From ed46e1a38ae2de97b55c1843bad8b813bd4936e3 Mon Sep 17 00:00:00 2001 From: mindchasers Date: Sun, 7 Jul 2019 17:58:07 -0400 Subject: initial commit of private island ARM test suite --- drivers/fsl_i2c.h | 821 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 821 insertions(+) create mode 100644 drivers/fsl_i2c.h (limited to 'drivers/fsl_i2c.h') diff --git a/drivers/fsl_i2c.h b/drivers/fsl_i2c.h new file mode 100644 index 0000000..04e3e5e --- /dev/null +++ b/drivers/fsl_i2c.h @@ -0,0 +1,821 @@ +/* + * The Clear BSD License + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted (subject to the limitations in the disclaimer below) provided + * that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _FSL_I2C_H_ +#define _FSL_I2C_H_ + +#include "fsl_common.h" + +/*! + * @addtogroup i2c_driver + * @{ + */ + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +/*! @brief I2C driver version 2.0.5. */ +#define FSL_I2C_DRIVER_VERSION (MAKE_VERSION(2, 0, 5)) +/*@}*/ + +/*! @brief Timeout times for waiting flag. */ +#ifndef I2C_WAIT_TIMEOUT +#define I2C_WAIT_TIMEOUT 0U /* Define to zero means keep waiting until the flag is assert/deassert. */ +#endif + +#if (defined(FSL_FEATURE_I2C_HAS_START_STOP_DETECT) && FSL_FEATURE_I2C_HAS_START_STOP_DETECT || \ + defined(FSL_FEATURE_I2C_HAS_STOP_DETECT) && FSL_FEATURE_I2C_HAS_STOP_DETECT) +#define I2C_HAS_STOP_DETECT +#endif /* FSL_FEATURE_I2C_HAS_START_STOP_DETECT / FSL_FEATURE_I2C_HAS_STOP_DETECT */ + +/*! @brief I2C status return codes. */ +enum _i2c_status +{ + kStatus_I2C_Busy = MAKE_STATUS(kStatusGroup_I2C, 0), /*!< I2C is busy with current transfer. */ + kStatus_I2C_Idle = MAKE_STATUS(kStatusGroup_I2C, 1), /*!< Bus is Idle. */ + kStatus_I2C_Nak = MAKE_STATUS(kStatusGroup_I2C, 2), /*!< NAK received during transfer. */ + kStatus_I2C_ArbitrationLost = MAKE_STATUS(kStatusGroup_I2C, 3), /*!< Arbitration lost during transfer. */ + kStatus_I2C_Timeout = MAKE_STATUS(kStatusGroup_I2C, 4), /*!< Timeout poling status flags. */ + kStatus_I2C_Addr_Nak = MAKE_STATUS(kStatusGroup_I2C, 5), /*!< NAK received during the address probe. */ +}; + +/*! + * @brief I2C peripheral flags + * + * The following status register flags can be cleared: + * - #kI2C_ArbitrationLostFlag + * - #kI2C_IntPendingFlag + * - #kI2C_StartDetectFlag + * - #kI2C_StopDetectFlag + * + * @note These enumerations are meant to be OR'd together to form a bit mask. + * + */ +enum _i2c_flags +{ + kI2C_ReceiveNakFlag = I2C_S_RXAK_MASK, /*!< I2C receive NAK flag. */ + kI2C_IntPendingFlag = I2C_S_IICIF_MASK, /*!< I2C interrupt pending flag. */ + kI2C_TransferDirectionFlag = I2C_S_SRW_MASK, /*!< I2C transfer direction flag. */ + kI2C_RangeAddressMatchFlag = I2C_S_RAM_MASK, /*!< I2C range address match flag. */ + kI2C_ArbitrationLostFlag = I2C_S_ARBL_MASK, /*!< I2C arbitration lost flag. */ + kI2C_BusBusyFlag = I2C_S_BUSY_MASK, /*!< I2C bus busy flag. */ + kI2C_AddressMatchFlag = I2C_S_IAAS_MASK, /*!< I2C address match flag. */ + kI2C_TransferCompleteFlag = I2C_S_TCF_MASK, /*!< I2C transfer complete flag. */ +#ifdef I2C_HAS_STOP_DETECT + kI2C_StopDetectFlag = I2C_FLT_STOPF_MASK << 8, /*!< I2C stop detect flag. */ +#endif /* FSL_FEATURE_I2C_HAS_START_STOP_DETECT / FSL_FEATURE_I2C_HAS_STOP_DETECT */ + +#if defined(FSL_FEATURE_I2C_HAS_START_STOP_DETECT) && FSL_FEATURE_I2C_HAS_START_STOP_DETECT + kI2C_StartDetectFlag = I2C_FLT_STARTF_MASK << 8, /*!< I2C start detect flag. */ +#endif /* FSL_FEATURE_I2C_HAS_START_STOP_DETECT */ +}; + +/*! @brief I2C feature interrupt source. */ +enum _i2c_interrupt_enable +{ + kI2C_GlobalInterruptEnable = I2C_C1_IICIE_MASK, /*!< I2C global interrupt. */ + +#if defined(FSL_FEATURE_I2C_HAS_STOP_DETECT) && FSL_FEATURE_I2C_HAS_STOP_DETECT + kI2C_StopDetectInterruptEnable = I2C_FLT_STOPIE_MASK, /*!< I2C stop detect interrupt. */ +#endif /* FSL_FEATURE_I2C_HAS_STOP_DETECT */ + +#if defined(FSL_FEATURE_I2C_HAS_START_STOP_DETECT) && FSL_FEATURE_I2C_HAS_START_STOP_DETECT + kI2C_StartStopDetectInterruptEnable = I2C_FLT_SSIE_MASK, /*!< I2C start&stop detect interrupt. */ +#endif /* FSL_FEATURE_I2C_HAS_START_STOP_DETECT */ +}; + +/*! @brief The direction of master and slave transfers. */ +typedef enum _i2c_direction +{ + kI2C_Write = 0x0U, /*!< Master transmits to the slave. */ + kI2C_Read = 0x1U, /*!< Master receives from the slave. */ +} i2c_direction_t; + +/*! @brief Addressing mode. */ +typedef enum _i2c_slave_address_mode +{ + kI2C_Address7bit = 0x0U, /*!< 7-bit addressing mode. */ + kI2C_RangeMatch = 0X2U, /*!< Range address match addressing mode. */ +} i2c_slave_address_mode_t; + +/*! @brief I2C transfer control flag. */ +enum _i2c_master_transfer_flags +{ + kI2C_TransferDefaultFlag = 0x0U, /*!< A transfer starts with a start signal, stops with a stop signal. */ + kI2C_TransferNoStartFlag = 0x1U, /*!< A transfer starts without a start signal, only support write only or + write+read with no start flag, do not support read only with no start flag. */ + kI2C_TransferRepeatedStartFlag = 0x2U, /*!< A transfer starts with a repeated start signal. */ + kI2C_TransferNoStopFlag = 0x4U, /*!< A transfer ends without a stop signal. */ +}; + +/*! + * @brief Set of events sent to the callback for nonblocking slave transfers. + * + * These event enumerations are used for two related purposes. First, a bit mask created by OR'ing together + * events is passed to I2C_SlaveTransferNonBlocking() to specify which events to enable. + * Then, when the slave callback is invoked, it is passed the current event through its @a transfer + * parameter. + * + * @note These enumerations are meant to be OR'd together to form a bit mask of events. + */ +typedef enum _i2c_slave_transfer_event +{ + kI2C_SlaveAddressMatchEvent = 0x01U, /*!< Received the slave address after a start or repeated start. */ + kI2C_SlaveTransmitEvent = 0x02U, /*!< A callback is requested to provide data to transmit + (slave-transmitter role). */ + kI2C_SlaveReceiveEvent = 0x04U, /*!< A callback is requested to provide a buffer in which to place received + data (slave-receiver role). */ + kI2C_SlaveTransmitAckEvent = 0x08U, /*!< A callback needs to either transmit an ACK or NACK. */ +#if defined(FSL_FEATURE_I2C_HAS_START_STOP_DETECT) && FSL_FEATURE_I2C_HAS_START_STOP_DETECT + kI2C_SlaveStartEvent = 0x10U, /*!< A start/repeated start was detected. */ +#endif + kI2C_SlaveCompletionEvent = 0x20U, /*!< A stop was detected or finished transfer, completing the transfer. */ + kI2C_SlaveGenaralcallEvent = 0x40U, /*!< Received the general call address after a start or repeated start. */ + + /*! A bit mask of all available events. */ + kI2C_SlaveAllEvents = kI2C_SlaveAddressMatchEvent | kI2C_SlaveTransmitEvent | kI2C_SlaveReceiveEvent | +#if defined(FSL_FEATURE_I2C_HAS_START_STOP_DETECT) && FSL_FEATURE_I2C_HAS_START_STOP_DETECT + kI2C_SlaveStartEvent | +#endif + kI2C_SlaveCompletionEvent | kI2C_SlaveGenaralcallEvent, +} i2c_slave_transfer_event_t; + +/*! @brief I2C master user configuration. */ +typedef struct _i2c_master_config +{ + bool enableMaster; /*!< Enables the I2C peripheral at initialization time. */ +#if defined(FSL_FEATURE_I2C_HAS_STOP_HOLD_OFF) && FSL_FEATURE_I2C_HAS_STOP_HOLD_OFF + bool enableStopHold; /*!< Controls the stop hold enable. */ +#endif +#if defined(FSL_FEATURE_I2C_HAS_DOUBLE_BUFFER_ENABLE) && FSL_FEATURE_I2C_HAS_DOUBLE_BUFFER_ENABLE + bool enableDoubleBuffering; /*!< Controls double buffer enable; notice that + enabling the double buffer disables the clock stretch. */ +#endif + uint32_t baudRate_Bps; /*!< Baud rate configuration of I2C peripheral. */ + uint8_t glitchFilterWidth; /*!< Controls the width of the glitch. */ +} i2c_master_config_t; + +/*! @brief I2C slave user configuration. */ +typedef struct _i2c_slave_config +{ + bool enableSlave; /*!< Enables the I2C peripheral at initialization time. */ + bool enableGeneralCall; /*!< Enables the general call addressing mode. */ + bool enableWakeUp; /*!< Enables/disables waking up MCU from low-power mode. */ +#if defined(FSL_FEATURE_I2C_HAS_DOUBLE_BUFFER_ENABLE) && FSL_FEATURE_I2C_HAS_DOUBLE_BUFFER_ENABLE + bool enableDoubleBuffering; /*!< Controls a double buffer enable; notice that + enabling the double buffer disables the clock stretch. */ +#endif + bool enableBaudRateCtl; /*!< Enables/disables independent slave baud rate on SCL in very fast I2C modes. */ + uint16_t slaveAddress; /*!< A slave address configuration. */ + uint16_t upperAddress; /*!< A maximum boundary slave address used in a range matching mode. */ + i2c_slave_address_mode_t + addressingMode; /*!< An addressing mode configuration of i2c_slave_address_mode_config_t. */ + uint32_t sclStopHoldTime_ns; /*!< the delay from the rising edge of SCL (I2C clock) to the rising edge of SDA (I2C + data) while SCL is high (stop condition), SDA hold time and SCL start hold time + are also configured according to the SCL stop hold time. */ +} i2c_slave_config_t; + +/*! @brief I2C master handle typedef. */ +typedef struct _i2c_master_handle i2c_master_handle_t; + +/*! @brief I2C master transfer callback typedef. */ +typedef void (*i2c_master_transfer_callback_t)(I2C_Type *base, + i2c_master_handle_t *handle, + status_t status, + void *userData); + +/*! @brief I2C slave handle typedef. */ +typedef struct _i2c_slave_handle i2c_slave_handle_t; + +/*! @brief I2C master transfer structure. */ +typedef struct _i2c_master_transfer +{ + uint32_t flags; /*!< A transfer flag which controls the transfer. */ + uint8_t slaveAddress; /*!< 7-bit slave address. */ + i2c_direction_t direction; /*!< A transfer direction, read or write. */ + uint32_t subaddress; /*!< A sub address. Transferred MSB first. */ + uint8_t subaddressSize; /*!< A size of the command buffer. */ + uint8_t *volatile data; /*!< A transfer buffer. */ + volatile size_t dataSize; /*!< A transfer size. */ +} i2c_master_transfer_t; + +/*! @brief I2C master handle structure. */ +struct _i2c_master_handle +{ + i2c_master_transfer_t transfer; /*!< I2C master transfer copy. */ + size_t transferSize; /*!< Total bytes to be transferred. */ + uint8_t state; /*!< A transfer state maintained during transfer. */ + i2c_master_transfer_callback_t completionCallback; /*!< A callback function called when the transfer is finished. */ + void *userData; /*!< A callback parameter passed to the callback function. */ +}; + +/*! @brief I2C slave transfer structure. */ +typedef struct _i2c_slave_transfer +{ + i2c_slave_transfer_event_t event; /*!< A reason that the callback is invoked. */ + uint8_t *volatile data; /*!< A transfer buffer. */ + volatile size_t dataSize; /*!< A transfer size. */ + status_t completionStatus; /*!< Success or error code describing how the transfer completed. Only applies for + #kI2C_SlaveCompletionEvent. */ + size_t transferredCount; /*!< A number of bytes actually transferred since the start or since the last repeated + start. */ +} i2c_slave_transfer_t; + +/*! @brief I2C slave transfer callback typedef. */ +typedef void (*i2c_slave_transfer_callback_t)(I2C_Type *base, i2c_slave_transfer_t *xfer, void *userData); + +/*! @brief I2C slave handle structure. */ +struct _i2c_slave_handle +{ + volatile bool isBusy; /*!< Indicates whether a transfer is busy. */ + i2c_slave_transfer_t transfer; /*!< I2C slave transfer copy. */ + uint32_t eventMask; /*!< A mask of enabled events. */ + i2c_slave_transfer_callback_t callback; /*!< A callback function called at the transfer event. */ + void *userData; /*!< A callback parameter passed to the callback. */ +}; + +/******************************************************************************* + * Variables + ******************************************************************************/ +/*! @brief Pointers to i2c bases for each instance. */ +extern I2C_Type *const s_i2cBases[]; + +/******************************************************************************* + * API + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /*_cplusplus. */ + +/*! + * @name Initialization and deinitialization + * @{ + */ + +/*! + * @brief Initializes the I2C peripheral. Call this API to ungate the I2C clock + * and configure the I2C with master configuration. + * + * @note This API should be called at the beginning of the application. + * Otherwise, any operation to the I2C module can cause a hard fault + * because the clock is not enabled. The configuration structure can be custom filled + * or it can be set with default values by using the I2C_MasterGetDefaultConfig(). + * After calling this API, the master is ready to transfer. + * This is an example. + * @code + * i2c_master_config_t config = { + * .enableMaster = true, + * .enableStopHold = false, + * .highDrive = false, + * .baudRate_Bps = 100000, + * .glitchFilterWidth = 0 + * }; + * I2C_MasterInit(I2C0, &config, 12000000U); + * @endcode + * + * @param base I2C base pointer + * @param masterConfig A pointer to the master configuration structure + * @param srcClock_Hz I2C peripheral clock frequency in Hz + */ +void I2C_MasterInit(I2C_Type *base, const i2c_master_config_t *masterConfig, uint32_t srcClock_Hz); + +/*! + * @brief Initializes the I2C peripheral. Call this API to ungate the I2C clock + * and initialize the I2C with the slave configuration. + * + * @note This API should be called at the beginning of the application. + * Otherwise, any operation to the I2C module can cause a hard fault + * because the clock is not enabled. The configuration structure can partly be set + * with default values by I2C_SlaveGetDefaultConfig() or it can be custom filled by the user. + * This is an example. + * @code + * i2c_slave_config_t config = { + * .enableSlave = true, + * .enableGeneralCall = false, + * .addressingMode = kI2C_Address7bit, + * .slaveAddress = 0x1DU, + * .enableWakeUp = false, + * .enablehighDrive = false, + * .enableBaudRateCtl = false, + * .sclStopHoldTime_ns = 4000 + * }; + * I2C_SlaveInit(I2C0, &config, 12000000U); + * @endcode + * + * @param base I2C base pointer + * @param slaveConfig A pointer to the slave configuration structure + * @param srcClock_Hz I2C peripheral clock frequency in Hz + */ +void I2C_SlaveInit(I2C_Type *base, const i2c_slave_config_t *slaveConfig, uint32_t srcClock_Hz); + +/*! + * @brief De-initializes the I2C master peripheral. Call this API to gate the I2C clock. + * The I2C master module can't work unless the I2C_MasterInit is called. + * @param base I2C base pointer + */ +void I2C_MasterDeinit(I2C_Type *base); + +/*! + * @brief De-initializes the I2C slave peripheral. Calling this API gates the I2C clock. + * The I2C slave module can't work unless the I2C_SlaveInit is called to enable the clock. + * @param base I2C base pointer + */ +void I2C_SlaveDeinit(I2C_Type *base); + +/*! + * @brief Get instance number for I2C module. + * + * @param base I2C peripheral base address. + */ +uint32_t I2C_GetInstance(I2C_Type *base); + +/*! + * @brief Sets the I2C master configuration structure to default values. + * + * The purpose of this API is to get the configuration structure initialized for use in the I2C_MasterConfigure(). + * Use the initialized structure unchanged in the I2C_MasterConfigure() or modify + * the structure before calling the I2C_MasterConfigure(). + * This is an example. + * @code + * i2c_master_config_t config; + * I2C_MasterGetDefaultConfig(&config); + * @endcode + * @param masterConfig A pointer to the master configuration structure. +*/ +void I2C_MasterGetDefaultConfig(i2c_master_config_t *masterConfig); + +/*! + * @brief Sets the I2C slave configuration structure to default values. + * + * The purpose of this API is to get the configuration structure initialized for use in the I2C_SlaveConfigure(). + * Modify fields of the structure before calling the I2C_SlaveConfigure(). + * This is an example. + * @code + * i2c_slave_config_t config; + * I2C_SlaveGetDefaultConfig(&config); + * @endcode + * @param slaveConfig A pointer to the slave configuration structure. + */ +void I2C_SlaveGetDefaultConfig(i2c_slave_config_t *slaveConfig); + +/*! + * @brief Enables or disabless the I2C peripheral operation. + * + * @param base I2C base pointer + * @param enable Pass true to enable and false to disable the module. + */ +static inline void I2C_Enable(I2C_Type *base, bool enable) +{ + if (enable) + { + base->C1 |= I2C_C1_IICEN_MASK; + } + else + { + base->C1 &= ~I2C_C1_IICEN_MASK; + } +} + +/* @} */ + +/*! + * @name Status + * @{ + */ + +/*! + * @brief Gets the I2C status flags. + * + * @param base I2C base pointer + * @return status flag, use status flag to AND #_i2c_flags to get the related status. + */ +uint32_t I2C_MasterGetStatusFlags(I2C_Type *base); + +/*! + * @brief Gets the I2C status flags. + * + * @param base I2C base pointer + * @return status flag, use status flag to AND #_i2c_flags to get the related status. + */ +static inline uint32_t I2C_SlaveGetStatusFlags(I2C_Type *base) +{ + return I2C_MasterGetStatusFlags(base); +} + +/*! + * @brief Clears the I2C status flag state. + * + * The following status register flags can be cleared kI2C_ArbitrationLostFlag and kI2C_IntPendingFlag. + * + * @param base I2C base pointer + * @param statusMask The status flag mask, defined in type i2c_status_flag_t. + * The parameter can be any combination of the following values: + * @arg kI2C_StartDetectFlag (if available) + * @arg kI2C_StopDetectFlag (if available) + * @arg kI2C_ArbitrationLostFlag + * @arg kI2C_IntPendingFlagFlag + */ +static inline void I2C_MasterClearStatusFlags(I2C_Type *base, uint32_t statusMask) +{ +/* Must clear the STARTF / STOPF bits prior to clearing IICIF */ +#if defined(FSL_FEATURE_I2C_HAS_START_STOP_DETECT) && FSL_FEATURE_I2C_HAS_START_STOP_DETECT + if (statusMask & kI2C_StartDetectFlag) + { + /* Shift the odd-ball flags back into place. */ + base->FLT |= (uint8_t)(statusMask >> 8U); + } +#endif + +#ifdef I2C_HAS_STOP_DETECT + if (statusMask & kI2C_StopDetectFlag) + { + /* Shift the odd-ball flags back into place. */ + base->FLT |= (uint8_t)(statusMask >> 8U); + } +#endif + + base->S = (uint8_t)statusMask; +} + +/*! + * @brief Clears the I2C status flag state. + * + * The following status register flags can be cleared kI2C_ArbitrationLostFlag and kI2C_IntPendingFlag + * + * @param base I2C base pointer + * @param statusMask The status flag mask, defined in type i2c_status_flag_t. + * The parameter can be any combination of the following values: + * @arg kI2C_StartDetectFlag (if available) + * @arg kI2C_StopDetectFlag (if available) + * @arg kI2C_ArbitrationLostFlag + * @arg kI2C_IntPendingFlagFlag + */ +static inline void I2C_SlaveClearStatusFlags(I2C_Type *base, uint32_t statusMask) +{ + I2C_MasterClearStatusFlags(base, statusMask); +} + +/* @} */ + +/*! + * @name Interrupts + * @{ + */ + +/*! + * @brief Enables I2C interrupt requests. + * + * @param base I2C base pointer + * @param mask interrupt source + * The parameter can be combination of the following source if defined: + * @arg kI2C_GlobalInterruptEnable + * @arg kI2C_StopDetectInterruptEnable/kI2C_StartDetectInterruptEnable + * @arg kI2C_SdaTimeoutInterruptEnable + */ +void I2C_EnableInterrupts(I2C_Type *base, uint32_t mask); + +/*! + * @brief Disables I2C interrupt requests. + * + * @param base I2C base pointer + * @param mask interrupt source + * The parameter can be combination of the following source if defined: + * @arg kI2C_GlobalInterruptEnable + * @arg kI2C_StopDetectInterruptEnable/kI2C_StartDetectInterruptEnable + * @arg kI2C_SdaTimeoutInterruptEnable + */ +void I2C_DisableInterrupts(I2C_Type *base, uint32_t mask); + +/*! + * @name DMA Control + * @{ + */ +#if defined(FSL_FEATURE_I2C_HAS_DMA_SUPPORT) && FSL_FEATURE_I2C_HAS_DMA_SUPPORT +/*! + * @brief Enables/disables the I2C DMA interrupt. + * + * @param base I2C base pointer + * @param enable true to enable, false to disable +*/ +static inline void I2C_EnableDMA(I2C_Type *base, bool enable) +{ + if (enable) + { + base->C1 |= I2C_C1_DMAEN_MASK; + } + else + { + base->C1 &= ~I2C_C1_DMAEN_MASK; + } +} + +#endif /* FSL_FEATURE_I2C_HAS_DMA_SUPPORT */ + +/*! + * @brief Gets the I2C tx/rx data register address. This API is used to provide a transfer address + * for I2C DMA transfer configuration. + * + * @param base I2C base pointer + * @return data register address + */ +static inline uint32_t I2C_GetDataRegAddr(I2C_Type *base) +{ + return (uint32_t)(&(base->D)); +} + +/* @} */ +/*! + * @name Bus Operations + * @{ + */ + +/*! + * @brief Sets the I2C master transfer baud rate. + * + * @param base I2C base pointer + * @param baudRate_Bps the baud rate value in bps + * @param srcClock_Hz Source clock + */ +void I2C_MasterSetBaudRate(I2C_Type *base, uint32_t baudRate_Bps, uint32_t srcClock_Hz); + +/*! + * @brief Sends a START on the I2C bus. + * + * This function is used to initiate a new master mode transfer by sending the START signal. + * The slave address is sent following the I2C START signal. + * + * @param base I2C peripheral base pointer + * @param address 7-bit slave device address. + * @param direction Master transfer directions(transmit/receive). + * @retval kStatus_Success Successfully send the start signal. + * @retval kStatus_I2C_Busy Current bus is busy. + */ +status_t I2C_MasterStart(I2C_Type *base, uint8_t address, i2c_direction_t direction); + +/*! + * @brief Sends a STOP signal on the I2C bus. + * + * @retval kStatus_Success Successfully send the stop signal. + * @retval kStatus_I2C_Timeout Send stop signal failed, timeout. + */ +status_t I2C_MasterStop(I2C_Type *base); + +/*! + * @brief Sends a REPEATED START on the I2C bus. + * + * @param base I2C peripheral base pointer + * @param address 7-bit slave device address. + * @param direction Master transfer directions(transmit/receive). + * @retval kStatus_Success Successfully send the start signal. + * @retval kStatus_I2C_Busy Current bus is busy but not occupied by current I2C master. + */ +status_t I2C_MasterRepeatedStart(I2C_Type *base, uint8_t address, i2c_direction_t direction); + +/*! + * @brief Performs a polling send transaction on the I2C bus. + * + * @param base The I2C peripheral base pointer. + * @param txBuff The pointer to the data to be transferred. + * @param txSize The length in bytes of the data to be transferred. + * @param flags Transfer control flag to decide whether need to send a stop, use kI2C_TransferDefaultFlag +* to issue a stop and kI2C_TransferNoStop to not send a stop. + * @retval kStatus_Success Successfully complete the data transmission. + * @retval kStatus_I2C_ArbitrationLost Transfer error, arbitration lost. + * @retval kStataus_I2C_Nak Transfer error, receive NAK during transfer. + */ +status_t I2C_MasterWriteBlocking(I2C_Type *base, const uint8_t *txBuff, size_t txSize, uint32_t flags); + +/*! + * @brief Performs a polling receive transaction on the I2C bus. + * + * @note The I2C_MasterReadBlocking function stops the bus before reading the final byte. + * Without stopping the bus prior for the final read, the bus issues another read, resulting + * in garbage data being read into the data register. + * + * @param base I2C peripheral base pointer. + * @param rxBuff The pointer to the data to store the received data. + * @param rxSize The length in bytes of the data to be received. + * @param flags Transfer control flag to decide whether need to send a stop, use kI2C_TransferDefaultFlag +* to issue a stop and kI2C_TransferNoStop to not send a stop. + * @retval kStatus_Success Successfully complete the data transmission. + * @retval kStatus_I2C_Timeout Send stop signal failed, timeout. + */ +status_t I2C_MasterReadBlocking(I2C_Type *base, uint8_t *rxBuff, size_t rxSize, uint32_t flags); + +/*! + * @brief Performs a polling send transaction on the I2C bus. + * + * @param base The I2C peripheral base pointer. + * @param txBuff The pointer to the data to be transferred. + * @param txSize The length in bytes of the data to be transferred. + * @retval kStatus_Success Successfully complete the data transmission. + * @retval kStatus_I2C_ArbitrationLost Transfer error, arbitration lost. + * @retval kStataus_I2C_Nak Transfer error, receive NAK during transfer. + */ +status_t I2C_SlaveWriteBlocking(I2C_Type *base, const uint8_t *txBuff, size_t txSize); + +/*! + * @brief Performs a polling receive transaction on the I2C bus. + * + * @param base I2C peripheral base pointer. + * @param rxBuff The pointer to the data to store the received data. + * @param rxSize The length in bytes of the data to be received. + * @retval kStatus_Success Successfully complete data receive. + * @retval kStatus_I2C_Timeout Wait status flag timeout. + */ +status_t I2C_SlaveReadBlocking(I2C_Type *base, uint8_t *rxBuff, size_t rxSize); + +/*! + * @brief Performs a master polling transfer on the I2C bus. + * + * @note The API does not return until the transfer succeeds or fails due + * to arbitration lost or receiving a NAK. + * + * @param base I2C peripheral base address. + * @param xfer Pointer to the transfer structure. + * @retval kStatus_Success Successfully complete the data transmission. + * @retval kStatus_I2C_Busy Previous transmission still not finished. + * @retval kStatus_I2C_Timeout Transfer error, wait signal timeout. + * @retval kStatus_I2C_ArbitrationLost Transfer error, arbitration lost. + * @retval kStataus_I2C_Nak Transfer error, receive NAK during transfer. + */ +status_t I2C_MasterTransferBlocking(I2C_Type *base, i2c_master_transfer_t *xfer); + +/* @} */ + +/*! + * @name Transactional + * @{ + */ + +/*! + * @brief Initializes the I2C handle which is used in transactional functions. + * + * @param base I2C base pointer. + * @param handle pointer to i2c_master_handle_t structure to store the transfer state. + * @param callback pointer to user callback function. + * @param userData user parameter passed to the callback function. + */ +void I2C_MasterTransferCreateHandle(I2C_Type *base, + i2c_master_handle_t *handle, + i2c_master_transfer_callback_t callback, + void *userData); + +/*! + * @brief Performs a master interrupt non-blocking transfer on the I2C bus. + * + * @note Calling the API returns immediately after transfer initiates. The user needs + * to call I2C_MasterGetTransferCount to poll the transfer status to check whether + * the transfer is finished. If the return status is not kStatus_I2C_Busy, the transfer + * is finished. + * + * @param base I2C base pointer. + * @param handle pointer to i2c_master_handle_t structure which stores the transfer state. + * @param xfer pointer to i2c_master_transfer_t structure. + * @retval kStatus_Success Successfully start the data transmission. + * @retval kStatus_I2C_Busy Previous transmission still not finished. + * @retval kStatus_I2C_Timeout Transfer error, wait signal timeout. + */ +status_t I2C_MasterTransferNonBlocking(I2C_Type *base, i2c_master_handle_t *handle, i2c_master_transfer_t *xfer); + +/*! + * @brief Gets the master transfer status during a interrupt non-blocking transfer. + * + * @param base I2C base pointer. + * @param handle pointer to i2c_master_handle_t structure which stores the transfer state. + * @param count Number of bytes transferred so far by the non-blocking transaction. + * @retval kStatus_InvalidArgument count is Invalid. + * @retval kStatus_Success Successfully return the count. + */ +status_t I2C_MasterTransferGetCount(I2C_Type *base, i2c_master_handle_t *handle, size_t *count); + +/*! + * @brief Aborts an interrupt non-blocking transfer early. + * + * @note This API can be called at any time when an interrupt non-blocking transfer initiates + * to abort the transfer early. + * + * @param base I2C base pointer. + * @param handle pointer to i2c_master_handle_t structure which stores the transfer state + * @retval kStatus_I2C_Timeout Timeout during polling flag. + * @retval kStatus_Success Successfully abort the transfer. + */ +status_t I2C_MasterTransferAbort(I2C_Type *base, i2c_master_handle_t *handle); + +/*! + * @brief Master interrupt handler. + * + * @param base I2C base pointer. + * @param i2cHandle pointer to i2c_master_handle_t structure. + */ +void I2C_MasterTransferHandleIRQ(I2C_Type *base, void *i2cHandle); + +/*! + * @brief Initializes the I2C handle which is used in transactional functions. + * + * @param base I2C base pointer. + * @param handle pointer to i2c_slave_handle_t structure to store the transfer state. + * @param callback pointer to user callback function. + * @param userData user parameter passed to the callback function. + */ +void I2C_SlaveTransferCreateHandle(I2C_Type *base, + i2c_slave_handle_t *handle, + i2c_slave_transfer_callback_t callback, + void *userData); + +/*! + * @brief Starts accepting slave transfers. + * + * Call this API after calling the I2C_SlaveInit() and I2C_SlaveTransferCreateHandle() to start processing + * transactions driven by an I2C master. The slave monitors the I2C bus and passes events to the + * callback that was passed into the call to I2C_SlaveTransferCreateHandle(). The callback is always invoked + * from the interrupt context. + * + * The set of events received by the callback is customizable. To do so, set the @a eventMask parameter to + * the OR'd combination of #i2c_slave_transfer_event_t enumerators for the events you wish to receive. + * The #kI2C_SlaveTransmitEvent and #kLPI2C_SlaveReceiveEvent events are always enabled and do not need + * to be included in the mask. Alternatively, pass 0 to get a default set of only the transmit and + * receive events that are always enabled. In addition, the #kI2C_SlaveAllEvents constant is provided as + * a convenient way to enable all events. + * + * @param base The I2C peripheral base address. + * @param handle Pointer to #i2c_slave_handle_t structure which stores the transfer state. + * @param eventMask Bit mask formed by OR'ing together #i2c_slave_transfer_event_t enumerators to specify + * which events to send to the callback. Other accepted values are 0 to get a default set of + * only the transmit and receive events, and #kI2C_SlaveAllEvents to enable all events. + * + * @retval #kStatus_Success Slave transfers were successfully started. + * @retval #kStatus_I2C_Busy Slave transfers have already been started on this handle. + */ +status_t I2C_SlaveTransferNonBlocking(I2C_Type *base, i2c_slave_handle_t *handle, uint32_t eventMask); + +/*! + * @brief Aborts the slave transfer. + * + * @note This API can be called at any time to stop slave for handling the bus events. + * + * @param base I2C base pointer. + * @param handle pointer to i2c_slave_handle_t structure which stores the transfer state. + */ +void I2C_SlaveTransferAbort(I2C_Type *base, i2c_slave_handle_t *handle); + +/*! + * @brief Gets the slave transfer remaining bytes during a interrupt non-blocking transfer. + * + * @param base I2C base pointer. + * @param handle pointer to i2c_slave_handle_t structure. + * @param count Number of bytes transferred so far by the non-blocking transaction. + * @retval kStatus_InvalidArgument count is Invalid. + * @retval kStatus_Success Successfully return the count. + */ +status_t I2C_SlaveTransferGetCount(I2C_Type *base, i2c_slave_handle_t *handle, size_t *count); + +/*! + * @brief Slave interrupt handler. + * + * @param base I2C base pointer. + * @param i2cHandle pointer to i2c_slave_handle_t structure which stores the transfer state + */ +void I2C_SlaveTransferHandleIRQ(I2C_Type *base, void *i2cHandle); + +/* @} */ +#if defined(__cplusplus) +} +#endif /*_cplusplus. */ +/*@}*/ + +#endif /* _FSL_I2C_H_*/ -- cgit v1.2.3-8-gadcc