1 files changed, 207 insertions, 0 deletions
diff --git a/utilities/fsl_debug_console.h b/utilities/fsl_debug_console.h
new file mode 100644
index 0000000..14dd3a0
--- /dev/null
+++ b/utilities/fsl_debug_console.h
@@ -0,0 +1,207 @@
+/*
+ * The Clear BSD License
+ * Copyright (c) 2013 - 2015, Freescale Semiconductor, Inc.
+ * Copyright 2016-2017 NXP
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted (subject to the limitations in the disclaimer below) provided
+ *  that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of the copyright holder nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Debug console shall provide input and output functions to scan and print formatted data.
+ * o Support a format specifier for PRINTF follows this prototype "%[flags][width][.precision][length]specifier"
+ *   - [flags] :'-', '+', '#', ' ', '0'
+ *   - [width]:  number (0,1...)
+ *   - [.precision]: number (0,1...)
+ *   - [length]: do not support
+ *   - [specifier]: 'd', 'i', 'f', 'F', 'x', 'X', 'o', 'p', 'u', 'c', 's', 'n'
+ * o Support a format specifier for SCANF follows this prototype " %[*][width][length]specifier"
+ *   - [*]: is supported.
+ *   - [width]: number (0,1...)
+ *   - [length]: 'h', 'hh', 'l','ll','L'. ignore ('j','z','t')
+ *   - [specifier]: 'd', 'i', 'u', 'f', 'F', 'e', 'E', 'g', 'G', 'a', 'A', 'o', 'c', 's'
+ */
+
+#ifndef _FSL_DEBUGCONSOLE_H_
+#define _FSL_DEBUGCONSOLE_H_
+
+#include "fsl_common.h"
+/*!
+ * @addtogroup debugconsole
+ * @{
+ */
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*! @brief Definition to select sdk or toolchain printf, scanf. */
+#ifndef SDK_DEBUGCONSOLE
+#define SDK_DEBUGCONSOLE 1U
+#endif
+
+/*! @brief Definition to select redirect toolchain printf, scanf to uart or not. */
+#ifndef SDK_DEBUGCONSOLE_UART
+/* mcux will handle this macro, not define it here */
+#if (!defined(__MCUXPRESSO))
+#define SDK_DEBUGCONSOLE_UART
+#endif
+#endif
+
+#if defined(SDK_DEBUGCONSOLE) && !(SDK_DEBUGCONSOLE)
+#include <stdio.h>
+#endif
+
+#if SDK_DEBUGCONSOLE /* Select printf, scanf, putchar, getchar of SDK version. */
+#define PRINTF DbgConsole_Printf
+#define SCANF DbgConsole_Scanf
+#define PUTCHAR DbgConsole_Putchar
+#define GETCHAR DbgConsole_Getchar
+#else /* Select printf, scanf, putchar, getchar of toolchain. */
+#define PRINTF printf
+#define SCANF scanf
+#define PUTCHAR putchar
+#define GETCHAR getchar
+#endif /* SDK_DEBUGCONSOLE */
+
+/*******************************************************************************
+ * Prototypes
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus */
+
+/*! @name Initialization*/
+/* @{ */
+
+/*!
+ * @brief Initializes the peripheral used for debug messages.
+ *
+ * Call this function to enable debug log messages to be output via the specified peripheral,
+ * frequency of peripheral source clock, and base address at the specified baud rate.
+ * After this function has returned, stdout and stdin are connected to the selected peripheral.
+ *
+ * @param baseAddr      Indicates the address of the peripheral used to send debug messages.
+ * @param baudRate      The desired baud rate in bits per second.
+ * @param device        Low level device type for the debug console, can be one of the following.
+ *                      @arg DEBUG_CONSOLE_DEVICE_TYPE_UART,
+ *                      @arg DEBUG_CONSOLE_DEVICE_TYPE_LPUART,
+ *                      @arg DEBUG_CONSOLE_DEVICE_TYPE_LPSCI,
+ *                      @arg DEBUG_CONSOLE_DEVICE_TYPE_USBCDC.
+ * @param clkSrcFreq    Frequency of peripheral source clock.
+ *
+ * @return              Indicates whether initialization was successful or not.
+ * @retval kStatus_Success          Execution successfully
+ * @retval kStatus_Fail             Execution failure
+ * @retval kStatus_InvalidArgument  Invalid argument existed
+ */
+status_t DbgConsole_Init(uint32_t baseAddr, uint32_t baudRate, uint8_t device, uint32_t clkSrcFreq);
+
+/*!
+ * @brief De-initializes the peripheral used for debug messages.
+ *
+ * Call this function to disable debug log messages to be output via the specified peripheral
+ * base address and at the specified baud rate.
+ *
+ * @return Indicates whether de-initialization was successful or not.
+ */
+status_t DbgConsole_Deinit(void);
+
+#if SDK_DEBUGCONSOLE
+/*!
+ * @brief Writes formatted output to the standard output stream.
+ *
+ * Call this function to write a formatted output to the standard output stream.
+ *
+ * @param   fmt_s Format control string.
+ * @return  Returns the number of characters printed or a negative value if an error occurs.
+ */
+int DbgConsole_Printf(const char *fmt_s, ...);
+
+/*!
+ * @brief Writes a character to stdout.
+ *
+ * Call this function to write a character to stdout.
+ *
+ * @param   ch Character to be written.
+ * @return  Returns the character written.
+ */
+int DbgConsole_Putchar(int ch);
+
+/*!
+ * @brief Reads formatted data from the standard input stream.
+ *
+ * Call this function to read formatted data from the standard input stream.
+ *
+ * @param   fmt_ptr Format control string.
+ * @return  Returns the number of fields successfully converted and assigned.
+ */
+int DbgConsole_Scanf(char *fmt_ptr, ...);
+
+/*!
+ * @brief Reads a character from standard input.
+ *
+ * Call this function to read a character from standard input.
+ *
+ * @return Returns the character read.
+ */
+int DbgConsole_Getchar(void);
+
+/*!
+ * @brief Debug console flush log.
+ *
+ * Call this function to wait the buffer empty and io idle before.
+ * If interrupt transfer is using, make sure the global IRQ is enable before call this function
+ * This function should be called when
+ * 1, before enter power down mode
+ * 2, log is required to print to terminal immediately
+ * @return Indicates whether wait idle was successful or not.
+ */
+status_t DbgConsole_Flush(void);
+
+#ifdef DEBUG_CONSOLE_TRANSFER_NON_BLOCKING
+/*!
+ * @brief Debug console try to get char
+ * This function provide a api which will not block current task, if character is
+ * avaliable return it , otherwise return fail.
+ * @param ch the address of char to receive
+ * @return Indicates get char was successful or not.
+ */
+status_t DbgConsole_TryGetchar(char *ch);
+#endif
+
+#endif /* SDK_DEBUGCONSOLE */
+
+/*! @} */
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus */
+
+/*! @} */
+
+#endif /* _FSL_DEBUGCONSOLE_H_ */