From ed46e1a38ae2de97b55c1843bad8b813bd4936e3 Mon Sep 17 00:00:00 2001 From: mindchasers Date: Sun, 7 Jul 2019 17:58:07 -0400 Subject: initial commit of private island ARM test suite --- CMSIS/mpu_armv7.h | 197 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 197 insertions(+) create mode 100644 CMSIS/mpu_armv7.h (limited to 'CMSIS/mpu_armv7.h') diff --git a/CMSIS/mpu_armv7.h b/CMSIS/mpu_armv7.h new file mode 100644 index 0000000..aa180c9 --- /dev/null +++ b/CMSIS/mpu_armv7.h @@ -0,0 +1,197 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.0.4 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) + +#define ARM_MPU_AP_NONE 0U +#define ARM_MPU_AP_PRIV 1U +#define ARM_MPU_AP_URO 2U +#define ARM_MPU_AP_FULL 3U +#define ARM_MPU_AP_PRO 5U +#define ARM_MPU_AP_RO 6U + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk) | \ + (((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \ + (((Size ) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \ + (MPU_RASR_ENABLE_Msk)) + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DSB(); + __ISB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DSB(); + __ISB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif -- cgit v1.2.3-8-gadcc