13( rx_sf_fifo_d_13 ),
-	.rx_d_20( rx_sf_fifo_d_20 ),
-	.rx_d_21( rx_sf_fifo_d_21 ),
-	.rx_d_23( rx_sf_fifo_d_23 ),
-	.rx_d_2u( rx_sf_fifo_d_2u ),
-	.rx_d_30( rx_sf_fifo_d_30 ),
-	.rx_d_31( rx_sf_fifo_d_31 ),
-	.rx_d_32( rx_sf_fifo_d_32 ),
-	.rx_d_u2( rx_uc_fifo_d_u2 ),
-	// RX FIFO read enables
-	.rx_fifo_re_01( rx_sw_fifo_re_01 ),
-	.rx_fifo_re_02( rx_sw_fifo_re_02 ),
-	.rx_fifo_re_03( rx_sw_fifo_re_03 ),
-	.rx_fifo_re_10( rx_sw_fifo_re_10 ),
-	.rx_fifo_re_12( rx_sw_fifo_re_12 ),
-	.rx_fifo_re_13( rx_sw_fifo_re_13 ),
-	.rx_fifo_re_20( rx_sw_fifo_re_20 ),
-	.rx_fifo_re_21( rx_sw_fifo_re_21 ),
-	.rx_fifo_re_23( rx_sw_fifo_re_23 ),
-	.rx_fifo_re_2u( rx_sw_fifo_re_2u ),
-	.rx_fifo_re_30( rx_sw_fifo_re_30 ),
-	.rx_fifo_re_31( rx_sw_fifo_re_31 ),
-	.rx_fifo_re_32( rx_sw_fifo_re_32 ),
-	.rx_fifo_re_u2( rx_sw_fifo_re_u2 ),
-	// RX FIFO Empty flags
-	.rx_fifo_empty_01( rx_sf_fifo_empty_01 ),
-	.rx_fifo_empty_02( rx_sf_fifo_empty_02 ),
-	.rx_fifo_empty_03( rx_sf_fifo_empty_03 ),
-	.rx_fifo_empty_10( rx_sf_fifo_empty_10 ),
-	.rx_fifo_empty_12( rx_sf_fifo_empty_12 ),
-	.rx_fifo_empty_13( rx_sf_fifo_empty_13 ),
-	.rx_fifo_empty_20( rx_sf_fifo_empty_20 ),
-	.rx_fifo_empty_21( rx_sf_fifo_empty_21 ),
-	.rx_fifo_empty_23( rx_sf_fifo_empty_23 ),
-	.rx_fifo_empty_2u( rx_sf_fifo_empty_2u ),
-	.rx_fifo_empty_30( rx_sf_fifo_empty_30 ),
-	.rx_fifo_empty_31( rx_sf_fifo_empty_31 ),
-	.rx_fifo_empty_32( rx_sf_fifo_empty_32 ),
-	.rx_fifo_empty_u2( rx_uc_fifo_empty_u2 ),
-	// RX Byte Count
-	.rx_wr_done(rx_sc_wr_done),
-	.rx0_byte_cnt(rx0_byte_cnt),
-	.rx1_byte_cnt(rx1_byte_cnt),
-	.rx2_byte_cnt(rx2_byte_cnt),
-	.rx3_byte_cnt(rx3_byte_cnt),
-	// TX FIFO output from internal muxes
-	.tx_d0( tx_sw_fifo_d0),
-	.tx_d1( tx_sw_fifo_d1 ),
-	.tx_d2( tx_sw_fifo_d2 ),
-	.tx_d3( tx_sw_fifo_d3 ),
-	.tx_du( tx_sw_fifo_du ),
-	// TX FIFO read enable inputs (need to route to RX output FIFOs)
-	.tx_fifo_re( tx_sc_fifo_re ),
-	.tx_fifo_we_u ( tx_sw_fifo_we ),
-	// TX FIFO Empty Flags (need to route to RX output FIFOs)
-	.tx_fifo_empty( tx_sw_fifo_empty ),
-	// TX modes for the PHYs and uc
-	.tx_mode0( tx_sw_mode0 ),
-	.tx_mode1( tx_sw_mode1 ),
-	.tx_mode2( tx_sw_mode2 ),
-	.tx_mode3( tx_sw_mode3 ),
-	.tx_modeu( tx_modeu ),
-	// TX byte cnt
-	.tx0_byte_cnt(tx0_byte_cnt),
-	.tx1_byte_cnt(tx1_byte_cnt),
-	.tx2_byte_cnt(tx2_byte_cnt),
-	.tx3_byte_cnt(tx3_byte_cnt),
-	// TX state machine done flag
-	.tx_f( tx_sc_done ),
-	// TX custom packet
-	.tx_custom	( tx_custom )
-);
-
-
-/*
- * RX and TX controller logic tied to PCS/SGMII protocol
- */
-mac mac_0(
-	.rstn( ~mac_reset[0] ),
-	.phy_resetn ( phy_resetn[0] ),
-	.clk( pcs_pclk ),	
-	.tap_port ( 1'b0 ),
-	//  AN
-	.phy_type(2'b00),		// SGMII=0
-	.an_disable( 1'b0 ),
-	.pulse_1_6ms(pulse_1_6ms),
-	.pulse_10ms(pulse_10ms),
-	.fixed_speed(SGMII_SPEED_AN),
-	.an_duplex(  ),
-	.mode_100Mbit( mode_100Mbit[0] ),
-	.phy_up( phy_up[0] ),
-	// Switch I/F
-	.tx_mode( tx_sw_mode0 ),
-	.tx_f( tx_sc_done[0] ),
-	// PCS / SERDES health
-	.rx_lsm( sgmii_lsm_status[0] ),
-	.rx_cv_err ( sgmii_rx_cv_err[0] ),
-	.rx_disp_err( sgmii_rx_disp_err[0] ),
-	.rx_cdr_lol( sgmii_rx_cdr_lol[0] ),
-	.rx_los ( sgmii_rx_los_low[0] ),
-	// PCS data I/F
-	.rx_k( sgmii_rx_k[0] ),
-	.rx_data( rx_data0 ),
-	.tx_k( sgmii_tx_k[0] ),
-	.tx_data( tx_data0 ),
-	.tx_disp_correct( sgmii_tx_disp_correct[0] ),
-	// Flags and Interrupts 
-	.keep( rx_mac_keep[0] ),
-	// TX FCS
-	.fcs_init( fcs_init[0] ),
-	.fcs_enable( fcs_enable[0] ),
-	.fcs_addr( fcs_addr0 ),
-	.fcs_dout( fcs_din0 ),
-	.fcs_din( fcs_dout0 ),
-	// SGMII RX / FIFO Write
-	.rx_fifo_we( rx_sc_fifo_we[0] ),
-	.rx_fifo_d( rx_sc_fifo_d0 ),
-	.rx_error( rx_sc_error[0] ),
-	.rx_wr_done( rx_sc_wr_done[0] ),
-	.rx_byte_cnt(rx0_byte_cnt),
-	// SGMII TX / FIFO Read
-	.tx_byte_cnt_i(tx0_byte_cnt),
-	.tx_fifo_re( tx_sc_fifo_re[0] ),
-	.tx_fifo_d( tx_sw_fifo_d0 ),
-	.tx_fifo_empty( tx_sw_fifo_empty[0] ),
-	// Packet Filter
-	.rx_sample( rx_sample[0] ),
-	.ipv4_pkt_start( ipv4_pkt_start[0] ),
-	.trigger( ),
-	.rx_enet_bcast( rx_enet_bcast[0] ),
-	.rx_ipv4_arp( rx_ipv4_arp[0] ),	
-	.rx_k_m1( rx0_k_m1 ), 
-	.rx_k_m2( rx0_k_m2 ), 
-	.rx_k_m3( rx0_k_m3), 
-	.rx_k_m4( rx0_k_m4 ),
-	.rx_data_m1( rx0_data_m1 ), 
-	.rx_data_m2( rx0_data_m2 ), 
-	.rx_data_m3( rx0_data_m3), 
-	.rx_data_m4( rx0_data_m4 ),
-	// Param RAM
-	.dpr_ad( param_phy0_addr ),
-	.dpr_we( param_phy0_we ),
-	.dpr_ce( param_phy0_ce ),
-	.dpr_di( param_phy0_din ),
-	.dpr_do( param_phy0_dout ),
-	// Metrics and Interrupts
-	.mac_int( mac_int[0] ),
-	.rx_sop( rx_sop[0] ),
-	.rx_eop( rx_eop[0] ),
-	.tx_sop( tx_sop[0] ),
-	.tx_eop( tx_eop[0] ),
-	.metrics_start ( ),
-	.metrics_d ( 9'h0 ),
-	.rx_active( mac_rx_active[0] ),
-	.tx_active( mac_tx_active[0] )
-);
-
-
-ipv4_rx ipv4_rx_0(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),	
-		// control
-		.phy_resetn ( phy_resetn[0] ),
-		.phy_up( phy_up[0] ),
-		// packet data
-		.pkt_start( ipv4_pkt_start[0] ),
-		.rx_eop( rx_eop[0] ),
-		.rx_data_m1( rx0_data_m1 ), 
-		.rx_data_m2( rx0_data_m2 ), 
-		.rx_data_m3( rx0_data_m3), 
-		.rx_data_m4( rx0_data_m4 ),	
-		// flags
-		.pkt_complete(ipv4_pkt_complete[0]),
-		.trigger_src_addr(  ),
-		.trigger_dst_addr( trigger[0] ),
-		.keep(  )
-		);
-
-
-pkt_filter pkt_filter_01(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),
-		// input for programming
-		.sel( pkt_filter_sel_01 ),
-		.we( mem_we ),
-		.addr( mem_addr[3:0] ),
-		.d_in( mem_d_i[7:0] ),
-		// registered data
-		.rx_data_m1( rx0_data_m1 ), 
-		.rx_data_m2( rx0_data_m2 ), 
-		.rx_data_m3( rx0_data_m3), 
-		.rx_data_m4( rx0_data_m4 ),	
-		// filter
-		.new_frame ( rx_sop[0] ),
-		.block( 1'b0 ),
-		.invert( 1'b1 ),
-		.trigger( trigger[0] ),
-		.keep( rx_pf_keep_01 )
-);
-
-drop_fifo drop_fifo_01(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		.enable( 1'b1 ),
-		// control
-		.keep ( rx_pf_keep_01 | rx_mac_keep[0] ),
-		.passthrough( 1'b0 ),
-		// input
-		.we_in( rx_sc_fifo_we[0] ),
-		.wr_done( rx_sc_wr_done[0] ),
-		.d_in( rx_sc_fifo_d0 ),
-		// output
-		.we_out( rx_df_fifo_we_01 ),
-		.d_out( rx_df_fifo_d_01 ),
-		// debug
-		.active( drop_rx0_active[1] )
-);
-	
-sync_fifo sync_fifo_rx_01(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		// input
-		.we ( rx_df_fifo_we_01 & phy_up[1] ),
-		.d_in ( rx_df_fifo_d_01 ),
-		// output
-		.re ( rx_sw_fifo_re_01 ),
-		.d_out( rx_sf_fifo_d_01 ),
-		.empty( rx_sf_fifo_empty_01 ),
-		.almost_full(  ),
-		.reset_ptrs( 1'b0 ),
-		// debug
-		.active( sync_rx0_active[1] )
-);
-	
-pkt_filter pkt_filter_02(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),
-		// input for programming
-		.sel( pkt_filter_sel_02 ),
-		.we( mem_we ),
-		.addr( mem_addr[3:0] ),
-		.d_in( mem_d_i[7:0] ),
-		// registered data
-		.rx_data_m1( rx0_data_m1 ), 
-		.rx_data_m2( rx0_data_m2 ), 
-		.rx_data_m3( rx0_data_m3), 
-		.rx_data_m4( rx0_data_m4 ),	
-		// filter
-		.new_frame ( rx_sop[0] ),
-		.block( rx_sf_almost_full_02 ),
-		.invert(1'b1),
-		.trigger(trigger[0]),
-		.keep( rx_pf_keep_02 )
-);
-
-drop_fifo drop_fifo_02(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		.enable( 1'b1 ),
-		// control
-		.keep ( rx_pf_keep_02 | rx_mac_keep[0] ),
-		.passthrough( 1'b0 ),
-		// input
-		.we_in( rx_sc_fifo_we[0] ),
-		.wr_done( rx_sc_wr_done[0] ),
-		.d_in( rx_sc_fifo_d0 ),
-		// output
-		.we_out( rx_df_fifo_we_02 ),
-		.d_out( rx_df_fifo_d_02 ),
-		.active( drop_rx0_active[2] )
-	);
-
-sync_fifo sync_fifo_rx_02(
-	.rstn( rstn ),
-	.clk ( pcs_pclk ),
-	// input
-	.we ( rx_df_fifo_we_02 & phy_up[2] ),
-	.d_in ( rx_df_fifo_d_02 ),
-	// output
-	.re ( rx_sw_fifo_re_02 ),
-	.d_out( rx_sf_fifo_d_02 ),
-	.empty( rx_sf_fifo_empty_02 ),
-	.almost_full( rx_sf_almost_full_02 ),
-	.reset_ptrs( 1'b0 ),
-	// debug
-	.active(sync_rx0_active[2]  )
-);
-
-
-pkt_filter pkt_filter_03(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),
-		// input for programming
-		.sel( pkt_filter_sel_03 ),
-		.we( mem_we ),
-		.addr( mem_addr[3:0] ),
-		.d_in( mem_d_i[7:0] ),
-		// registered data
-		.rx_data_m1( rx0_data_m1 ), 
-		.rx_data_m2( rx0_data_m2 ), 
-		.rx_data_m3( rx0_data_m3), 
-		.rx_data_m4( rx0_data_m4 ),	
-		// filter
-		.new_frame ( rx_sop[0] ),
-		.block( rx_sf_almost_full_03 ),
-		.invert( 1'b0 ),
-		.trigger( trigger[0] ),
-		.keep( rx_pf_keep_03 )
-	);
-
-drop_fifo drop_fifo_03(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		.enable( 1'b0 ),
-		// control
-		.keep ( rx_pf_keep_03 | rx_mac_keep[0] ),
-		.passthrough( 1'b0 ),
-		// input
-		.we_in( rx_sc_fifo_we[0] ),
-		.wr_done( rx_sc_wr_done[0] ),
-		.d_in( rx_sc_fifo_d0 ),
-		// output
-		.we_out( rx_df_fifo_we_03 ),
-		.d_out( rx_df_fifo_d_03 ),
-		.active( drop_rx0_active[3] )
-	);
-
-sync_fifo sync_fifo_rx_03(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		// input
-		.we ( rx_df_fifo_we_03 & phy_up[3] ),
-		.d_in ( rx_df_fifo_d_03 ),
-		// output
-		.re ( rx_sw_fifo_re_03 ),
-		.d_out( rx_sf_fifo_d_03 ),
-		.empty( rx_sf_fifo_empty_03 ),
-		.almost_full( rx_sf_almost_full_03 ),
-		.reset_ptrs( 1'b0 ),
-		// debug
-		.active( sync_rx0_active[3] )
-	);
-
-fcs fcs_0(
-	.rstn( rstn ),
-	.clk( pcs_pclk ),
-	.init( fcs_init[0] ),
-	.enable( fcs_enable[0] ), 
-	.addr( fcs_addr0 ),
-	.din( fcs_din0 ),
-	.dout( fcs_dout0 )
-);
-
-/*
- * Param RAM
- */
-dpram param_ram_0(
-		.rstn(rstn),
-		.a_clk(clk_10),
-		.a_clk_e(param_sel[0]),
-		.a_we(mem_we),
-		.a_oe(mem_oe),
-		.a_addr(mem_addr),
-		.a_din(mem_d_i[8:0]),
-		.a_dout(param_ram_0_do),
-		// port B
-		.b_clk( pcs_pclk),
-		.b_clk_e(param_phy0_ce),
-		.b_we(param_phy0_we),
-		.b_oe( 1'b1  ),
-		.b_addr( param_phy0_addr ),
-		.b_din( param_phy0_dout ),
-		.b_dout( param_phy0_din )
-	);
-
-mac mac_1(
-	.rstn( ~mac_reset[1] ),
-	.phy_resetn ( phy_resetn[1] ),
-	.clk( pcs_pclk ),
-	.tap_port ( 1'b0 ),
-	// AN
-	.phy_type(2'b00),		// SGMII==0
-	.an_disable( 1'b0 ),
-	.pulse_1_6ms(pulse_1_6ms),
-	.pulse_10ms(pulse_10ms),
-	.fixed_speed(SGMII_SPEED_AN),
-	.an_duplex(  ),
-	.mode_100Mbit( mode_100Mbit[1] ),
-	.phy_up( phy_up[1] ),
-	// Switch I/F
-	.tx_mode( tx_sw_mode1 ),
-	.tx_f( tx_sc_done[1] ),
-	// PCS / SERDES health
-	.rx_lsm( sgmii_lsm_status[1] ),
-	.rx_cv_err ( sgmii_rx_cv_err[1] ),
-	.rx_disp_err( sgmii_rx_disp_err[1] ),
-	.rx_cdr_lol( sgmii_rx_cdr_lol[1] ),
-	.rx_los ( sgmii_rx_los_low[1] ),
-	// PCS data I/F
-	.rx_k( sgmii_rx_k[1] ),
-	.rx_data( rx_data1 ),
-	.tx_k( sgmii_tx_k[1] ),
-	.tx_data( tx_data1 ),
-	.tx_disp_correct( sgmii_tx_disp_correct[1] ),
-	// Flags and Interrupts
-	.keep( rx_mac_keep[1] ),
-	// FCS
-	.fcs_init( fcs_init[1] ),
-	.fcs_enable( fcs_enable[1] ),
-	.fcs_addr( fcs_addr1 ),
-	.fcs_dout( fcs_din1 ),
-	.fcs_din( fcs_dout1 ),
-	// SGMII RX / FIFO Write
-	.rx_fifo_we(  rx_sc_fifo_we[1]  ),
-	.rx_fifo_d( rx_sc_fifo_d1 ),
-	.rx_error( rx_sc_error[1] ),
-	.rx_wr_done( rx_sc_wr_done[1] ),
-	.rx_byte_cnt(rx1_byte_cnt),
-	// SGMII TX / FIFO Read
-	.tx_byte_cnt_i(tx1_byte_cnt),
-	.tx_fifo_re( tx_sc_fifo_re[1] ),
-	.tx_fifo_d( tx_sw_fifo_d1 ),
-	.tx_fifo_empty( tx_sw_fifo_empty[1] ),
-	// Packet Filter
-	.rx_sample( ),
-	.ipv4_pkt_start( ipv4_pkt_start[1] ),
-	.trigger( ),
-	.rx_enet_bcast( rx_enet_bcast[1] ),
-	.rx_ipv4_arp( rx_ipv4_arp[1] ),	
-	.rx_k_m1( rx1_k_m1 ), 
-	.rx_k_m2( rx1_k_m2 ), 
-	.rx_k_m3( rx1_k_m3), 
-	.rx_k_m4( rx1_k_m4 ),
-	.rx_data_m1( rx1_data_m1 ), 
-	.rx_data_m2( rx1_data_m2 ), 
-	.rx_data_m3( rx1_data_m3), 
-	.rx_data_m4( rx1_data_m4 ),
-	// Param RAM
-	.dpr_ad( param_phy1_addr ),
-	.dpr_we( param_phy1_we),
-	.dpr_ce(param_phy1_ce ),
-	.dpr_di(param_phy1_din),
-	.dpr_do(param_phy1_dout),
-	// Metrics  and Interrupts
-	.mac_int( mac_int[1] ),
-	.rx_sop( rx_sop[1] ),
-	.rx_eop( rx_eop[1] ),
-	.tx_sop( tx_sop[1] ),
-	.tx_eop( tx_eop[1] ),
-	.metrics_start ( ),
-	.metrics_d ( 9'h0 ),
-	.rx_active( mac_rx_active[1] ),
-	.tx_active( mac_tx_active[1] )
-);
-
-ipv4_rx ipv4_rx_1(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),	
-		// control
-		.phy_resetn ( phy_resetn[1] ),
-		.phy_up( phy_up[1] ),
-		// packet data
-		.pkt_start( ipv4_pkt_start[1] ),
-		.rx_eop( rx_eop[1] ),
-		.rx_data_m1( rx1_data_m1 ), 
-		.rx_data_m2( rx1_data_m2 ), 
-		.rx_data_m3( rx1_data_m3), 
-		.rx_data_m4( rx1_data_m4 ),	
-		// flags
-		.pkt_complete(ipv4_pkt_complete[1]),
-		.trigger_src_addr(  ),
-		.trigger_dst_addr( trigger[1] ),
-		.keep(  )
-	);
-
-pkt_filter #(.DEPTH(8), .DEPTHW(3), .WIDTH(32)) pkt_filter_10(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),
-		// input for programming
-		.sel( pkt_filter_sel_10 ),
-		.we( mem_we ),
-		.addr( mem_addr[4:0] ),
-		.d_in( mem_d_i[7:0] ),
-		// registered data
-		.rx_data_m1( rx1_data_m1 ), 
-		.rx_data_m2( rx1_data_m2 ), 
-		.rx_data_m3( rx1_data_m3), 
-		.rx_data_m4( rx1_data_m4 ),	
-		// filter
-		.new_frame ( rx_sop[1] ),
-		.block( 1'b0 ),
-		.invert( 1'b1 ),
-		.trigger( trigger[1] ),
-		.keep( rx_pf_keep_10 )
-	);
-
-drop_fifo drop_fifo_10(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		.enable( 1'b1 ),
-		// control
-		.keep ( rx_pf_keep_10 | rx_mac_keep[1] ),
-		.passthrough( 1'b0 ),
-		// input
-		.we_in( rx_sc_fifo_we[1] ),
-		.wr_done( rx_sc_wr_done[1] ),
-		.d_in( rx_sc_fifo_d1 ),
-		// output
-		.we_out( rx_df_fifo_we_10 ),
-		.d_out( rx_df_fifo_d_10 ),
-		// debug
-		.active( drop_rx1_active[0] )
-	);
-	
-sync_fifo sync_fifo_rx_10(
-	.rstn( rstn ),
-	.clk ( pcs_pclk ),
-	// input / RX
-	.we ( rx_df_fifo_we_10 & phy_up[0] ),
-	.d_in ( rx_df_fifo_d_10 ),
-	// output / TX
-	.re ( rx_sw_fifo_re_10 ),
-	.d_out( rx_sf_fifo_d_10 ),
-	.empty( rx_sf_fifo_empty_10 ),
-	.almost_full(  ),
-	.reset_ptrs( 1'b0 ),
-	// debug
-	.active( sync_rx1_active[0] )
-);
-
-pkt_filter pkt_filter_12(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),
-		// input for programming
-		.sel( pkt_filter_sel_12 ),
-		.we( mem_we ),
-		.addr( mem_addr[3:0] ),
-		.d_in( mem_d_i[7:0] ),
-		// registered data
-		.rx_data_m1( rx1_data_m1 ), 
-		.rx_data_m2( rx1_data_m2 ), 
-		.rx_data_m3( rx1_data_m3), 
-		.rx_data_m4( rx1_data_m4 ),	
-		// filter
-		.new_frame ( rx_sop[1] ),
-		.block( rx_sf_almost_full_12 ),
-		.invert( 1'b1 ),
-		.trigger( trigger[1] ),
-		.keep( rx_pf_keep_12 )
-	);
-	
-drop_fifo drop_fifo_12(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		.enable(1'b1),
-		// control
-		.keep ( rx_pf_keep_12 | rx_mac_keep[1] ),
-		.passthrough( 1'b0 ),
-		// input
-		.we_in( rx_sc_fifo_we[1] ),
-		.wr_done( rx_sc_wr_done[1] ),
-		.d_in( rx_sc_fifo_d1 ),
-		// output
-		.we_out( rx_df_fifo_we_12 ),
-		.d_out( rx_df_fifo_d_12 ),
-		// debug
-		.active( drop_rx1_active[2] )
-	);
-
-sync_fifo sync_fifo_rx_12(
-	.rstn( rstn ),
-	.clk ( pcs_pclk ),
-	// input / RX
-	.we ( rx_df_fifo_we_12 & phy_up[2] ),
-	.d_in ( rx_df_fifo_d_12 ),
-	// output / TX
-	.re ( rx_sw_fifo_re_12 ),
-	.d_out( rx_sf_fifo_d_12 ),
-	.empty( rx_sf_fifo_empty_12 ),
-	.almost_full( rx_sf_almost_full_12 ),
-	.reset_ptrs( 1'b0 ),
-	// debug
-	.active( sync_rx1_active[2] )
-);
-
-pkt_filter pkt_filter_13(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),
-		// input for programming
-		.sel( pkt_filter_sel_13 ),
-		.we( mem_we ),
-		.addr( mem_addr[3:0] ),
-		.d_in( mem_d_i[7:0] ),
-		// registered data
-		.rx_data_m1( rx1_data_m1 ), 
-		.rx_data_m2( rx1_data_m2 ), 
-		.rx_data_m3( rx1_data_m3), 
-		.rx_data_m4( rx1_data_m4 ),	
-		// filter
-		.new_frame ( rx_sop[1] ),
-		.block( 1'b0 ),
-		.invert( 1'b0 ),
-		.trigger( trigger[1] ),
-		.keep( rx_pf_keep_13 )
-	);
-
-drop_fifo drop_fifo_13(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		.enable( 1'b0 ),
-		// control
-		.keep ( rx_pf_keep_13 | rx_mac_keep[1] ),
-		.passthrough( 1'b0 ),
-		// input
-		.we_in( rx_sc_fifo_we[1] ),
-		.wr_done( rx_sc_wr_done[1] ),
-		.d_in( rx_sc_fifo_d1 ),
-		// output
-		.we_out( rx_df_fifo_we_13 ),
-		.d_out( rx_df_fifo_d_13 ),
-		// debug
-		.active( drop_rx1_active[3] )
-	);
-	
-sync_fifo sync_fifo_rx_13(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		// input / RX
-		.we ( rx_df_fifo_we_13 & phy_up[3] ),
-		.d_in ( rx_df_fifo_d_13 ),
-		// output / TX
-		.re ( rx_sw_fifo_re_13 ),
-		.d_out( rx_sf_fifo_d_13 ),
-		.empty( rx_sf_fifo_empty_13 ),
-		.almost_full(  ),
-		.reset_ptrs( 1'b0 ),
-		// debug
-		.active( sync_rx1_active[3] )
-	);
-
-fcs fcs_1(
-	.rstn( rstn ),
-	.clk( pcs_pclk ),
-	.init( fcs_init[1] ),
-	.enable( fcs_enable[1] ), 
-	.addr( fcs_addr1 ),
-	.din( fcs_din1 ),
-	.dout( fcs_dout1 )
-);
-
-/*
- * Param RAM
- */
-dpram param_ram_1(
-		.rstn(rstn),
-		.a_clk(clk_10),
-		.a_clk_e(param_sel[0]),
-		.a_we(mem_we),
-		.a_oe(mem_oe),
-		.a_addr(mem_addr),
-		.a_din(mem_d_i[8:0]),
-		.a_dout(param_ram_1_do),
-		// port B
-		.b_clk( pcs_pclk),
-		.b_clk_e(param_phy1_ce),
-		.b_we(param_phy1_we),
-		.b_oe( 1'b1  ),
-		.b_addr( param_phy1_addr ),
-		.b_din( param_phy1_dout ),
-		.b_dout( param_phy1_din )
-	);
-
-
-metrics metrics_2(
-	.rstn( rstn ),
-	.clk( pcs_pclk ),
-	.mode_100Mbit( mode_100Mbit[2] ),
-	// input data for gathering metrics
-	.rx_mac_keep( rx_mac_keep ),
-	.rx_pf_keep_01( rx_pf_keep_01 ),
-	.rx_pf_keep_02( rx_pf_keep_02 ),
-	.rx_pf_keep_10( rx_pf_keep_10 ),
-	.rx_pf_keep_12( rx_pf_keep_12 ),
-	.rx_pf_keep_20( rx_pf_keep_20 ),
-	.rx_pf_keep_21( rx_pf_keep_21 ),
-	.rx_pf_keep_23( rx_pf_keep_23 ),
-	
-	.rx_sop( rx_sop ),
-	.rx_eop( rx_eop ),
-	.tx_sop( tx_sop ),
-	.tx_eop( tx_eop ),
-	// metric outputs
-	.metrics_start ( metrics_start ),
-	.metrics_d( metrics_d )
-);
-
-
-// GEODSS MAC
-mac mac_2(
-	.rstn(~mac_reset[2]),
-	.phy_resetn ( phy_resetn[2] ),
-	.clk( pcs_pclk ),
-	.tap_port ( 1'b0 ),
-	// SGMII AN
-	.phy_type(2'b01),		// SX==1
-	.an_disable( 1'b1 ),
-	.pulse_1_6ms(pulse_1_6ms),
-	.pulse_10ms(pulse_10ms),
-	.fixed_speed(SGMII_SPEED_1GBIT),
-	.an_duplex(  ),
-	.mode_100Mbit( mode_100Mbit[2] ),
-	.phy_up( phy_up[2] ),
-	// Switch I/F	
-	.tx_mode( tx_sw_mode2 ),
-	.tx_f( tx_sc_done[2] ),
-	// PCS / SERDES health
-	.rx_lsm( 1'b1 ),	// TODO: Fix LSM for SFP
-	.rx_cv_err ( sgmii_rx_cv_err[2] ),
-	.rx_disp_err( sgmii_rx_disp_err[2] ),
-	.rx_cdr_lol( sgmii_rx_cdr_lol[2] ),
-	.rx_los ( sgmii_rx_los_low[2] ),
-	// PCS data I/F
-	.rx_k( sgmii_rx_k[2] ),
-	.rx_data( rx_data2 ),
-	.tx_k( sgmii_tx_k[2] ),
-	.tx_data( tx_data2 ),
-	.tx_disp_correct( sgmii_tx_disp_correct[2] ),
-	// Flags and Interrupts
-	.keep( rx_mac_keep[2] ),
-	// FCS
-	.fcs_init( fcs_init[2] ),
-	.fcs_enable( fcs_enable[2] ),
-	.fcs_addr( fcs_addr2 ),
-	.fcs_dout( fcs_din2 ),
-	.fcs_din( fcs_dout2 ),
-	// SGMII RX / FIFO Write
-	.rx_fifo_we( rx_sc_fifo_we[2] ),
-	.rx_fifo_d(rx_sc_fifo_d2),
-	.rx_error( rx_sc_error[2] ),
-	.rx_wr_done( rx_sc_wr_done[2] ),
-	.rx_byte_cnt(rx2_byte_cnt),
-	// SGMII TX / FIFO Read
-	.tx_byte_cnt_i(tx2_byte_cnt),
-	.tx_fifo_re( tx_sc_fifo_re[2] ),
-	.tx_fifo_d( tx_sw_fifo_d2 ),
-	.tx_fifo_empty( tx_sw_fifo_empty[2]),
-	// Packet Filter
- 	.rx_sample( ),
-	.ipv4_pkt_start( ipv4_pkt_start[2] ),
-	.trigger( ),
-	.rx_enet_bcast( rx_enet_bcast[2] ),
-	.rx_ipv4_arp( rx_ipv4_arp[2] ),	
-	.rx_k_m1( rx2_k_m1 ), 
-	.rx_k_m2( rx2_k_m2 ), 
-	.rx_k_m3( rx2_k_m3), 
-	.rx_k_m4( rx2_k_m4 ),
-	.rx_data_m1( rx2_data_m1 ), 
-	.rx_data_m2( rx2_data_m2 ), 
-	.rx_data_m3( rx2_data_m3), 
-	.rx_data_m4( rx2_data_m4 ),
-	// Param RAM
-	.dpr_ad( param_phy2_addr ),
-	.dpr_we( param_phy2_we ),
-	.dpr_ce( param_phy2_ce ),
-	.dpr_di( param_phy2_din ),
-	.dpr_do( param_phy2_dout ),
-	// Metrics and Interrupts
-	.mac_int( mac_int[2] ), 
-	.rx_sop( rx_sop[2] ),
-	.rx_eop( rx_eop[2] ),
-	.tx_sop( tx_sop[2] ),
-	.tx_eop( tx_eop[2] ),
-	.metrics_start ( metrics_start ),
-	.metrics_d( metrics_d ),
-	// Debug
-	.rx_active( mac_rx_active[2] ),
-	.tx_active( mac_tx_active[2] )
-);
-
-ipv4_rx ipv4_rx_2(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),	
-		// control
-		.phy_resetn ( phy_resetn[2] ),
-		.phy_up( phy_up[2] ),
-		// packet data
-		.pkt_start( ipv4_pkt_start[2] ),
-		.rx_eop( rx_eop[2] ),
-		.rx_data_m1( rx2_data_m1 ), 
-		.rx_data_m2( rx2_data_m2 ), 
-		.rx_data_m3( rx2_data_m3), 
-		.rx_data_m4( rx2_data_m4 ),	
-		// flags
-		.pkt_complete(ipv4_pkt_complete[2]),
-		.trigger_src_addr(  ),
-		.trigger_dst_addr( trigger[2] ),
-		.keep(  )
-	);
-
-
-pkt_filter pkt_filter_20(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),
-		// input for programming
-		.sel( pkt_filter_sel_20 ),
-		.we( mem_we ),
-		.addr( mem_addr[3:0] ),
-		.d_in( mem_d_i[7:0] ),
-		// registered data
-		.rx_data_m1( rx2_data_m1 ), 
-		.rx_data_m2( rx2_data_m2 ), 
-		.rx_data_m3( rx2_data_m3), 
-		.rx_data_m4( rx2_data_m4 ),	
-		// filter
-		.new_frame ( rx_sop[2] ),
-		.block( rx_sf_almost_full_20 ),
-		.invert( 1'b0 ),
-		.trigger( trigger[2] ),
-		.keep( rx_pf_keep_20 )
-);
-
-drop_fifo drop_fifo_20(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		.enable( 1'b0 ),
-		// control
-		.keep ( rx_pf_keep_20 | rx_mac_keep[2] ),
-		.passthrough( 1'b0 ),
-		// input
-		.we_in( rx_sc_fifo_we[2] ),
-		.wr_done( rx_sc_wr_done[2] ),
-		.d_in( rx_sc_fifo_d2 ),
-		// output
-		.we_out( rx_df_fifo_we_20 ),
-		.d_out( rx_df_fifo_d_20 ),
-		// debug
-		.active( drop_rx2_active[0] )
-	);
-
-sync_fifo sync_fifo_rx_20(
-	.rstn( rstn ),
-	.clk ( pcs_pclk ),
-	// input / RX
-	.we ( rx_df_fifo_we_20 & phy_up[0]),
-	.d_in ( rx_df_fifo_d_20 ),
-	// output / TX
-	.re ( rx_sw_fifo_re_20 ),
-	.d_out( rx_sf_fifo_d_20 ),
-	.empty( rx_sf_fifo_empty_20 ),
-	.almost_full( rx_sf_almost_full_20 ),
-	.reset_ptrs( 1'b0 ),
-	// debug
-	.active( sync_rx2_active[0] )
-);
-
-pkt_filter pkt_filter_21(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),
-		// input for programming
-		.sel( pkt_filter_sel_21 ),
-		.we( mem_we ),
-		.addr( mem_addr[3:0] ),
-		.d_in( mem_d_i[7:0] ),
-		// registered data
-		.rx_data_m1( rx2_data_m1 ), 
-		.rx_data_m2( rx2_data_m2 ), 
-		.rx_data_m3( rx2_data_m3), 
-		.rx_data_m4( rx2_data_m4 ),	
-		// filter
-		.new_frame ( rx_sop[2] ),
-		.block( 1'b0 ),
-		.invert( 1'b0 ),
-		.trigger( trigger[2] ),
-		.keep( rx_pf_keep_21 )
-);
-	
-drop_fifo drop_fifo_21(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		.enable( 1'b0 ),
-		// control
-		.keep ( rx_pf_keep_21 | rx_mac_keep[2] ),
-		.passthrough( 1'b0 ),
-		// input
-		.we_in( rx_sc_fifo_we[2] ),
-		.wr_done( rx_sc_wr_done[2] ),
-		.d_in( rx_sc_fifo_d2 ),
-		// output
-		.we_out( rx_df_fifo_we_21 ),
-		.d_out( rx_df_fifo_d_21 ),
-		// debug
-		.active( drop_rx2_active[1] )
-	);
-
-sync_fifo sync_fifo_rx_21(
-	.rstn( rstn ),
-	.clk ( pcs_pclk ),
-	// input / RX
-	.we ( rx_df_fifo_we_21 & phy_up[1] ),
-	.d_in ( rx_df_fifo_d_21 ),
-	// output
-	.re ( rx_sw_fifo_re_21 ),
-	.d_out( rx_sf_fifo_d_21 ),
-	.empty( rx_sf_fifo_empty_21 ),
-	.almost_full(  ),
-	.reset_ptrs( 1'b0 ),
-	// debug
-	.active( sync_rx2_active[1] )
-);
-
-pkt_filter pkt_filter_2u(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),
-		// input for programming
-		.sel( pkt_filter_sel_2u ),
-		.we( mem_we ),
-		.addr( mem_addr[3:0] ),
-		.d_in( mem_d_i[7:0] ),
-		// registered data
-		.rx_data_m1( rx2_data_m1 ), 
-		.rx_data_m2( rx2_data_m2 ), 
-		.rx_data_m3( rx2_data_m3), 
-		.rx_data_m4( rx2_data_m4 ),	
-		// filter
-		.new_frame ( rx_sop[2] ),
-		.block( tx_uc_block ),
-		.invert( 1'b0 ),
-		.trigger( trigger[2] ),
-		.keep( rx_pf_keep_2u )
-	);
-
-drop_fifo drop_fifo_2u(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		.enable( 1'b0 ),
-		// control
-		.passthrough( 1'b0 ),
-		.keep ( rx_pf_keep_2u | rx_mac_keep[2] ),
-		// input
-		.we_in( rx_sc_fifo_we[2] ),
-		.wr_done( rx_sc_wr_done[2] ),
-		.d_in( rx_sc_fifo_d2 ),
-		// output
-		.we_out( rx_df_fifo_we_2u ), 
-		.d_out( rx_df_fifo_d_2u ),
-		// debug
-		.active( )
-	);
-
-// TODO: add a flag on we to keep UC from being overwritten
-sync_fifo sync_fifo_rx_2u(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		// input / RX
-		.we ( rx_df_fifo_we_2u ),
-		.d_in ( rx_df_fifo_d_2u ),
-		// output
-		.re ( rx_sw_fifo_re_2u ),
-		.d_out( rx_sf_fifo_d_2u ),
-		.empty( rx_sf_fifo_empty_2u ),
-		.almost_full(  ),
-		.reset_ptrs( 1'b0 ),
-		// debug
-		.active(  )
-);
-
-fcs fcs_2(
-	.rstn( rstn ),
-	.clk( pcs_pclk ),
-	.init( fcs_init[2] ),
-	.enable( fcs_enable[2] ), 
-	.addr( fcs_addr2 ),
-	.din( fcs_din2 ),
-	.dout( fcs_dout2 )
-);
-
-// GEODSS SMA (MAC is bypassed)
-mac mac_3(
-		.rstn( ~mac_reset[3] & ~sgmii_rx_los_low[3] ),
-		.phy_resetn ( phy_resetn[3] ),
-		.clk( pcs_pclk ),	
-		.tap_port ( 1'b0 ),
-		// SGMII AN
-		.phy_type(2'b11),		// SMA=3
-		.an_disable(1'b1),
-		.pulse_1_6ms(pulse_1_6ms),
-		.pulse_10ms(pulse_10ms),
-		.fixed_speed(SGMII_SPEED_1GBIT),
-		.an_duplex(  ),
-		.mode_100Mbit( mode_100Mbit[3] ),
-		.phy_up( phy_up[3] ),
-		// Switch I/F
-		.tx_mode( tx_sw_mode3 ),
-		.tx_f( tx_sc_done[3] ),
-		// PCS / SERDES health
-		.rx_lsm( sgmii_lsm_status[3] ),
-		.rx_cv_err ( sgmii_rx_cv_err[3] ),
-		.rx_disp_err( sgmii_rx_disp_err[3] ),
-		.rx_cdr_lol( sgmii_rx_cdr_lol[3] ),
-		.rx_los ( sgmii_rx_los_low[3] ),
-		// PCS data I/F
-		.rx_k( sgmii_rx_k[3] ),
-		.rx_data( rx_data3 ),
-		.tx_k( sgmii_tx_k[3] ),
-		.tx_data( tx_data3 ),
-		.tx_disp_correct( sgmii_tx_disp_correct[3] ),
-		// Flags and Interrupts 
-		.keep( rx_mac_keep[3] ),
-		// TX FCS
-		.fcs_init( fcs_init[3] ),
-		.fcs_enable( fcs_enable[3] ),
-		.fcs_addr( fcs_addr3 ),
-		.fcs_dout( fcs_din3 ),
-		.fcs_din( fcs_dout3 ),
-		// SGMII RX / FIFO Write
-		.rx_fifo_we( rx_sc_fifo_we[3] ),
-		.rx_fifo_d( rx_sc_fifo_d3 ),
-		.rx_error( rx_sc_error[3] ),
-		.rx_wr_done( rx_sc_wr_done[3] ),
-		.rx_byte_cnt(rx3_byte_cnt),
-		// SGMII TX / FIFO Read
-		.tx_byte_cnt_i(tx3_byte_cnt),
-		.tx_fifo_re( tx_sc_fifo_re[3] ),
-		.tx_fifo_d( tx_sw_fifo_d3 ),
-		.tx_fifo_empty( tx_sw_fifo_empty[3] ),
-		// Packet Filter
-		.rx_sample( rx_sample[3] ),
-		.ipv4_pkt_start( ipv4_pkt_start[3] ),
-		.trigger( ),
-		.rx_enet_bcast( rx_enet_bcast[3] ),
-		.rx_ipv4_arp( rx_ipv4_arp[3] ),	
-		.rx_k_m1( rx3_k_m1 ), 
-		.rx_k_m2( rx3_k_m2 ), 
-		.rx_k_m3( rx3_k_m3), 
-		.rx_k_m4( rx3_k_m4 ),
-		.rx_data_m1( rx3_data_m1 ), 
-		.rx_data_m2( rx3_data_m2 ), 
-		.rx_data_m3( rx3_data_m3), 
-		.rx_data_m4( rx3_data_m4 ),
-		// Param RAM
-		.dpr_ad( ),
-		.dpr_we( ),
-		.dpr_ce( ),
-		.dpr_di( 9'h0),
-		.dpr_do( ),
-		// Metrics  and Interrupts
-		.mac_int( mac_int[3] ),
-		.rx_sop( rx_sop[3] ),
-		.rx_eop( rx_eop[3] ),
-		.tx_sop( tx_sop[3] ),
-		.tx_eop( tx_eop[3] ),
-		.metrics_start ( ),
-		.metrics_d ( 9'h0 ),
-		// Debug
-		.rx_active( mac_rx_active[3] ),
-		.tx_active( mac_tx_active[3] )
-
-	);
-
-
-ipv4_rx ipv4_rx_3(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),	
-		// control
-		.phy_resetn ( phy_resetn[3] ),
-		.phy_up( phy_up[3] ),
-		// packet data
-		.pkt_start( ipv4_pkt_start[3] ),
-		.rx_eop( rx_eop[3] ),
-		.rx_data_m1( rx3_data_m1 ), 
-		.rx_data_m2( rx3_data_m2 ), 
-		.rx_data_m3( rx3_data_m3), 
-		.rx_data_m4( rx3_data_m4 ),	
-		// flags
-		.pkt_complete(ipv4_pkt_complete[3]),
-		.trigger_src_addr(  ),
-		.trigger_dst_addr( trigger[3] ),
-		.keep(  )
-	);
-	
-
-
-pkt_filter pkt_filter_30(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),
-		// input for programming
-		.sel( pkt_filter_sel_30 ),
-		.we( mem_we ),
-		.addr( mem_addr[3:0] ),
-		.d_in( mem_d_i[7:0] ),
-		// registered data
-		.rx_data_m1( rx3_data_m1 ), 
-		.rx_data_m2( rx3_data_m2 ), 
-		.rx_data_m3( rx3_data_m3), 
-		.rx_data_m4( rx3_data_m4 ),	
-		// filter
-		.new_frame ( rx_sop[3] ),
-		.block( 1'b0 ),
-		.invert( 1'b0 ),
-		.trigger( trigger[3] ),
-		.keep( rx_pf_keep_30 )
-	);
-
-drop_fifo drop_fifo_30(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		.enable( 1'b0 ),
-		// control
-		.keep ( rx_pf_keep_30 | rx_mac_keep[3] ),
-		.passthrough( 1'b0 ),
-		// input
-		.we_in( rx_sc_fifo_we[3] ),
-		.wr_done( rx_sc_wr_done[3] ),
-		.d_in( rx_sc_fifo_d3 ),
-		// output
-		.we_out( rx_df_fifo_we_30 ),
-		.d_out( rx_df_fifo_d_30 ),
-		// debug
-		.active( drop_rx3_active[0] )
-	);
-	
-sync_fifo sync_fifo_rx_30(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		// input
-		.we ( rx_df_fifo_we_30 & phy_up[0] ),
-		.d_in ( rx_df_fifo_d_30 ),
-		// output
-		.re ( rx_sw_fifo_re_30 ),
-		.d_out( rx_sf_fifo_d_30 ),
-		.empty( rx_sf_fifo_empty_30 ),
-		.almost_full(  ),
-		.reset_ptrs( 1'b0 ),
-		// debug
-		.active( sync_rx3_active[0] )
-	);
-	
-pkt_filter pkt_filter_31(
-		.rstn( rstn ),
-		.clk( pcs_pclk ),
-		// input for programming
-		.sel( pkt_filter_sel_31 ),
-		.we( mem_we ),
-		.addr( mem_addr[3:0] ),
-		.d_in( mem_d_i[7:0] ),
-		// registered data
-		.rx_data_m1( rx3_data_m1 ), 
-		.rx_data_m2( rx3_data_m2 ), 
-		.rx_data_m3( rx3_data_m3), 
-		.rx_data_m4( rx3_data_m4 ),	
-		// filter
-		.new_frame ( rx_sop[3] ),
-		.block( 1'b0 ),
-		.invert( 1'b0 ),
-		.trigger( trigger[3] ),
-		.keep( rx_pf_keep_31 )
-	);
-
-drop_fifo drop_fifo_31(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		.enable( 1'b0 ),
-		// control
-		.keep ( rx_pf_keep_31 | rx_mac_keep[3] ),
-		.passthrough( 1'b0 ),
-		// input
-		.we_in( rx_sc_fifo_we[3] ),
-		.wr_done( rx_sc_wr_done[3] ),
-		.d_in( rx_sc_fifo_d3 ),
-		// output
-		.we_out( rx_df_fifo_we_31 ),
-		.d_out( rx_df_fifo_d_31 ),
-		// debug
-		.active( drop_rx3_active[1] )
-	);
-	
-sync_fifo sync_fifo_rx_31(
-		.rstn( rstn ),
-		.clk ( pcs_pclk ),
-		// input
-		.we ( rx_df_fifo_we_31 & phy_up[1] ),
-		.d_in ( rx_df_fifo_d_31 ),
-		// output
-		.re ( rx_sw_fifo_re_31 ),
-		.d_out( rx_sf_fifo_d_31 ),
-		.empty( rx_sf_fifo_empty_31 ),
-		.almost_full(  ),
-		.reset_ptrs( 1'b0 ),
-		// debug
-		.active( sync_rx3_active[1] )
-	);
-	
-fcs fcs_3(
-	.rstn( rstn ),
-	.clk( pcs_pclk ),
-	.init( fcs_init[3] ),
-	.enable( fcs_enable[3] ), 
-	.addr( fcs_addr3 ),
-	.din( fcs_din3 ),
-	.dout( fcs_dout3 )
-);
-
-/* 
- * uCont i/f FIFO 
- * FIFO side connects to network switch
- * RX: processor writes (data into switch)
- * TX: processor reads (data from switch)
- */
-half_fifo  #(.DPRAM_DEPTH(9)) micro_fifo_0 (
-		.rstn(  rstn  ),
-		.uc_clk(clk_10),
-		.fifo_clk(pcs_pclk),
-		// UC interrupt support
-		.fifo_we_int ( micro_fifo_int ),
-		// TX mode
-		.tx_mode(tx_sw_modeu),
-		// DPRAM common
-		.dpram_addr( mem_addr[8:0] ),
-		.dpram_din( mem_d_i[8:0] ), 
-		.dpram_dout( micro_fifo_do ),
-		.dpram_we( mem_we ),
-		.dpram_oe( mem_oe ),
-		// UC select signals
-		.dpram_ptrs_sel( dpram_ptrs_sel ),
-		.dpram_rx_sel( dpram_rx_sel ),
-		.dpram_tx_sel( dpram_tx_sel ),
-		// FIFO TX (input)
-		.fifo_we( tx_sw_fifo_we ),
-		.fifo_d_in( tx_sw_fifo_du ),
-		// FIFO RX (output)
-		.fifo_re( rx_sw_fifo_re_u2 ),
-		.fifo_d_out( rx_uc_fifo_d_u2 ),
-		// FIFO flags
-		.rx_empty( rx_uc_fifo_empty_u2 ),
-		.tx_full ( tx_uc_block )
-	);
-
-/*
- * Param RAM
- */
-dpram param_ram_2(
-        .rstn(rstn),
-        .a_clk(clk_10),
-        .a_clk_e(param_sel[2]),
-        .a_we(mem_we),
-        .a_oe(mem_oe),
-        .a_addr(mem_addr),
-        .a_din(mem_d_i[8:0]),
-        .a_dout(param_ram_2_do),
-        // port B
-        .b_clk( pcs_pclk),
-        .b_clk_e(param_phy2_ce),
-        .b_we(param_phy2_we),
-        .b_oe( 1'b1  ),
-        .b_addr( param_phy2_addr ),
-        .b_din( param_phy2_dout ),
-        .b_dout( param_phy2_din )
-);
-
-//defparam param_ram_2.dp16kd_inst.INITVAL_00 = "00000000000000000000000000000000000000000000000000000000000000000022E10069F00800";
-											        
-
-
-/* 
-*	PCS Notes:
-*	All _c control signals are asynch in the SERDES/PCS
-*	All _s control signals are asynch and should be clocked before being used
-*	TxPLL provides system clock for FPGA logic
-* 	tx_full_clk uses wire name 'txclk' and feeds both txi_clk and rxi_clk, as shown in Figure 9-27
-*	For SGMII, tx_pclk is fed back internally to rxi_clk and ebrd_clk
-*	ebrd_clk: CTC FIFO Read Clock per Channel
-*
-*/
-
-assign ext_sci_int = sci_int[0];
-
-/*
-PCSCLKDIV pcsclkdiv0 (
-	.RST( ~rstn ),
-	.CLKI( refclko ),
-	.SEL2( 1'b1 ), 	// 101 is div by 8
-	.SEL1( 1'b0 ),
-	.SEL0( 1'b1 ),
-	.CDIV1( ),
-	.CDIVX( )
-);
-*/
- 
-/* 
- * PCS block that encapsulates two DCUs and the SCI block 
- */
- assign pcs_error[0] = sgmii_rx_cv_err[0] | sgmii_rx_cdr_lol[0] | !sgmii_lsm_status[0] | sgmii_rx_los_low[0];
- assign pcs_error[1] = sgmii_rx_cv_err[1] | sgmii_rx_cdr_lol[1] | !sgmii_lsm_status[1] | sgmii_rx_los_low[1];
- assign pcs_error[2] = sgmii_rx_cv_err[2] | sgmii_rx_cdr_lol[2] | sgmii_rx_los_low[2];
- assign pcs_error[3] = sgmii_rx_cv_err[3] | sgmii_rx_cdr_lol[3] | sgmii_rx_los_low[3];
- 
-pcs pcs_0 (
-
-	.refclk0_refclkn(refclkp_d0), 
-	.refclk0_refclkp(refclkn_d0), 
-	.refclk0_refclko( refclko ),
-
-	// cross DCU tie offs
-	.sgmii0_cyawstn( 1'b0 ),
-
-	//DCU0 CH0 to PHY0
-    .sgmii0_hdinn(sgmii0_hdinn), 
-	.sgmii0_hdinp(sgmii0_hdinp), 
-	.sgmii0_hdoutn(sgmii0_hdoutn), 
-	.sgmii0_hdoutp(sgmii0_hdoutp), 
-	
-	// DCU resets
-	.sgmii0_tx_serdes_rst_c( tx_serdes_rst[0] ),			// rset LOL signal in PLL TODO: change this
-	.sgmii0_rst_dual_c( pcs_rst_dual[0] ), 					// resets all serdes channels including aux and PCS
-	.sgmii0_serdes_rst_dual_c( serdes_rst_dual[0] ),		// resets serdes dual gated by fpga_reset_enable
-	
-	// channel resets
-	.sgmii0_rx_pcs_rst_c( rx_pcs_rst[0] ),			// reset channel PCS logic
-	.sgmii0_rx_serdes_rst_c( rx_serdes_rst[0] ),	// reset digital logic in serdes rx
-	.sgmii0_tx_pcs_rst_c( tx_pcs_rst[0] ),			// reset channel PCS logic
-	
-	.sgmii0_rx_pwrup_c(1'b1),			// channel power up
-	.sgmii0_tx_pwrup_c(1'b1), 			// channel power up
-	
-	/* tx_pclk: Transmit Primary Clock. Direct connection to Primary
-	 * clock network. When gearing is not enabled, this output
-	 * equals the transmit full rate clock. When 2:1 gearing
-	 * is enabled, it is a divide-by-2 half-rate clock.    
-	 */
-	.sgmii0_tx_pclk( pcs_pclk ),	// direct connection from primary clock network
-	.sgmii0_txi_clk( pcs_pclk ),	// clocks the TX UI FIFOS (see Figure 27)
-	
-    .sgmii0_tx_disp_correct(sgmii_tx_disp_correct[0]), 	
-    .sgmii0_tx_k(sgmii_tx_k[0]), 
-	.sgmii0_txdata( tx_data0 ), 
-	.sgmii0_xmit(1'b0), 						//TODO: Auto Neg state machine	
-    .sgmii0_signal_detect_c(1'b1),	
-	.sgmii0_rx_cv_err( sgmii_rx_cv_err[0] ),	// code violation with associated data, PCS will drive 0xEE and K=1 (Table 9-4)
-    .sgmii0_rx_disp_err( sgmii_rx_disp_err[0] ), 
-	.sgmii0_rx_k( sgmii_rx_k[0] ), 
-	.sgmii0_rxdata( rx_data0 ), 
-    .sgmii0_lsm_status_s( sgmii_lsm_status[0] ), 	// lane is synced with commas ( 0 means no commas detected )  
-    .sgmii0_rx_cdr_lol_s( sgmii_rx_cdr_lol[0] ), 	// CDR Loss of lock
-	.sgmii0_rx_los_low_s( sgmii_rx_los_low[0] ),	// Loss of signal (LO THRESHOLD RANGE) detection    
-
-	.sgmii0_ctc_ins_s(), 			// skip char added by CTC
-	.sgmii0_ctc_orun_s(), 			// CTC FIFO over run error
-	.sgmii0_ctc_urun_s(),			// CTC FIFO under run error
-	.sgmii0_ctc_del_s(), 			// skip char deleted by CTC
-	.sgmii0_pll_lol( pll_lol[0] ),
-	
-	//DCU0 CH1 to PHY1
-	.sgmii1_hdinn( sgmii1_hdinn ), 
-	.sgmii1_hdinp( sgmii1_hdinp ), 
-	.sgmii1_hdoutn( sgmii1_hdoutn ),
-	.sgmii1_hdoutp( sgmii1_hdoutp ), 
-	
-	// DCU resets
-	.sgmii1_rst_dual_c( pcs_rst_dual[0] ),
-	.sgmii1_serdes_rst_dual_c( serdes_rst_dual[0] ),
-	.sgmii1_tx_serdes_rst_c( tx_serdes_rst[0] ),
-	
-	// Channel resets
-    .sgmii1_rx_pcs_rst_c( rx_pcs_rst[1] ),
-	.sgmii1_rx_serdes_rst_c( rx_serdes_rst[1] ),
-	.sgmii1_tx_pcs_rst_c( tx_pcs_rst[1] ),
-	
-	.sgmii1_rx_pwrup_c( 1'b1 ), 	
-	.sgmii1_tx_pwrup_c( 1'b1 ),
- 	.sgmii1_serdes_pdb( 1'b1 ), 
-	
-    .sgmii1_tx_pclk( ), 
-    .sgmii1_txi_clk( pcs_pclk ),
-
-	.sgmii1_rx_cv_err( sgmii_rx_cv_err[1] ), 
-    .sgmii1_rx_disp_err( sgmii_rx_disp_err[1] ), 
-	.sgmii1_rx_k( sgmii_rx_k[1] ), 
-	.sgmii1_rxdata( rx_data1 ), 
-	.sgmii1_tx_disp_correct( sgmii_tx_disp_correct[1] ), 
-    .sgmii1_tx_k(  sgmii_tx_k[1] ), 
-	.sgmii1_txdata( tx_data1 ), 
-	.sgmii1_xmit( 1'b0 ), 				// TODO: Auto Negotiation Bit
-	
-	.sgmii1_signal_detect_c( 1'b1 ), 
-	
-	.sgmii1_ctc_del_s(), 
-	.sgmii1_ctc_ins_s(), 
-	.sgmii1_ctc_orun_s(),	
-    .sgmii1_ctc_urun_s(), 
-	
-	.sgmii1_lsm_status_s( sgmii_lsm_status[1] ), 
-	.sgmii1_rx_cdr_lol_s( sgmii_rx_cdr_lol[1] ), 
-	.sgmii1_rx_los_low_s( sgmii_rx_los_low[1] ),
-
-	// DCU1 CH0 to Expansion
-	.sgmii2_hdinn( sgmii2_hdinn ), 
-	.sgmii2_hdinp( sgmii2_hdinp ), 
-	.sgmii2_hdoutn( sgmii2_hdoutn ),
-	.sgmii2_hdoutp( sgmii2_hdoutp ), 
-	
-	// DCU Tie Offs
-	.sgmii2_cyawstn( 1'b0 ),
-	
-	// DCU resets
-	.sgmii2_rst_dual_c(  pcs_rst_dual[1] ),
-	.sgmii2_serdes_rst_dual_c( serdes_rst_dual[1] ),
-	.sgmii2_tx_serdes_rst_c( tx_serdes_rst[1] ),
-
-	// Channel resets
-	.sgmii2_rx_pcs_rst_c( rx_pcs_rst[2] ),
-	.sgmii2_rx_serdes_rst_c( rx_serdes_rst[2] ),
-	.sgmii2_tx_pcs_rst_c( tx_pcs_rst[2] ),
-	
-	.sgmii2_rx_pwrup_c( 1'b1 ), 	
-	.sgmii2_tx_pwrup_c( 1'b1 ),
-	.sgmii2_serdes_pdb( 1'b1 ), 
-	
-    .sgmii2_tx_pclk( ),
-    .sgmii2_txi_clk( pcs_pclk ),
-
-	.sgmii2_rx_cv_err( sgmii_rx_cv_err[2] ), 
-    .sgmii2_rx_disp_err( sgmii_rx_disp_err[2] ), 
-	.sgmii2_rx_k( sgmii_rx_k[2] ), 
-	.sgmii2_rxdata( rx_data2 ), 
-	.sgmii2_tx_disp_correct( sgmii_tx_disp_correct[2] ), 
-    .sgmii2_tx_k( sgmii_tx_k[2] ), 
-	.sgmii2_txdata( tx_data2 ),
-	.sgmii2_xmit( 1'b0 ), 
-	
-	.sgmii2_signal_detect_c( 1'b1 ), 
-	
-	.sgmii2_ctc_del_s(), 
-	.sgmii2_ctc_ins_s(), 
-	.sgmii2_ctc_orun_s(),	
-    .sgmii2_ctc_urun_s(), 
-	
-	.sgmii2_lsm_status_s( sgmii_lsm_status[2] ), 
-	.sgmii2_rx_cdr_lol_s( sgmii_rx_cdr_lol[2] ), 
-	.sgmii2_rx_los_low_s( sgmii_rx_los_low[2] ),
-	
-	.sgmii2_pll_lol( pll_lol[1] ),
-	
-	// DCU1 CH1 to Expansion
-	.sgmii3_hdinn( sgmii3_hdinn ), 
-	.sgmii3_hdinp( sgmii3_hdinp ), 
-	.sgmii3_hdoutn( sgmii3_hdoutn ),
-	.sgmii3_hdoutp( sgmii3_hdoutp ),
-	
-	// DCU resets
-	.sgmii3_rst_dual_c( pcs_rst_dual[1] ),
-	.sgmii3_serdes_rst_dual_c( serdes_rst_dual[1] ),
-	.sgmii3_tx_serdes_rst_c( tx_serdes_rst[1] ),
-	
-	// Channel resets
-	.sgmii3_rx_pcs_rst_c( rx_pcs_rst[3] ),
-	.sgmii3_rx_serdes_rst_c( rx_serdes_rst[3] ),
-	.sgmii3_tx_pcs_rst_c( tx_pcs_rst[3] ),
-	
-	.sgmii3_rx_pwrup_c( 1'b1 ), 	
-	.sgmii3_tx_pwrup_c( 1'b1 ),
-	
-	.sgmii3_tx_pclk( ), 
-	.sgmii3_txi_clk( pcs_pclk ),
-
-	.sgmii3_rx_cv_err( sgmii_rx_cv_err[3] ), 
-	.sgmii3_rx_disp_err( sgmii_rx_disp_err[3] ), 
-	.sgmii3_rx_k( sgmii_rx_k[3] ), 
-	.sgmii3_rxdata( rx_data3 ), 
-	.sgmii3_tx_disp_correct( sgmii_tx_disp_correct[3] ), 
-`ifdef SHIELD_SFP_SMA
-	.sgmii3_tx_k(rx2_k_m1), 				// MAC 2 RX k  
-	.sgmii3_txdata(rx2_data_m1),			// MAC 2 RX data
-`else
-	.sgmii3_tx_k(  sgmii_tx_k[3] ), 
-	.sgmii3_txdata( tx_data3 ),
-`endif
-	.sgmii3_xmit( 1'b0 ), 				// TODO: Auto Negotiation Bit
-	.sgmii3_signal_detect_c( 1'b1 ), 
-	
-	.sgmii3_ctc_del_s(), 
-	.sgmii3_ctc_ins_s(), 
-	.sgmii3_ctc_orun_s(),	
-	.sgmii3_ctc_urun_s(), 
-	
-	.sgmii3_lsm_status_s( sgmii_lsm_status[3] ), 
-	.sgmii3_rx_cdr_lol_s( sgmii_rx_cdr_lol[3] ), 
-	.sgmii3_rx_los_low_s( sgmii_rx_los_low[3] ),
-
-	
-	// DCU0 SCI 
-	.sgmii0_sci_sel_dual( sci_sel_dual[0] ),
-	.sgmii0_sci_en_dual( 1'b1 ),
-	.sgmii0_sci_addr( mem_addr[5:0] ),		// SCI Register Address Bits
-	.sgmii0_sci_rddata( sci_rddata0 ),
-	.sgmii0_sci_wrdata( mem_d_i[7:0] ),
-	.sgmii0_sci_rd( ~fb_oen ),
-	.sgmii0_sci_wrn( fb_rwn ),
-
-	
-	.sgmii0_sci_sel( sci_sel_ch[0] ),
-	.sgmii0_sci_en( 1'b1 ),
-	
-	.sgmii1_sci_sel( sci_sel_ch[1] ),
-	.sgmii1_sci_en( 1'b1 ),
-	
-	.sgmii0_sci_int( sci_int[1] ),
-	
-	// DCU1 SCI
-	.sgmii2_sci_sel_dual( sci_sel_dual[1] ),
-	.sgmii2_sci_en_dual( 1'b1 ),	
-	.sgmii2_sci_addr( mem_addr[5:0] ),		// SCI Register Address Bits
-	.sgmii2_sci_rddata( sci_rddata1 ),
-	.sgmii2_sci_wrdata( mem_d_i[7:0] ),
-	.sgmii2_sci_rd( ~fb_oen ),
-	.sgmii2_sci_wrn( fb_rwn ),
-	
-	.sgmii2_sci_sel( sci_sel_ch[2] ),
-	.sgmii2_sci_en( 1'b1 ),
-
-	.sgmii2_sci_int( sci_int[0] ),
-	
-	.sgmii3_sci_sel( sci_sel_ch[3] )
-	
-);
-
-// Link Timer for AN
-link_timer link_timer_0(
-	.rstn(rstn),
-	.clk(pcs_pclk),
-	.pulse_1_6ms(pulse_1_6ms),
-	.pulse_10ms(pulse_10ms)
-);
-
-mdio_controller #(.ADDR_SZ( MDIO_ROM_ADDR_SZ )) mdio_controller_0
-(
-	.rstn(rstn),
-	.clk(clk_10),
-	.work_start(mdio_cont_work_start),
-	.work_run(mdio_cont_work_run),
-	.work_done(mdio_cont_work_done),
-	.routine_addr( mdio_routine_addr ),
-	.buffer_full(1'b0),
-	.addr(rom_a),
-	.di(rom_d),
-	.reg_addr(mdio_reg_addr),		
-	.dout(mdio_wd),
-	.ld(mdio_ld),
-	.rwn(mdio_rwn),
-	.done(mdio_done)
-);
-
-`ifdef PHY_MARVELL
-mdio_data_mvl  #(.ADDR_SZ( MDIO_ROM_ADDR_SZ )) mdio_data_mvl_0(
-	.ad( rom_a ),
-	.page( mdio_page_set ),
-	.reg_addr( mdio_reg_addr_set ),
-	.data_in_h( mdio_w_data_h_set ),
-	.data_in_l( mdio_w_data_l_set ),
-	.d( rom_d ),
-	.oe( ~mdio_mux_sel[1] )
-);
-`endif
-	
-mdio_data_ti  #(.ADDR_SZ( MDIO_ROM_ADDR_SZ )) mdio_data_ti_0(
-	.ad( rom_a ),
-	.page( mdio_page_set ),
-	.reg_addr( mdio_reg_addr_set ),
-	.data_in_h( mdio_w_data_h_set ),
-	.data_in_l( mdio_w_data_l_set ),
-	.d( rom_d ),
-	.oe( 1'b1 )
-);
-
-
-/* MDIO mux and output enables */
-always @(*) begin
-	case (mdio_mux_sel)
-		2'b00: mdi = phy0_mdio;
-		2'b01: mdi = phy1_mdio;
-		2'b10: mdi = phy2_mdio;	// compile as 0 if GIGE_SHIELD isn't defined
-		2'b11: mdi = 1'b1;  
-	endcase
-end
-
-assign phy0_mdio = (mdo_oe & ~mdio_mux_sel[1] & ~mdio_mux_sel[0]) ? mdo : 1'bz;
-assign phy1_mdio = (mdo_oe & ~mdio_mux_sel[1] & mdio_mux_sel[0]) ? mdo : 1'bz;
-assign phy2_mdio = (mdo_oe & mdio_mux_sel[1] & ~mdio_mux_sel[0]) ? mdo : 1'bz;
-	
-mdio mdio_0(
-	.rstn(rstn),
-	.mdc(clk_10),
-	// MDIO
-	.mdi(mdi),
-	.mdo(mdo),
-	.mdo_oe(mdo_oe),
-	// mdio controller interface
-	.rwn(mdio_rwn),
-	.phy_addr(5'h00),
-	.reg_addr(mdio_reg_addr),
-	.di(mdio_wd),
-	.ld(mdio_ld),
-	.run( mdio_run ),
-	.done(mdio_done),       // signal controller that mdio xfer is done
-	// output port to converter
-	.dout(mdio_rd),
-	.we( mdio_rd_we )
-);
-
-
-spi spi_0 (
-	.rstn(rstn),
-	.clk(clk_10),
-	// spi signals
-	.spi_cs( spi_cs ),
-	.spi_clk( spi_clk ),
-	.spi_d_in( spi_mosi),
-	.spi_d_o( spi_do ),
-	.spi_d_oe(spi_do_e ),
-	// internal FPGA memory 
-	.mem_addr( mem_addr ),
-	.mux_sel ( mem_do_mux_sel ),
-	.d_i( mem_d_o ),
-	.d_o( mem_d_i ),
-	// individual memory selects
-	.we( mem_we ),
-	.oe( mem_oe ),
-	.dpram_tx_sel( dpram_tx_sel ),
-	.dpram_rx_sel( dpram_rx_sel ),
-	.dpram_ptrs_sel( dpram_ptrs_sel ),
-	.param_sel( param_sel ),
-	.pkt_filter_sel_01( pkt_filter_sel_01 ),
-	.pkt_filter_sel_02( pkt_filter_sel_02 ),
-	.pkt_filter_sel_03( pkt_filter_sel_03 ),
-	.pkt_filter_sel_10( pkt_filter_sel_10 ),
-	.pkt_filter_sel_12( pkt_filter_sel_12 ),
-	.pkt_filter_sel_13( pkt_filter_sel_13 ),
-	.pkt_filter_sel_20( pkt_filter_sel_20 ),
-	.pkt_filter_sel_21( pkt_filter_sel_21 ),
-	.pkt_filter_sel_23( pkt_filter_sel_23 ),
-	.pkt_filter_sel_2u( pkt_filter_sel_2u ),
-	.pkt_filter_sel_30( pkt_filter_sel_30 ),
-	.pkt_filter_sel_31( pkt_filter_sel_31 ),
-	.pkt_filter_sel_32( pkt_filter_sel_32 ),
-	.pkt_filter_sel_u2( pkt_filter_sel_u2 ),
-	.interrupts_sel( int_sel ),
-	.sci_sel_dual( sci_sel_dual ),
-	.sci_sel_ch( sci_sel_ch )
-);
-
-assign spi_miso = spi_do_e ? spi_do : 1'bz;
-
-/* data mux out of internal memories */
-always@(*)
-begin
-	case(mem_do_mux_sel)
-		5'b00000:	mem_d_o = { 2'b0, sci_rddata1 };
-		5'b00001:	mem_d_o = { 2'b0, sci_rddata0 };
-		5'b00010:	mem_d_o = { 1'b0, micro_fifo_do };
-		5'b00011:	mem_d_o = { 1'b0, micro_fifo_do };
-		5'b00100:	mem_d_o = { 1'b0, micro_fifo_do };
-		5'b01000:	mem_d_o = param_ram_0_do;
-		5'b01001:	mem_d_o = param_ram_1_do;
-		5'b01010:	mem_d_o = param_ram_2_do;
-		5'b01011:	mem_d_o = param_ram_3_do;
-		5'b10000:   mem_d_o = { 2'b0, int_do };
-		default: mem_d_o = 9'h0;
-	endcase
-end
-
-`ifdef DARSENA_V01
-
-// only drive the FB AD bus when OE is asserted
-assign fb_ad = fb_ad_oe ? fb_d : 10'bz;
-
-
-always@(*)
-	begin
-		case({fb_cregs_sel,mem_do_mux_sel})
-			6'b000000:	fb_d = { 2'b0, sci_rddata1 };
-			6'b000001:	fb_d = { 2'b0, sci_rddata0 };
-			6'b000010:	fb_d = { 1'b0, micro_fifo_do };
-			6'b000011:	fb_d = { 1'b0, micro_fifo_do };
-			6'b000100:	fb_d = { 1'b0, micro_fifo_do };
-			6'b010000:  fb_d = { 2'b0, int_do };
-			default: fb_d = fb_ad_o;
-		endcase
-	end
-
-	
-flexbus flexbus_0(
-	.clk( fb_clk ),
-	.rstn( rstn ),
-	// strobes
-	.fb_ale( fb_ale ),
-	.fb_oen( fb_oen ),
-	.fb_rwn( fb_rwn ),
-	.fb_csn( fb_csn ),
-	// control
-	.cregs_sel( fb_cregs_sel ),
-	// muxed addr and data
-	.fb_ad_i( fb_ad ),
-	.fb_ad_o( fb_ad_o ),
-	.fb_ad_oe( fb_ad_oe ),
-	// sys mem 
-	.mem_addr( mem_addr ),
-	.mux_sel ( mem_do_mux_sel ),
-	// dpram controls
-	.dpram_we( mem_we ),
-	.dpram_oe( mem_oe ),
-	.dpram_tx_sel( dpram_tx_sel ),
-	.dpram_rx_sel( dpram_rx_sel ),
-	.dpram_ptrs_sel( dpram_ptrs_sel ),
-	.param_sel( param_sel ),
-	.pkt_filter_sel_01( pkt_filter_sel_01 ),
-	.pkt_filter_sel_02( pkt_filter_sel_02 ),
-	.pkt_filter_sel_10( pkt_filter_sel_10 ),
-	.pkt_filter_sel_12( pkt_filter_sel_12 ),
-	.pkt_filter_sel_20( pkt_filter_sel_20 ),
-	.pkt_filter_sel_21( pkt_filter_sel_21 ),
-	.pkt_filter_sel_23( pkt_filter_sel_23 ),
-	.interrupts_sel( int_sel ),
-	// SCI I/F
-	.sci_sel_dual( sci_sel_dual ),
-	.sci_sel_ch( sci_sel_ch )
-);
-
-`endif
-
-interrupts interrupts_0(
-	.rstn( rstn ),	
-	.clk( pcs_pclk ),
-	.uc_clk( clk_10 ),
-	// uC interface
-	.sel( int_sel ),
-	.we( mem_we ),
-	.addr( mem_addr[0] ),
-	.d_in( mem_d_i[6:0] ),
-	.d_out( int_do ),
-	// interrupt sources
-	.cont_int( micro_fifo_int ),
-	.phy_int ( { 2'b0, phy1_intn, phy0_intn }),
-	.mac_int ( { mac_int[3], mac_int[2], mac_int[1], mac_int[0] } ),
-	.int_o(  )
-);
-
-
-assign i2c_sda = sda_oe ? sda_o : 1'bz;
-assign i2c_scl = scl_oe ? scl_o : 1'bz;
-
-i2c i2c_0(
-	.rstn( rstn ),
-	.clk( clk_10 ),
-	// external I2C I/O
-	.scl_i( i2c_scl ),
-	.scl_o( scl_o ),
-	.scl_oe( scl_oe ),
-	.sda_i( i2c_sda ),
-	.sda_o( sda_o ),
-	.sda_oe( sda_oe ),
-	// shared memory and controller data output
-	.mem_do( i2c_d_o ),
-	// dedicated memory interface
-	.mem_ad(  ),
-	.mem_we(  ),
-	.mem_ce( ),
-	.mem_di( 8'haa ),
-	// dedicated controller write interface
-	.cont_we( i2c_cont_we ),
-	.cont_done( i2c_cont_done ),
-	// Controller->FIFO input interface
-	.fifo_re( i2c_fifo_re ),
-	.tx_fifo_empty(  cont_fifo_empty ),
-	.fifo_di( fifo_r_d[6:0] )
-);
-
-
-/* 
-*	ext_sys_fifo delays and enables:
-*	we need the re delay since we need to generate a re pulse from the 
-*	uart block, which is clocked at a slower rate.  
-*	we need the mdio_we delay since the fifo is clocked twice: high and low data
-*
-*/
-always@ ( posedge clk_10 or negedge rstn )
-	begin
-		if ( !rstn )
-			begin
-				cont_fifo_re_m1 <= 1'b0;
-				cont_fifo_re_m2 <= 1'b0;
-			end
-		else
-			begin
-				cont_fifo_re_m1 <= uart_fifo_re | i2c_fifo_re;
-				cont_fifo_re_m2 <= cont_fifo_re_m1;
-			end
-	end
-
-// create a single re pulse since uart runs slow.
-assign i_cont_fifo_re = cont_fifo_re_m1 & ~cont_fifo_re_m2;
-
-assign bin_to_ascii_we = mdio_rd_we | cont_rd_we;
-assign bin_to_ascii_d_in = read_fifo_mux_sel ? mdio_rd : cont_rd;
-
-/* 
- * Input: MDIO writes
- * Output: UART/I2C read FIFO
- */
-bin_to_ascii bin_to_ascii_0(
-	.rstn( rstn ),
-	.clk( clk_10 ),
-	.width ( 1'b1 ),
-	// mdio interface
-	.we_i ( bin_to_ascii_we ),
-	.d_in( bin_to_ascii_d_in ),
-	// mdio controller interface
-	.run ( bin_to_ascii_run ),
-	.done (),
-	.busy( 1'b0 ),
-	// fifo port
-	.we_o ( read_fifo_we ),
-	.d_out( read_fifo_d_i )
-);
-
-/*
- * Input: bin_to_ascii
- * Output: I2C or UART read
- */
-sync_fifo ext_sys_fifo_0(
-	.rstn( rstn ),
-	.clk ( clk_10 ),
-	// input
-	.we ( read_fifo_we ),
-	.d_in ( { 2'b0, read_fifo_d_i } ),
-	// output
-	.re ( i_cont_fifo_re ),
-	.d_out( fifo_r_d ),
-	.empty( cont_fifo_empty ),
-	.almost_full(  ),
-	.reset_ptrs( 1'b0 ),
-	// debug
-	.active( )
-);
-
-always @(*) begin
-	case (mdio_mux_sel)
-		2'b00: rx_cdr_lol = sgmii_rx_cdr_lol[0];
-		2'b01: rx_cdr_lol = sgmii_rx_cdr_lol[1];
-		2'b10: rx_cdr_lol = sgmii_rx_cdr_lol[2];
-		2'b11: rx_cdr_lol = 1'b1;  
-	endcase
-end
-
-always @(*) begin
-	case (mdio_mux_sel)
-		2'b00: lsm_status = sgmii_lsm_status[0];
-		2'b01: lsm_status = sgmii_lsm_status[1];
-		2'b10: lsm_status = sgmii_lsm_status[2];
-		2'b11: lsm_status = 1'b1;  
-	endcase
-end
-
-always @(*) begin
-	case (mdio_mux_sel)
-		2'b00: rx_los_low = sgmii_rx_los_low[0];
-		2'b01: rx_los_low = sgmii_rx_los_low[1];
-		2'b10: rx_los_low = sgmii_rx_los_low[2];
-		2'b11: rx_los_low = 1'b1;  
-	endcase
-end
-	
-/* Debug and Arduino Expansion */
-
-assign led[0] = 1'b1;
-assign led[1] = phy_up[0];
-assign led[2] = phy_up[1];
-	
-`ifdef DEBUG_SPI
-	assign ard_scl = spi_clk;
-	assign ard_sda = spi_cs;
-	assign ard_rxd1 = spi_do_e ? spi_do : 1'bz;
-	assign ard_txd1 = spi_mosi;
-`elsif DEBUG_MDIO
-	assign ard_scl = phy_mdc;
-	assign ard_sda = phy0_mdio;
-	assign ard_rxd1 = 1'bz;
-	assign ard_txd1 = refclko;
-`elsif DEBUG_IC2
-	assign ard_scl = i2c_scl;
-	assign ard_sda = sda_oe ? sda_o : i2c_sda;
-	assign ard_rxd1 = 1'bz;
-	assign ard_txd1 = sda_oe;
-`else 
-	assign ard_scl = rx_sop[0];
-	assign ard_sda = 1'bz;
-`endif
-
-`ifdef ARD_EXP_UART
-	assign ard_txd2 = uart_txd;
-	assign uart_rxd = ard_rxd2;
-	assign ftdi_tdi_rxd = 1'bz;
-`else
-	
-	// assign uart_rxd = ftdi_tck_txd;	
-`endif
-
-	assign ftdi_tdi_rxd = 1'bz;
-
-	assign 	pe1 = pcs_error[2];		// RX data on SFP good
-	assign  pe4  = ~sgmii_tx_k[2];
-	assign  pe5  = phy1_gpio[1];
-	assign  pg5  = 1'bz;
-	assign  pe3  = fpga_gpio;
-
-`ifdef SHIELD_SFP_SMA
-
-	// SFP UART testing
-	assign uart_rxd = ph3;
-	assign ph4 = uart_txd;
-
-	// SFP LEDS
-	assign sfp_led1 = !sfp_pres_n;
-	assign sfp_led2 = !sfp_tx_fault;
-	assign sfp_led3 = !sfp_los;
-	assign sfp_led4 = !pcs_error[2];
-	assign sfp_led5 = phy_up[0];
-	assign sfp_led6 = !mac_tx_active[0];
-`endif
-	
-	assign fpga_int = pcs_error[2] | pcs_error[3];
-	
-`ifdef DARSENA_V02
-	assign fpga_jtag_e =1'b1;
-`endif
-
-endmodule
-- 
cgit v1.2.3-8-gadcc