From ed46e1a38ae2de97b55c1843bad8b813bd4936e3 Mon Sep 17 00:00:00 2001 From: mindchasers Date: Sun, 7 Jul 2019 17:58:07 -0400 Subject: initial commit of private island ARM test suite --- drivers/fsl_cmp.h | 347 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 347 insertions(+) create mode 100644 drivers/fsl_cmp.h (limited to 'drivers/fsl_cmp.h') diff --git a/drivers/fsl_cmp.h b/drivers/fsl_cmp.h new file mode 100644 index 0000000..e228413 --- /dev/null +++ b/drivers/fsl_cmp.h @@ -0,0 +1,347 @@ +/* + * The Clear BSD License + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted (subject to the limitations in the disclaimer below) provided + * that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _FSL_CMP_H_ +#define _FSL_CMP_H_ + +#include "fsl_common.h" + +/*! + * @addtogroup cmp + * @{ + */ + + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +/*! @brief CMP driver version 2.0.0. */ +#define FSL_CMP_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/*! +* @brief Interrupt enable/disable mask. +*/ +enum _cmp_interrupt_enable +{ + kCMP_OutputRisingInterruptEnable = CMP_SCR_IER_MASK, /*!< Comparator interrupt enable rising. */ + kCMP_OutputFallingInterruptEnable = CMP_SCR_IEF_MASK, /*!< Comparator interrupt enable falling. */ +}; + +/*! + * @brief Status flags' mask. + */ +enum _cmp_status_flags +{ + kCMP_OutputRisingEventFlag = CMP_SCR_CFR_MASK, /*!< Rising-edge on the comparison output has occurred. */ + kCMP_OutputFallingEventFlag = CMP_SCR_CFF_MASK, /*!< Falling-edge on the comparison output has occurred. */ + kCMP_OutputAssertEventFlag = CMP_SCR_COUT_MASK, /*!< Return the current value of the analog comparator output. */ +}; + +/*! + * @brief CMP Hysteresis mode. + */ +typedef enum _cmp_hysteresis_mode +{ + kCMP_HysteresisLevel0 = 0U, /*!< Hysteresis level 0. */ + kCMP_HysteresisLevel1 = 1U, /*!< Hysteresis level 1. */ + kCMP_HysteresisLevel2 = 2U, /*!< Hysteresis level 2. */ + kCMP_HysteresisLevel3 = 3U, /*!< Hysteresis level 3. */ +} cmp_hysteresis_mode_t; + +/*! + * @brief CMP Voltage Reference source. + */ +typedef enum _cmp_reference_voltage_source +{ + kCMP_VrefSourceVin1 = 0U, /*!< Vin1 is selected as a resistor ladder network supply reference Vin. */ + kCMP_VrefSourceVin2 = 1U, /*!< Vin2 is selected as a resistor ladder network supply reference Vin. */ +} cmp_reference_voltage_source_t; + +/*! + * @brief Configures the comparator. + */ +typedef struct _cmp_config +{ + bool enableCmp; /*!< Enable the CMP module. */ + cmp_hysteresis_mode_t hysteresisMode; /*!< CMP Hysteresis mode. */ + bool enableHighSpeed; /*!< Enable High-speed (HS) comparison mode. */ + bool enableInvertOutput; /*!< Enable the inverted comparator output. */ + bool useUnfilteredOutput; /*!< Set the compare output(COUT) to equal COUTA(true) or COUT(false). */ + bool enablePinOut; /*!< The comparator output is available on the associated pin. */ +#if defined(FSL_FEATURE_CMP_HAS_TRIGGER_MODE) && FSL_FEATURE_CMP_HAS_TRIGGER_MODE + bool enableTriggerMode; /*!< Enable the trigger mode. */ +#endif /* FSL_FEATURE_CMP_HAS_TRIGGER_MODE */ +} cmp_config_t; + +/*! + * @brief Configures the filter. + */ +typedef struct _cmp_filter_config +{ +#if defined(FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT) && FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT + bool enableSample; /*!< Using the external SAMPLE as a sampling clock input or using a divided bus clock. */ +#endif /* FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT */ + uint8_t filterCount; /*!< Filter Sample Count. Available range is 1-7; 0 disables the filter.*/ + uint8_t filterPeriod; /*!< Filter Sample Period. The divider to the bus clock. Available range is 0-255. */ +} cmp_filter_config_t; + +/*! + * @brief Configures the internal DAC. + */ +typedef struct _cmp_dac_config +{ + cmp_reference_voltage_source_t referenceVoltageSource; /*!< Supply voltage reference source. */ + uint8_t DACValue; /*!< Value for the DAC Output Voltage. Available range is 0-63.*/ +} cmp_dac_config_t; + +#if defined(__cplusplus) +extern "C" { +#endif + +/******************************************************************************* + * API + ******************************************************************************/ + +/*! + * @name Initialization + * @{ + */ + +/*! + * @brief Initializes the CMP. + * + * This function initializes the CMP module. The operations included are as follows. + * - Enabling the clock for CMP module. + * - Configuring the comparator. + * - Enabling the CMP module. + * Note that for some devices, multiple CMP instances share the same clock gate. In this case, to enable the clock for + * any instance enables all CMPs. See the appropriate MCU reference manual for the clock assignment of the CMP. + * + * @param base CMP peripheral base address. + * @param config Pointer to the configuration structure. + */ +void CMP_Init(CMP_Type *base, const cmp_config_t *config); + +/*! + * @brief De-initializes the CMP module. + * + * This function de-initializes the CMP module. The operations included are as follows. + * - Disabling the CMP module. + * - Disabling the clock for CMP module. + * + * This function disables the clock for the CMP. + * Note that for some devices, multiple CMP instances share the same clock gate. In this case, before disabling the + * clock for the CMP, ensure that all the CMP instances are not used. + * + * @param base CMP peripheral base address. + */ +void CMP_Deinit(CMP_Type *base); + +/*! + * @brief Enables/disables the CMP module. + * + * @param base CMP peripheral base address. + * @param enable Enables or disables the module. + */ +static inline void CMP_Enable(CMP_Type *base, bool enable) +{ + if (enable) + { + base->CR1 |= CMP_CR1_EN_MASK; + } + else + { + base->CR1 &= ~CMP_CR1_EN_MASK; + } +} + +/*! +* @brief Initializes the CMP user configuration structure. +* +* This function initializes the user configuration structure to these default values. +* @code +* config->enableCmp = true; +* config->hysteresisMode = kCMP_HysteresisLevel0; +* config->enableHighSpeed = false; +* config->enableInvertOutput = false; +* config->useUnfilteredOutput = false; +* config->enablePinOut = false; +* config->enableTriggerMode = false; +* @endcode +* @param config Pointer to the configuration structure. +*/ +void CMP_GetDefaultConfig(cmp_config_t *config); + +/*! + * @brief Sets the input channels for the comparator. + * + * This function sets the input channels for the comparator. + * Note that two input channels cannot be set the same way in the application. When the user selects the same input + * from the analog mux to the positive and negative port, the comparator is disabled automatically. + * + * @param base CMP peripheral base address. + * @param positiveChannel Positive side input channel number. Available range is 0-7. + * @param negativeChannel Negative side input channel number. Available range is 0-7. + */ +void CMP_SetInputChannels(CMP_Type *base, uint8_t positiveChannel, uint8_t negativeChannel); + +/* @} */ + +/*! + * @name Advanced Features + * @{ + */ + +#if defined(FSL_FEATURE_CMP_HAS_DMA) && FSL_FEATURE_CMP_HAS_DMA +/*! + * @brief Enables/disables the DMA request for rising/falling events. + * + * This function enables/disables the DMA request for rising/falling events. Either event triggers the generation of + * the DMA request from CMP if the DMA feature is enabled. Both events are ignored for generating the DMA request from the CMP + * if the DMA is disabled. + * + * @param base CMP peripheral base address. + * @param enable Enables or disables the feature. + */ +void CMP_EnableDMA(CMP_Type *base, bool enable); +#endif /* FSL_FEATURE_CMP_HAS_DMA */ + +#if defined(FSL_FEATURE_CMP_HAS_WINDOW_MODE) && FSL_FEATURE_CMP_HAS_WINDOW_MODE +/*! + * @brief Enables/disables the window mode. + * + * @param base CMP peripheral base address. + * @param enable Enables or disables the feature. + */ +static inline void CMP_EnableWindowMode(CMP_Type *base, bool enable) +{ + if (enable) + { + base->CR1 |= CMP_CR1_WE_MASK; + } + else + { + base->CR1 &= ~CMP_CR1_WE_MASK; + } +} +#endif /* FSL_FEATURE_CMP_HAS_WINDOW_MODE */ + +#if defined(FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE) && FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE +/*! + * @brief Enables/disables the pass through mode. + * + * @param base CMP peripheral base address. + * @param enable Enables or disables the feature. + */ +static inline void CMP_EnablePassThroughMode(CMP_Type *base, bool enable) +{ + if (enable) + { + base->MUXCR |= CMP_MUXCR_PSTM_MASK; + } + else + { + base->MUXCR &= ~CMP_MUXCR_PSTM_MASK; + } +} +#endif /* FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE */ + +/*! + * @brief Configures the filter. + * + * @param base CMP peripheral base address. + * @param config Pointer to the configuration structure. + */ +void CMP_SetFilterConfig(CMP_Type *base, const cmp_filter_config_t *config); + +/*! + * @brief Configures the internal DAC. + * + * @param base CMP peripheral base address. + * @param config Pointer to the configuration structure. "NULL" disables the feature. + */ +void CMP_SetDACConfig(CMP_Type *base, const cmp_dac_config_t *config); + +/*! + * @brief Enables the interrupts. + * + * @param base CMP peripheral base address. + * @param mask Mask value for interrupts. See "_cmp_interrupt_enable". + */ +void CMP_EnableInterrupts(CMP_Type *base, uint32_t mask); + +/*! + * @brief Disables the interrupts. + * + * @param base CMP peripheral base address. + * @param mask Mask value for interrupts. See "_cmp_interrupt_enable". + */ +void CMP_DisableInterrupts(CMP_Type *base, uint32_t mask); + +/* @} */ + +/*! + * @name Results + * @{ + */ + +/*! + * @brief Gets the status flags. + * + * @param base CMP peripheral base address. + * + * @return Mask value for the asserted flags. See "_cmp_status_flags". + */ +uint32_t CMP_GetStatusFlags(CMP_Type *base); + +/*! + * @brief Clears the status flags. + * + * @param base CMP peripheral base address. + * @param mask Mask value for the flags. See "_cmp_status_flags". + */ +void CMP_ClearStatusFlags(CMP_Type *base, uint32_t mask); + +/* @} */ +#if defined(__cplusplus) +} +#endif +/*! + * @} + */ +#endif /* _FSL_CMP_H_ */ -- cgit v1.2.3-8-gadcc